Born Tech Mad

In order to satisfy Ross, Major General Liu started to act immediately after getting the purchase orders.

The military's procurement of materials is highly efficient and extremely fast. Ross is a national treasure-level scientist and is extremely important to the country. When purchasing the things he needed, the military spared no expense. Even a small part was directly transported by military aircraft and delivered to the door.

It will take time to purchase the materials needed to manufacture the 'light source converter' and 'realistic projector', even if the military uses military aircraft to fly around the country 24 hours a day.

Taking advantage of his free time, Ross ran to the electromagnetic factory and turned on the electromagnetic unit himself, planning to manufacture a powerful 'high energy storage battery' first to provide power guarantee for the two instruments.

After working in the electromagnetic factory for a few hours, Ross used 'nano-titanium oxide' and 'nano-silicon oxide' to recompress a high-energy storage material with a density of more than five times.

The electricity storage capacity of these 'high energy storage materials' has reached the limit of these two nanomaterials. 5 times the nano high energy storage material, the density is hundreds of times that of ordinary materials, and the power storage capacity is also hundreds of times.

Roth wondered what would happen if these two materials were made into batteries for the smartphone and computer markets. The Spring Festival Gala is just around the corner, and Ross decided to use the super influence of the Spring Festival Gala to let the world see the ability of this 'high energy storage material' to help him advertise.

"Hehe, taking advantage of the large number of people during the Spring Festival, I will give the US mobile phone and computer market a big blow. If ordinary mobile phones and computers in our country use this kind of super energy storage battery. What Apple, Samsung, are ready to cry .Haha... This year, American computer and mobile phone manufacturers are having a hard time!"

Ross felt complacent for a while, and began to devote himself to the work of developing high-energy storage batteries.

Using sulfuric acid to etch the copper sheet and making the circuit board for the battery, Rose carefully made the battery from the two materials.

After being busy for more than three hours, Ross produced a mobile phone battery, only the size of a palm, with amazing power storage capacity, which can charge more than 100 kilowatt-hours at a time. In order to cope with the performance of the Spring Festival Gala, Ross specially made a DC and AC socket for this battery.

After the battery is made, ordinary chargers are too troublesome, and it takes hours to fully charge the battery.

Ross, who was in a hurry, directly turned on the "arc reactor", controlled the current, and fully charged the electric energy in one second.

"Damn it! If my 'Arc Reactor' has a charging function, it will be the most powerful charging treasure in the world. It is estimated that tens of millions of mobile phones in the country can be fully charged in one second!"

Satisfied for a while, Rose returned to the office with the manufactured battery in his pocket.

Ross asked Major General Liu about the procurement of materials.

Liu Dashan replied to Ross reluctantly, saying that many materials can only be made in Japan, so it will take time.

In desperation, Ross didn't want to waste time, and planned to sleep first to recover his energy, and then stay up late to work when the materials arrived.

Lying on the sofa in the office, Ross pressed the remote control, and the four huge screen walls began to switch to a picture of an ancient Jiangnan town. Ross lay on the sofa with his head in his arms, as if lying in a landscape painting.

The sound insulation in the office is excellent, and the noise outside cannot affect Ross. Playing some classical music again, under the sound of elegant strings, Rose relaxed and was soon hypnotized to sleep.

This sleep was the best sleep Ross has had since engaging in 'Electromagnetic Ejection'.

I got up energetically, and looked at the time, it was already three o'clock in the morning the next day, and it was pitch black outside.

Outside the office door, there are bags of purchased materials piled up. It is estimated that Lao Liu saw that he was asleep and didn't want to disturb him, so he put them outside the door.

"Hehe, I didn't expect Lao Liu to be like Zhang Fei in ancient times, with subtleties in roughness! He is also afraid of waking me up!"

Ross happily opened the door of the office, carried the materials and ran into the electromagnetic factory, and started to get busy with various tools.

The first thing Ross made was the 'Light Converter'.

In the universe, there are countless rays of light that are visible and invisible to human eyes. Even in the dark night, there are many rays of light.

But the light that the human eye can see is only part of it. Most of the light is invisible to meat, such as ultraviolet light.

The so-called 'light source converter'.

It is to convert some visible light into invisible light. Convert invisible light into visible.

In today's world, there has been research on this technology.

On December 10, 2012, the British "Daily Mail" reported a piece of news that the Canadian "hypetealth biotechnology company" has successfully produced an invisibility cloak, and they have made a breakthrough in quantum materials. And has been approved by the Canadian military and the Pentagon. But continued research is needed to fully mature the technology.

The "light source converter" developed by Ross has the same principle as the "quantum invisibility cloak" being researched by Canada and the United States.

Its principle is to change the refraction of light so that the light will not work after it hits the invisible material.

When the light does not work, even if the light hits the object, there is no reflection, and the human eye cannot see it.

Light is a kind of electromagnetic wave, light will be reflected, and photon energy will also be attenuated.

The technical principle of the light source converter is based on these two theories.

The design of this 'light source converter' is very important. It looks extremely flat on the surface, but in fact, it is composed of hundreds of thousands of concave-convex mirror absorbing materials that are too thin to be seen by the naked eye.

These concave-convex mirror materials can continuously refract electromagnetic waves to each other. During the refraction process, the photon energy is attenuated. If the photon energy is weak to a certain extent, it cannot form light, and it seems that the light disappears.

In addition, it also has a function of scattered reflection. The so-called scattered reflection means that after the light hits these tiny mirrors, these mirrors will disperse the light into points and refract them to another direction in the form of points. As a result, it cannot be reflected in the human eye, and it also creates an illusion that the human eye cannot see, and achieves the purpose of deceiving the eye.

Ross immediately started to manufacture the 'light source converter'.

This 'light source converter' is made of absorbing material, which contains tens of thousands of tiny glass fibers. It looks smooth like a mirror on the surface, but in fact it is composed of millions of concave and convex mirror surfaces that are invisible to the naked eye.

Under the control of the sensor, each mirror can fine-tune the angle, so as to refract the light to another direction without reflecting it to the human eye.

Because these concave-convex mirrors are so small that they must be seen with a magnifying glass. Therefore, at a distance of one meter, it is impossible to see these small changes clearly with the resolution of the human eye.

Ross began to hold a welding torch and weld various parts for the 'light source converter'.

The face-shaped 'light source converter' is connected to various sensors and small power vibrators. After being powered on, under the control of the chip, it can vibrate at different angles or at ultra-high frequencies.

Their shaking and trembling will drive the concave-convex mirror light-absorbing material on it to vibrate. At the ultra-high vibration frequency, the light will be refracted and attenuated by millions of mirrors in microseconds. In the last microsecond, the light that hits the mask, Doesn't necessarily work.

Ross uses dozens of chips to control all sensors, controllers, vibrators...

Once again, a radio wave identifier was implanted in the mask, and then a radio wave sensor was attached to his throat. This technology is similar to Hawking talking to a computer. Both use radio wave reading technology.

Ross does not need to make a sound, and can transmit the command he wants to issue to the "light source converter" through the radio wave situation. After receiving the command, it will transmit the command to the chip, and the chip controls each mirror to change the light.

After staying up all night, it took more than six hours. At around nine o'clock in the morning, Rose finally got out a 'light source converter' that looked like a mask. From the front, the mask was a human face. But on the back of the mask, there are countless sensors and wire circuits. It is composed of a main chip controlling dozens of small chips, and the program inside is very complicated.

In order to test the capability of the 'light source converter', Ross connected the light source converter to the computer and gave the chip an instruction.

The right face of the human-shaped mask suddenly trembled at a high frequency of hundreds of thousands of times per second. Its trembling caused the countless concave-convex absorbing mirrors on it to vibrate.

In the tremor, some photon energy is scattered and refracted, and some photon energy, in mutual refraction, the energy decays, and the microsecond disappears.

Just in the blink of an eye, the right face of the mask suddenly disappeared, as if covered by the night, only half of the left face could be seen.

"Not bad, the effect is not bad."

Ross was overjoyed, and immediately devoted himself to the development of the 'realistic projector'.

[Favorites are growing slowly, recommendation tickets are also unbearably slow, I have about 6,000 words even in two chapters! Depressed, can't code. 】