Born Tech Mad

After lunch, the four old experts kept their promise and stopped pestering Ross. They left reluctantly. When they left, they insisted on leaving their phone numbers to Ross, saying that if Ross had any difficulties, he could call him at any time. them.

Although these four old men were somewhat conservative in their thinking, their consciences were not bad. Ross didn't want to reject the old man's kindness, so he wrote down their numbers.

After the four old experts left, the villa finally returned to tranquility.

Ross didn't think about anything, went back to his room and fell into bed, and fell into a deep sleep. These days, Ross was exhausted to develop the 'arc reactor'. If he had time, of course he needed to catch up on sleep.

During this sleep, the sky was dark and the sky was dark. When he woke up the next day, Rose was full of energy, and the villa was quiet.

Ross thought that after those guys from the National Security Bureau reported their 'cold fusion' technology to the country, some high-level officials might call. But now everything is calm.

"Hehe, maybe those scientists from the Chinese Academy of Sciences are studying my 'arc reactor' through video! I heard that Chinese people have the world's best counterfeit ability. Those guys would not want to copy my 'arc reactor', and then don't pay a penny. Hua, get that technology."

"Haha...that's so naive. Let them study it slowly. No one can master this technology except me. Even if they dismantle my reactor into parts and observe it with a microscope, they still can't master this technology. technology."

"It's really cool to sleep! Don't waste time, let's use my electromagnetic device!"

Resting for another day will not be of much use. It is better to finish the work earlier and then rest. Ross, who has an absolute concept of time, simply put himself into the research of electromagnetic devices again.

The electromagnetic devices purchased by Tan Li have already been partially completed, and Ross decided to start working on this thing from now on.

Putting on his overalls again, Ross got to work again.

This electromagnetic device is divided into two parts, inside and outside.

The entire electromagnetic device has two sets of equipment, except inside, there are two electromagnetic walls with a length of five meters and a height of three meters. There is also a huge ring device with a diameter of twelve meters on the outer layer.

This ring device uses the tokamak device technology, which was mastered by the Soviet Union in 1954. Humans can use the tokamak device technology to confine electromagnetic and plasma.

This huge superconducting tokamak device technology is composed of dozens of huge toroidal electromagnetic coils, once they are energized. The generated magnetic force will be projected onto the electromagnetic wall.

The electromagnetic wall absorbs these magnetic forces and accelerates the magnetic force, which can instantly increase the magnetic force by 300 times.

The inner layer is two huge electromagnetic walls. According to Rose's design, the height of the electromagnetic wall reaches three meters and the length reaches five meters. All of them are composed of electromagnetic modules, and there are about hundreds of electromagnetic modules. Each electromagnetic module weighs hundreds of kilograms.

The magnitude of the electromagnetic force has a great relationship with the number of turns of the coil and the amount of current. The more turns of the coil, the greater the magnetic force generated, and the fewer the turns, the smaller the magnetic force generated.

In the Marvel world, the coil material used in the magnetic device is made of nano-metal. The ability of this metal to withstand current is more than a hundred times stronger than that of ordinary copper wire. An electromagnetic rod the size of a finger is made of nano-wires, and the magnetic force generated can easily lift a train.

Ross does not have this kind of nano wire to make coils, he can only use the number to win.

There are hundreds of electromagnetic modules, and each module is wrapped with ordinary lacquered copper wires, which are densely wound tens of thousands of times. Once energized, the magnetic force generated by each electromagnet is equivalent to ten times that of the magnetic crane.

Cooperating with the giant superconducting tokamak device on the outer ring, after the electromagnetic wall forms a magnetic force multiplier, an electromagnetic module, the magnetic force generated reaches a terrifying stage. In a vacuum environment, it can automatically suck a car from a hundred meters away.

When hundreds of electromagnetic modules are activated at the same time, the magnetic force generated by the magnetic wall is even more terrifying.

But this is not enough, Ross' plan is to completely concentrate the magnetic force of the entire electromagnetic wall, so that the resulting magnetic force will be extremely powerful.

To concentrate the magnetic force generated by the magnetic wall, Ross needs a magnetic concentrator. This involves advanced electromagnetic reflection technology, which has been applied in the industry. Many metals have the ability to reflect electromagnetic waves. For example, the metal mesh on the induction cooker can reflect electromagnetic waves. Besides that, almost any metal can reflect electromagnetism.

Ross uses a unique technology to mix and melt dozens of different metal materials in proportion, and then mixes with 12 kinds of precious rare earths to melt a super-strong magnetic reflection material. Then use these materials to make a mirror.

When the magnetic wall throws the magnetic force to the mirror, the magnetic reflection device will concentrate the magnetic reflection to a point or a surface, forming a magnetic concentration.

In addition to magnetic reflection and concentration, the environment is also important. Air resistance will affect electromagnetic acceleration, so the most ideal state is to let this electromagnetic concentration be in a completely vacuum environment.

Rose's design is to use a huge tempered glass cover to drain the air inside and put it in a vacuum state. The magnetic force is then concentrated into this vacuum enclosure.

In addition to technical reasons for this work, technical parameters are also very important. When hundreds of magnetic devices generate magnetic force at the same time, how to make the two magnetic forces repel and balance each other is also the most important point.

Hundreds of electromagnetic modules have been purchased, and these magnetic modules have been wound with coils according to Rose's requirements. Saved Ross a lot of time.

Use the aerial crane to lift an electromagnetic module and place it in the scientific research room where the location has been drawn.

Ross began to install wiring for this electromagnetic module. Before the power is turned off, these modules cannot generate any magnetic force.

The entire electromagnetic device, the core technology, only has a few steps.

The first step: the manufacture of the giant superconducting tokamak device in the outer ring, the second step: the manufacture of the magnetic wall, the third step, the magnetic reflection, the fourth step: the concentration of the magnetic force, and the fifth step, the balance of the magnetic repulsion.

Ross intends to develop the center's set of devices related to the electromagnetic wall first, and start with the simplest work, assembling the electromagnetic wall first. This least technical work requires a serious attitude.

When assembling the magnetic wall, it must be seamless, so that after all the modules are combined, they form a smooth mirror surface like a mirror, allowing the magnetic force to be released at the same time. If the position is slightly off by 0.01 mm, the magnetic release cannot be synchronized. Magnetic force cannot be concentrated. A small difference in size can affect the full play of the magnetic force.

Ross devoted himself to his work. After each electromagnetic module was assembled, he would hold an instrument to measure whether the distance reached the standard. Ross completes every job with a strict, serious and responsible attitude, even if it is a job that does not require technical content.

Time passed by every minute and every second, and after three days of unknowingly working by Ross, this simplest job was completed.

Looking at the two smooth electromagnetic walls with a height of three meters and a length of five meters in the scientific research room, Ross was very satisfied.

If you don't look at it with a magnifying glass, these modules are almost a whole. The two electromagnetic walls are controlled by a hydraulic device. Under the control of the computer, the hydraulic device like a jack can make the electromagnetic wall flexible, can move back and forth, left and right, and can be tilted. This is done in order to cooperate with the release of the magnetic force to form different sizes. electromagnetic force field.

"The simplest one is done. Let's start with magnetic reflection, magnetic concentration, magnetic repulsion and magnetic balance. The outermost ring-shaped superconducting tokamak magnetic acceleration device, save it for last!"

Rose wiped off his sweat and started to get busy again, working hard for the next step of the magnetic reflector.

Another day later, when Ross was busy, Tan Lin suddenly called. He had mortgaged Lihua Group and helped Ross get a loan of 60 million RMB. The interest rate reached 0.7%, and the monthly interest alone would cost the bank four to five million yuan.

"It's a two-pronged approach, let Sister Li also help me purchase genetic equipment at the same time."

Ross happily left the research room, suspended work, went to the bank, and signed the loan contract. After signing the loan contract, Ross returned to the experiment and gave Tan Li another procurement task.

After thousands of purchase orders were handed over to Tan Li, Ross looked at the frowning Tan Li, smiled, and went back to the research room to continue his work.

Unknowingly, about ten days have passed, Ross has just completed the manufacture of the electromagnetic reflection device, and is preparing to invest in the manufacture of the magnetic force concentration device.

A military helicopter suddenly landed in front of the Tan family villa.