Alien Industrial Tyrannosaurus-Rex

　　 "Who is your grandfather?"

　　 "Ordinary people! Nothing special. Very kind."

　　 "Then why..."

　　 "He was a little irritated in southern Xinjiang, and he prefers to work with people. The last time he accidentally beat Wei Yunfei and lay in the hospital for half a year, he was very careful afterwards."

"I……"

　　 Wang Buan almost vomited blood.

　　天!

　　 lie down for half a year!

　　 No wonder Wei Yunfei looks so embarrassed, so pitiful.

　　Dare to love...

　　 I almost lost my life!

　　 It’s no wonder that he would repeatedly tell him to exercise and be prepared to resist beating. It turned out to be...

　　 Behind the lawyer Huang, there is really a devil!

　　 is still an old man!

　　 "You said, are there really martial arts masters in this world?" Wang Bu'an asked cautiously.

　　 "You have read too many novels." Huang Ruoxi looked at him with a smile.

　　 "I want to learn art from a teacher. I won't be beaten to death by your grandpa."

　　 "Then go and search slowly."

"Oh."

　　 Wang Bu'an had only a wry smile.

martial arts master?

　　 Guo Jing? Huang Rong? Think too much...

　　 Like Mr. Huang, who came out from the **** battlefield, he is a real master.

　　 This stumbling block is hard to deal with.

　　 He has no confidence at all.

　　 Fortunately, the opponent is the ultimate BOSS, he is not in a hurry for the time being.

　　 If it really doesn’t work, I will abduct Huang Ruoxi away and never go back to the capital to see where old man Huang can go...

　　 Ok, let’s take a look at the lithography machine data first.

　　The lithography machine presented by Cybertron is actually a complete chip production system.

　　 Design, testing, tape-out, testing, and finished products are all in it.

　　With such a lithography machine, we can design and produce the chips we need. Including mobile phone chips and computer chips.

The output of 　　 lithography machine is also once a week.

　　The original accuracy is 10 nanometers. After the upgrade, the accuracy is increased to 5 nanometers.

　　 Continue to upgrade, the accuracy is increased to 1 nanometer, 0.5 nanometer, 0.1 nanometer and so on. Up to 0.001 nanometers or more. That's picometer level.

　　The demand for lithography machines is simply the desert's desire for water.

　　 We need an advanced lithography machine too much.

　　 Oh, I was wrong. Not one.

　　 is ten, one hundred, one thousand, ten thousand...

　　 is not enough.

High-end projection lithography machines can be divided into stepping projection and scanning projection lithography machines. The resolution is usually between ten nanometers and several micrometers. High-end lithography machines are known as the most precise instruments in the world. There are lithography machines priced at 70 million US dollars. High-end lithography machines can be called the flower of the modern optical industry, and their manufacturing is so difficult that only a few companies in the world can manufacture them.

　　Foreign brands are mainly Dutch ASML (the lens comes from Germany), RBNikon (intel once bought Nikon's high-end lithography machine) and RBCanon. The low-end lithography machines used in production lines and R&D are proximity and contact lithography machines, with a resolution usually above a few microns. There are mainly German SUSS, American MYCRONXQ4006, and Chinese brands.

　　 To design mobile phone chips or computer chips, the lithography machine that needs to be used must have an accuracy of about 10 nanometers.

　　 However, the highest precision that our country can currently use (not possess) is only 28 nanometers.

　　 AMD’s CPU has been suppressed by intel for many years because AMD’s girlfriend (GF factory) is not strong! The 28-nanometer manufacturing process has remained unchanged for thousands of years.

　　 As a result, last year, AMD successfully increased the accuracy to 14 nanometers, which immediately fought a turnaround.

　　 Huawei wants to design its own mobile phone chip. But there is no advanced lithography machine.

　　 Xiaomi also wants to have its own mobile phone chip. But there is also no sufficiently advanced lithography machine.

　　 The technical blockade of foreigners is very severe, and it will not be easily sold.

　　The emergence of the lithography machine manufacturing center made this extremely high-end product utterly utterly utterly utterly broken.

　　 once a week! Can't it **** the streets?

　　The only problem is that you need to install, debug, maintain, and upgrade yourself.

　　 Therefore, the speed of promotion does not lie in how many lithography machines the manufacturing center can produce, but in its own installation speed and landing speed.

After 　　 Du Niang, Wang Bu'an found that the installation and debugging of the lithography machine often took one or two years.

　　 Can he proceed at this speed? Of course not.

　　 Only one platform a year, the day lily is cold. The production capacity of one unit a week was wasted.

　　 must speed up!

　　 must be stationed every Monday!

　　 But, there are hydraulic machines and CNC machine tools that need to be installed...

　　 The rhythm feels exhausted.

　　"Please choose the construction location of the 10,000-ton hydraulic press manufacturing center."

"and many more."

　　 Wang Buyan hurriedly checked relevant information.

　　Good fellow, this manufacturing center is really huge!

　　 It covers a huge area. The length is over 300 meters and the width is over 200 meters. At least 60,000 square meters of land area is required.

　　There are other packages. Such as warehouse, hoisting, parking lot, etc., at least 30,000 square meters or more.

　　 Fortunately, the land area rented before is large enough, otherwise, there is no place to put it.

　　A hydraulic press manufacturing center is so huge.

　　The lithography machine manufacturing center is estimated to be larger.

　　 There may be more manufacturing centers in the future.

　　 It may not take long, the place is already saturated, and it is necessary to go to other cities to open up sub-bases.

　　 A huge robot appeared.

　　 Its appearance is orange, a bit like a bumblebee.

　　 It is the control robot of the 10,000-ton hydraulic press manufacturing center. It can remotely control all hydraulic presses. And it communicates with the No. 1 robot wizard.

　　 After Wang Buyan chose the location, the huge manufacturing center began to teleport.

　　 Estimated delivery time is 60 minutes.

　　 is really huge, and it takes a lot of time.

　　 The transmission time of the previous machine is basically 5 minutes. The manufacturing center takes 60 minutes.

　　Look at the data of the lithography machine manufacturing center.

　　Good guy, it's bigger than a 10,000-ton hydraulic press manufacturing center.

　　 Its length and width are both over 300 meters. Covers an area of ​​more than 100,000 square meters. Together with other supporting facilities, it is a full 500,000 square meters.

　　 How big is this number? 0.5 square kilometers.

　　The area of ​​the entire industrial park is actually less than 10 square kilometers. A few more large manufacturing centers will probably be saturated.

　　 is indeed a machine from the planet Cybertron.

　　 is a big character first.

　　 Then, a light blue robot wizard appeared again.

　　 It controls the lithography machine manufacturing center.

　　 Wang Bu'an selected the location, and the lithography machine manufacturing center also began to transmit.

　　 Its transmission time is a full 90 minutes.

　　 "Are you uncomfortable? Or the food is not to your appetite?" Huang Ruoxi asked with concern.

　　 "Oh, I'm fine." Wang Bu'an returned his attention to reality. I picked up a little meal casually. To show that he has no requirements for meals.

　　 "If you have no appetite, let me buy you some hawthorn slices."

　　 "No need. I will buy it myself."

　　 "Then what do you want to eat? I will find a way."

　　 "Malatang?"

　　 Wang Bu'an almost blurted out.

　　 If there is one thing that is most tempting, it is barbecue and mala Tang.

　　 It’s like this early summer atmosphere, it’s sultry and sultry during the day, and only cools a little at night. Take Dumbledore and Lu Da with them, sit down on the street, have some barbecue, have some spicy and spicy, and have a few bottles of frozen beer, such a day, it is simply a happy fairy. The feeling of drinking is much more refreshing than that of Lafite in 1982.

　　 "It's noon, no." Huang Ruoxi said, shaking his head.

　　 "Okay." Wang Buyan thinks about it too.

　　 Mala Tang is something like that only at night.

　　 I want to eat during the day, sorry, I can’t help it. The same goes for barbecue. Those are all night patents.

　　 That is also his Wang Bu'an patent.

　　 Huang Ruoxi definitely doesn't like it.

　　 He wouldn't let Huang Ruoxi go to the street to eat these things.

　　 is not something bad.

　　 but it's easy to happen.

　　 Huang Ruoxi is too beautiful~www.wuxiaspot.com~ and has a sense of justice. If it attracts the attention of others, or if there is something she dislikes, then it will be a fight.

　　 "Attention..." Sasser suddenly issued a warning.

　　 "What's the matter?" Wang Buyan hurriedly asked.

　　 "Next, you may have a little bit of pain..." Sasser said in a harsh tone.

　　 "What are you going to do?" Wang Bu'an was amazed, "Don't mess around!"

　　 "We want to pass on some of our professional knowledge to you."

　　 "What do you mean?"

　　 "We hope you can become a communicator of Cybertron Planet technology."

　　 "What do you mean?"

　　"It means that we want to inject part of the scientific and technological knowledge into your mind and make you a professional."

"Oh."

　　Wang Bu'an was a little relieved now.

　　 turns out to be the hero in "Transformers"!

　　 His mind is full of strange theoretical knowledge. But all around can't understand. Everyone treats him like a monster. Even he himself felt like a fantasy.

　　 Will it feel good?

　　 Wang Bu'an feels pretty good anyway.

　　Since you can't be a happy salted fish, you should be an independent person.

　　 To be a person, you must have a character, no one else can value it!

　　 "Of course not." Shockwave said, "We want you to lead the development of the earth industry, not to make you a freak."

　　 "Oh, sorry, I think too much." Wang Buan apologized sincerely.

　　 "We want you to become a real scientist."

　　 "Thank you."

　　 "Okay, we are ready to start transferring knowledge."

　　 "Thank you."