Alien Industrial Tyrannosaurus-Rex

　　 "It will be indefinitely later." Wang Bu was lucky.

　　 He rushed out of the gate like a gust of wind, opened the door, got in the car, started, kicked the accelerator to the end, and walked away.

Behind 　　, Princess Hulu was stunned and her mind went blank.

　　 "Huh? Where's Wang Bu'an? Why is it gone?" Beigong Yanying came from the side and said unexpectedly.

　　 "Leave him to death!" Princess Hulu squeezed out four words from the gap between her teeth.

　　 "Huh? What's the matter? He can't take it anymore?"

　　 "He is crazy!"

"what?"

　　 Bei Gong Yanying was completely confused.

　　 I said, what are you two doing?

　　 This is a fitness center! It is not the Hengdian Film and Television Base. Why your plot changes, even Gongdouju can't keep up?

　　 was about to ask what happened, but found that Princess Hulu had also left in anger.

　　 Beigong Yanying looked around, then looked at herself.

Is 　　 related to yourself?

　　 doesn't seem to be...

　　 Wang Buyan drove all the way back to his alloy factory.

　　 Yes, there are already many people here.

　　 Hongcheng Heavy Industry’s Fang Jianming brought in many technicians.

　　 They are studying each machine carefully, hoping to discover the mystery.

　　Unfortunately, they checked for a long time and there was no result.

　　 The machine itself doesn't even have a screw, so there is no opportunity for further inspection.

　　The control program of the machine is again controlled by Wang Bu'an. There is not even a button on the machine. They have no chance at all.

The only advantage of 　　 is that you can test various products as much as you want.

　　 For example, various alloys.

　　For example, polyimide.

　　Of course, there are also various carbon fibers, ceramics, copper alloys, memory particles, etc.

　　 Wang Bu'an walked over with a gloomy expression.

　　 Fang Jianming was a bit too much.

　　 These machines belong to Wang Bu'an.

　　 The people of Hongcheng Heavy Industry, have unscrupulously tested here, have they solicited his opinions?

　　 Entering the house to ask people, and to the temple to worship the gods, this is the most basic courtesy.

　　 "Mr. Wang!" Fang Jianming walked up with a big look.

　　 "Hello." Wang Bu'an was stern.

　　 "I want to buy all your machines." Fang Jianming said bluntly.

　　 "Ten billion dollars." Wang Bu'an nodded.

"what?"

　　 "Ten billion, dollars."

　　 "Mr. Wang, you laughed. How could it be so expensive?"

　　 "This is something I made myself. I can sell it for as much as I want. You can't afford it, so don't be silly."

"I……"

　　 Fang Jianming then realized that Wang Bu'an was angry.

　　 It seems that I am a little familiar? He hadn't communicated with Wang Bu'an before, and he was busy in his territory.

　　 But, do you have to be so angry?

　　 Study your machine, you have nothing to lose.

　　 "Sorry, Mr. Wang, we are also happy to see Lie." Fang Jianming said euphemistically, "If there is something wrong, I apologize to you, apology, okay?"

　　 "Thank you." Wang Buan said coldly, "Even if these machines are given to you, you will not be able to operate them."

　　 "That's impossible." Fang Jianming shook his head and said, "We have talents."

　　 "Then you guys try it." Wang Bu'an sneered.

　　 Fang Jianming was a little embarrassed.

　　 The attitude of the other party is obviously resisting.

　　 His anger can't help but gradually come up. Isn't he the boss of Hongcheng Heavy Industry?

　　 Looking at the whole country, Hongcheng Heavy Industry can definitely be regarded as the first echelon in terms of heavy machinery. This time I led a team to West Lake Province to discuss cooperation, and West Lake Province also sent a senior official to receive it. How old are you Wang Bu'an? Don’t you just have a few machines? What's so great about this old machine? The tail is going to the sky?

　　 If it wasn't for Wei Yunfei's face, he would be too lazy to get around here.

　　 still cooperating? Will Lao Tzu work with you? dream!

"let's go!"

　　 Fang gradually beckoned.

　　 Everyone immediately withdrew.

　　 Each of them has samples in their hands.

　　Some are hard alloy, some are storage particles, some are barium titanate ceramic, some are beryllium bronze, some are carbon fiber...

　　 I didn’t see the Wangbu installation work.

　　Sample, if you take it away, you will definitely be itching in the future.

　　 After you have tested the samples in detail, you will find out how wrong the choice today is.

　　 It's a pity, at that time, if you want to regret it, I am afraid it is too late.

　　 The person to replace you Hongcheng Heavy Industry has already appeared.

　　 Just after Fang Jianming left the team, another team appeared.

　　 "Hello. My name is Liang Penghai."

　　 "Hello. I am Wang Bu'an."

　　 "I am from Qianzhou Heavy Industry."

　　 "I know."

　　 Wang Buan nodded casually.

　　 Qianzhou Heavy Industry and Hongcheng Heavy Industry have always been in a competitive relationship.

　　Although the two sides cannot say that the competition is very fierce, they still have to compete hard. If one party fails, it will easily be eliminated by the market.

　　 Liang Penghai, the boss of Qianzhou Heavy Industry, is actually number one.

　　What character?

　　 villain.

　　 Yes, he is the villain.

　　 He has been surrounded by negative news many times. Why marry a female celebrity? Divorced a female celebrity? Which female celebrity is a junior again? The company is about to file for bankruptcy...

　　The most important thing is that this guy is only thirty-three years old this year. Sitting on a tens of billions group is simply a winner in life.

　　 There was a rumor that Bei Li Nan Liang. Bei Li was once the richest man in a certain province.

　　 Although Nanliang is not as high-profile as Bei Li, it is not inferior in female star stamp collection.

　　 Even, both of them are long and chubby, with narrow eyes.

　　 Beili relied on the iron and steel group to start, while Nanliang relied on the heavy industry.

　　 Qianzhou Heavy Industry’s main business is actually a little different from Hongcheng Heavy Industry.

　　 Hongcheng Heavy Industry mainly produces excavators, loaders and construction machinery.

　　 Qianzhou Heavy Industry had also relied on construction machinery in the past to start, but later found that the competition in this market was too fierce, so it entered another field.

　　This field is the internal combustion engine.

　　 mainly diesel internal combustion engines.

　　 In this industry, the leaders are Yuchai and Shangchai.

　　 Qianzhou Heavy Industry can only be ranked third. But Liang Penghai is a chicken thief, and his main area is large diesel engines.

　　 Don’t think that those large trucks with 50 tons or 100 tons are using large diesel engines. Actually not. Real large diesel engines are used on ships.

　　 Before nuclear power came out, diesel engines had the greatest power. Most of the large ships use diesel engines.

　　 Including those oil tankers with hundreds of thousands of tons at every turn, as well as container ships.

　　Qianzhou Heavy Industries, of course, does not have that great ability to produce those super scary diesel engines.

　　 Which is the largest diesel engine in the world?

　　Wärtsilä from Finland, the model is RT-flex96C super large engine.

　　 Fourteen cylinders!

　　Single cylinder displacement is 1820 liters.

　　 The single-cylinder power is 7780 horsepower.

　　 The total power is close to 110,000 horsepower. About 80 thousand kilowatts (KW).

　　 Is this number terrifying? Yes, it is indeed very scary. The deadweight of the diesel engine alone reached 2,200 tons. It consumes 15,000 liters of fuel per hour (cannot burn).

　　 Two such diesel engines can drive a huge aircraft carrier (for example, the former Kitty Hawk). The use of steam turbines for aircraft carriers takes into account various requirements, such as steam ejection. If it is purely from the power aspect, it is better to install a few more diesel engines. Four diesel engines with more than 300,000 horsepower are not too sour.

　　 At present, the world's largest (no one) container ship Emma Maersk (Emma-Maersk) is equipped with the Wärtsilä RT-flex96C engine. With the blessing of nearly 110,000 horsepower, the Emma Maersk can sail at a speed of 31 nautical miles per hour with a full load of 11,000 standard containers.

　　 As the saying goes, a good horse is equipped with a good saddle. The requirements of cargo transportation on vehicles will increase with the increase in weight. The fully loaded Emma Maersk is nearly 200,000 tons. If the engine cannot provide continuous surging power, the timeliness and safety of the cargo will not be guaranteed. . The time it took for this ship to travel from China to California in the United States was 4 days shorter than that of an ordinary container ship. Friends who have done transportation know that time is money in this industry. Four days will be a very big watershed.

　　Liang Penghai certainly doesn't have that great ability.

　　 His main focus is the 50-200 kilowatt level.

　　 can be used for heavy-duty trucks ~ www.wuxiaspot.com ~ can also be used for small ships.

　　The key is that there are not so many competitors at this level. Continuing on, that is the main scope of Shipbuilding Industry.

　　 "Boss Liang, where is the beauty next to you?" Wang Bu'an asked unceremoniously.

　　 "Hands are a bit tight these days, and they are reluctant to follow me." Liang Penghai said with a wry smile, "No money, who wants to play with you?"

　　 "Are you in trouble?"

"A little."

"can I help you?"

　　 "Yes. I need four samples. Crankshaft, camshaft, flywheel, impeller."

　　 "Yes. Give me the technical requirements."

"Ok."

　　 Liang Penghai handed Wang Bu'an a USB flash drive.

　　 has specific technical parameters. Among them, the crankshaft has the most parameters and the highest technical requirements.

　　 After all, it is the main core component of the internal combustion engine, and quality is very important. It bears the force transmitted by the connecting rod and converts it into torque to output through the crankshaft and drive other accessories on the engine to work. The crankshaft is subjected to the combined action of the centrifugal force of the rotating mass, the periodic gas inertial force and the reciprocating inertial force, so that the curved bearing is subjected to bending and torsion loads. Therefore, the crankshaft is required to have sufficient strength and rigidity, and the surface of the journal should be wear-resistant, work uniformly, and have good balance.

　　 In a word, it is tough enough. No matter how you toss, it will not deform, tear, or dislocate. The best steel and processing technology must be used to forge the best crankshaft. But judging from the current technical situation in my country, the truly high-end long-life crankshaft cannot be produced independently for the time being.

　　 The crankshaft is difficult to machine.

　　 because it is irregular.

　　 It must be a high-end CNC five-axis linkage machine tool.

　　 This is a test.