Born Tech Mad

Staring at the small piece of thin special steel made by Ross, Tan Li tilted her head and looked at it like she was looking at a rare animal.

She murmured like a little fool: "Student Ross, besides being hard, wear-resistant, resistant to blows and pressure, what are the benefits of this special steel?"

"There are many advantages. For example, a knife made of special steel can cut iron like mud, and can easily cut any metal. Cutting steel bars is as easy as cutting fruit. Ah! When it comes to knives, I suddenly thought of it. Bear Grylls made a special saber. Sister Li, go and buy me an ordinary saber."

Tan Li blinked her big eyes, a little confused: "Didn't you say you want to make a knife for Bell? Why do you still ask me to buy a knife!"

Ross laughed a bit badly: "As the saying goes: 'Good steel is used on the blade'. I only need to coat the blade, blade back, and blade body with a layer of special steel, and I can make ordinary sabers extremely sharp and cut iron like mud. , invincible. If all the knives are made of special steel, it is not cost-effective, and the weight of the knives will increase too much, and it will be inconvenient to carry. Go and buy one for me."

Tan Li smiled and nodded: "You don't need to buy it. My father was a soldier and has collected a lot of military daggers and sabers. They are in my father's bedroom downstairs. I'll go and grab one."

"Well, let's go."

Tan Li obeyed Rose's order and ran downstairs quickly. A few minutes later, she ran back with a Type 65 military dagger in her hand.

Ross took the dagger and played with it for a while, then threw the dagger to Tan Li.

Ross picked up the piece of special steel, walked to the front of the high-temperature furnace, and threw the steel into it. The only shortcoming of this piece of special steel may be that the high temperature resistance has not been improved much. The melting point of ordinary steel is between 1400 degrees and At about 1600 degrees, the special steel manufactured by Ross has a melting point of about 2200 degrees, and it will still melt when encountering high temperatures.

Of course, if Ross wants to manufacture special steel with higher temperature resistance, it is also very easy, just add other alloys.

Start the high-temperature electric furnace and increase the temperature to about 3000 degrees, and Ross slowly waits for the special steel to melt.

In about seven minutes, the temperature of the high-temperature electric furnace rose to 3,000 degrees, and the special steel sheet the size of a washbasin inside melted again into a liquid state.

Gently opening the valve of the electric furnace, the melted special steel turned into crimson molten iron and flowed out. Ross couldn't wait to take the dagger from Tan Li's hand.

As if dipping in soy sauce, Rose picked up a steel brush, dipped the molten steel, and brushed it on the blade, back and blade of the saber.

After working for about three minutes, after carefully brushing the entire saber with a thin layer of special molten steel, Ross threw the saber into the cold water, and blue smoke rose. After a while, the molten steel cooled and solidified, and Ross picked up the saber.

After adding special steel, the weight of this saber doubled, and the blade exuded a cold blue light.

"Master Pei's saber has been manufactured successfully, Sister Li, let me show you how sharp this saber is."

Ross happily threw the saber at the concrete floor in the scientific research room like throwing a dart.

With a snort, the extremely sharp special saber plunged into the concrete floor. Except for the handle, the entire blade sank into the concrete floor.

"Ah! This knife is so fast, the cement is as brittle as tofu in front of it." Tan Li was shocked.

"What is this, Miss Li, take this knife and cut something else."

"Okay, I'll try."

Tan Li pulled out the saber from the ground, and took a closer look at the blade. It was intact, with no gaps at all. The hole in the knife hole on the concrete floor was as smooth as a mirror.

Encouraged by Ross, Tan Li took the saber and walked to the steel stacked in the corner of the scientific research room.

Picking up a steel bar as thick as a broom, Tan Li cut it off with a knife.

With a bang, a piece of steel bar was cut off and fell to the ground with a crisp sound.

"It's amazing! This knife is really sharp. When I cut steel bars, I felt that there was not much resistance. It was really as easy as cutting fruit."

Holding the saber, Tan Li was extremely happy. Excited, she cut ten times in a row.

A load of steel bars were easily cut off, and the fracture was as smooth as a mirror, while the blade of the saber was still brand new and shiny, without any nicks or curls remaining.

Ross was very proud: "Sister Li, now you know how powerful my special steel is. Haha... If I use special molten steel to brush the shell of your BMW, your BMW will immediately become a bulletproof car. Ordinary Bullets can't break special steel at all."

"Amazing, amazing."

Holding a dagger, Tan Li, who didn't like to play with knives, also excitedly played with it.

"Sister Li, please find a way to send this saber to Bell for me. Tell him, if he is willing to endorse the product Heat Rod for me, I will send him 10 of these sabers, plus $100,000!"

Tan Li pursed her lips and smiled: "Ross, you are so bad! Buy 10 sabers, brush them with special steel, and you can turn them into special sabers. It doesn't cost a lot of money. Can this... really make Bell fall in love?"

Ross is full of confidence: "I believe that Mr. Pei can't resist this temptation. Don't look at me, this saber is just a special steel brush. Its hardness, strength, and wear resistance are the most difficult in the world. Find the second one. Bell will definitely be tempted."

"Well, I'll find a way to find someone to contact Bell in a while. Ross, you've already manufactured special steel. Why don't you call my dad and ask him to come over and take a look? He'll be so excited."

"Of course, Uncle Tan provided the research and development funds for this special steel. Of course, I have to ask him to take a look. However, I don't want to call Uncle Tan now. I want to give him a surprise and give him special bearings directly." .”

Tan Li tilted her head and looked at Ross: "You don't want to buy a bearing, just brush it with molten steel."

"Of course not. How much is the ten million that Uncle Tan gave you now?"

"It's already been spent, and I have paid 300,000 yuan myself."

"What a good girl, it doesn't matter. From the 60 million yuan that Uncle Tan helped me loan, take 300,000 yuan to help me buy another 3D printer, and I will directly 3D print special bearings."

"Ross... We need a lot of craftsmanship to produce bearings. Can a 3D printer really print qualified bearings?"

Ross made a disdainful gesture to Tan Li: "Hmph! With my special steel, is it so difficult to manufacture bearings? Don't say that I don't need a 3D printer. I can make some molds with mud and pour molten steel directly to make bearings. special bearings."

Tan Li suddenly thought of something, and asked again: "Will a bearing made of pure special steel become very heavy? Although the hardness of your special steel is 10 to 20 times that of ordinary steel, but The weight has also increased a lot. If the bearings are too heavy, sales will also be affected.”

"This is an increase in density, so the weight has increased. You don't have to worry about this problem. I can control the hardness of the special steel, push the two electromagnetic walls forward by one centimeter, and the hardness of the produced special steel is twice that of ordinary steel. Push it two centimeters, and the compressed special steel has four times the hardness, which is easy to control. Your bearings don’t need to be too strong, just one or two times that of ordinary steel, and the weight won’t increase much. Besides, you need to reduce the weight , Use my special steel to make bearings, just reduce the thickness. Forget it, it’s not worth spending 300,000 yuan. I still use mud and lime to make a mold, and directly use special molten steel to manually manufacture a special bearing and give it to Uncle Tan to have a look.”

Tan Li was speechless. Lihua Company needed a lot of machines and a lot of people to produce bearings. And after this boy Ross created special molten steel, he only needed a mud mold to produce qualified special bearings, which sounds a little unbelievable. But isn't this guy in front of him always unbelievable.