Born In England

In the next few days, Li Lin began to frantically search for weapon design drawings in the 【WWI and WWII Weapon Design Collection】.

Because, ten years later, there will be a real big battle.

At that time, this battle will be fought for several years.

Now that he has time, he must produce a batch of weapons in advance for storage, otherwise he is afraid that when the battle begins and enters the continuation stage, the speed of production will not be able to keep up with the speed of consumption!

So, you have to stock up now.

Anyway, it is normal for this kind of guns and shells to be stored for ten and a half years.

"Among the existing weapons, the Kar98k rifle plans to produce 500,000 pieces within ten years! The M1 Garand rifle will produce 1 million pieces! In terms of ammunition, the 98K bullets will produce 5 billion bullets, and the M1 rifle bullets will produce 10 billion bullets. !"

Don't think that there are too many bullets. If you divide them up, each gun is only 10,000 rounds of bullets.

For mortars, 30,000 shells should be produced first, and for shells, 150 million shells should be produced first.

For the 75mm mountain cannon, 20,000 shells will be produced first, and 150 million shells will be produced first.

For 105mm howitzers, 8,000 shells will be produced first, and 100 million shells will be produced first.

For 150mm howitzers, 3,000 shells will be produced first, and 60 million shells will be produced first.

Camel fighter, the first production of 3,000.

For bombers, 5,000 will be produced first.

Airplanes are consumables for several times, and it is estimated that customers will need them very much!

For submarines, first produce 50 ships!

For machine guns, 20,000 will be produced first! For machine gun bullets, 15 billion rounds of bullets will be produced first!

For pistols, first produce 10,000! 10 million rounds of bullets are also produced first.

In terms of warships, 9 cruisers and 3 battleships will be produced first for the time being!

The above are all weapons owned by Li Lin's previous weapons company, and they are also produced and sold.

Ten years from now, there will be huge changes.

Therefore, Li Lin plans to find a new batch of weapons,

At that time, I believe that many customers will like it.

"First of all, in terms of firearms, the two types of submachine guns come out!" Li Lin thought to himself.

It would be embarrassing to produce only one model, after all, when both sides sell weapons, it would be embarrassing for both the enemy and us to use the same weapons on the battlefield. Therefore, two models must be produced, one for one side and one for the other. side.

Ha ha!

It seems that Li Lin quickly took a fancy to two submachine guns, namely the M1921 Thomson submachine gun. Of course, the first Thomson submachine gun was the M1919. After it was successfully developed, the earliest production model was the M1921, which appeared one after another. M1923, M1928 series submachine guns. Among them, the M1928A1 type was successfully developed in 1930, and a small amount of it was equipped with US imperialism.

Li Lin does not choose the too advanced M1928A1, but the second generation.

Overall length: 808-909 mm (31.8-35.8 inches)

Barrel length: 267 mm (10.5 inches), 368 mm (14.5 inches)

Theoretical rate of fire: Actual about 225-300 rounds/min

Effective range: 200 meters.

This one, Li Lin plans to sell it to England.

Well, it suits them well.

The other is the MP18 submachine gun.

Gun length: 815 mm

Gun Weight: 4.17 kg (Empty gun weighs 4 kg)

Feeding method: 20/32 rounds magazine (32 rounds of snail drum use 9 x 19mm Luger bullets)

Rate of fire: 400 rounds/min

Muzzle velocity 380m/s,

The range is 150 meters.

valley

This one has a faster rate of fire than the previous one, but the shooting distance is shorter, and each has its own advantages and disadvantages.

He plans to sell this piece to Deguo.

"The submachine gun is finished, what else is there?" Li Lin began to think.

The rifle does not need to be updated for the time being.

M1 Garand is also very advanced.

"For tanks, first choose a batch of light tanks to produce, and after a while, it's you!" Li Lin quickly took a fancy to a tank.

That's Tank 2.

parameter:

The front armor is about 30 mm thick on average, while the rear side armor is 16 mm; the turret is also made of this, the front edge is about 30 mm thick, and the rear side is 16 mm thick. The driver's seat is located in the left front of the vehicle body, and the turret is above the fighting compartment, which is slightly to the left. Its weapon is a 20mm Kwk30 cannon, which can launch PzGr.39 armor-piercing projectiles, PzGr.40 high-speed armor-piercing projectiles and Sprgr.39 high-explosive projectiles. 7.92mm machine gun ammunition.

At present, I don't want to come up with too advanced tanks for the time being.

This No. 2 tank is just right, a little more advanced than the tanks in World War I.

Of course, Li Lin can't make a tank that is too advanced.

The body of this tank is welded by surface-hardened steel plates, so it can still be produced when it is produced.

As for power, hehe, his company can even manufacture such a large marine diesel engine, so there is no problem with this small fuel engine.

"Produce 200 vehicles first to test the waters, and it will be difficult if they can't be sold!" Li Lin doesn't plan to produce too many.

After choosing and choosing, he chose another tank.

The "Matilda" Type 1 tank has a combat weight of 11 tons, a crew of 2, a length of 4.85 meters, a width of 2.29 meters, and a height of 1.87 meters. No matter in terms of size and combat weight, or in terms of the number of crew members, it can only be regarded as a row of light tanks.

Due to the limitation of design ideas, the main weapon is only one 7.7mm machine gun, and the firepower is too weak. Later, although the 12.7mm machine gun was replaced, because the original turret was too small, it was quite difficult for the crew to control the shooting. The power unit is a Ford 8-cylinder gasoline engine with a maximum power of only 70 horsepower (51.5 kilowatts) and a maximum speed of only 12.8 km/h, which is not much faster than a bullock cart.

Well, it can be sold to Yinglun and other customers at that time.

Let these two tank rookies peck at each other!

For this tank, 200 vehicles should be produced first.

After the tank was selected, the next step was the anti-tank machine gun, and three or four models were selected.

Then there are dozens of kinds of bombs, torpedoes, and all kinds of various kinds selected.

At that time, it will be developed and produced together!

after a month.

After Li Lin sorted it out, he threw all these design drawings to the R\u0026D departments of various companies, which made the employees of the departments dumbfounded.

Too much!

It is estimated that there will be a lot of overtime in the future.

Moreover, it is estimated that Li Lin's major companies will continue to produce in the next few years.

The major warehouses also need to be established, otherwise it would be really difficult to store so many things.

At this moment, if those potential customers in the future know that Li Lin is currently preparing for the business ten years later, they don't know how they feel.

It is estimated that Li Lin will be torn alive!

The days go on.

Another year passed in a flash.

Originally, in the steel business, a steel giant wanted to acquire Li Lin's company, but he refused.

After all, he is rich and powerful, and the other party has nothing to do with him.

Especially in the past few years, the steel output is self-sufficient, and the other party can't affect Li Lin's business!

Even, Li Lin has won two more iron mines in recent years!

Especially chalcopyrite, very much needed!

Bullets need brass to produce.