Bright Sword: Opening Super God Sniper

The high temperature in the steel plant made Ye Ming and Vice President Peng seem to be in the scorching heat on the first day they came in.

In the forge shop of a steel mill, the heat is as hot as the heat.

One by one, sturdy men with open arms, holding huge iron tongs in their hands, made red iron pieces into long iron pipes little by little on the side of large forging presses.

These iron pipes, large and small, after forging qualified, will be cut twice, in order to become the right size barrel material.

There are also slender iron rods, which are forged by self-rotating robotic arms, which are the material used to forge the barrel.

Deputy Peng always saw such a large-scale forging factory for the first time, and when he was in the Huangyadong Arsenal before, all the barrels and barrels were hammered out by blacksmiths one by one with the hammer in his hand.

Moreover, on the Huangyadong side, it can only imitate and manufacture firearms, and in a month, it is impossible to make a few rifles.

Compared with what you see in front of you, the forging of one barrel only needs one point to complete, plus the number of forging presses, this forging workshop alone can create three or four thousand barrels a day.

The forging speed of the barrel is not slow, and the forging is still large-caliber howitzer barrels, or tank barrels.

Such a barrel as a mortar, which is rolled up and welded with iron sheets, is not forged at all.

Before arriving at the military factory, just coming to the No. 1 workshop of the steel forging factory already made Vice President Peng quite excited.

“A long time ago, I wondered how weapons in other countries were produced, thinking that they were also made of parts little by little with hammers, but later I learned that people originally used machines, which would really be stupid!” Vice President Peng said with some self-mockery.

“Mr. President, so we must work hard, we can’t let our future generations also have ignorant insights, education to rejuvenate the country, science and technology to strengthen the country!” Ye Ming said solemnly.

“Education rejuvenates the country, science and technology strengthen the country, well, these eight words are too good.” Vice President Peng was a little excited, and then laughed happily.

Ye Ming also laughed, laughing happily.

Defeating the little devil has never been the fundamental purpose of his coming to this era, and defeating the little devil is only a passing thing.

And he came to this era in order to be the rise of China, in order to make the magnificence stand on the top of the world nation.

This is the worst era and the darkest era of the Chinese nation, but it is also the era of greatest opportunity.

If it was just to drive away the little devil, then Ye Ming had already launched another attack on the little devil when the Independent Field Army had combat effectiveness.

But he did not do so, and he needed more, to try to achieve the great rejuvenation of the nation.

After watching the No. 1 forging workshop, Ye Ming took Vice President Peng to the processing workshop.

The No. 1 processing workshop, and the forging workshop, it is simply a heaven and an underground.

Bright lights illuminate every corner inside, and in the processing workshop, huge CNC lathes are neatly arranged in the workshop.

Above the lathe, there are slide rails and cranes, which lift the barrels sent from the forging workshop to the lathe, and then carry out fine processing of the barrels, directly forming the pipe as a whole.

Modern high-precision lathes and numerical control technology make the environment here seem to return to the modern factory of the 21st century at once.

Vice President Peng has never seen such a beautiful machine, and saw a worker on the side of a lathe loading a thick solid iron rod into the lathe, pressing the start button on the CNC panel, the hatch of the lathe closed, and the processing inside began.

Vice President Peng, who approached, was surprised to see that the huge drill bit inside was very fast. The incomparably hard steel drilled a huge round hole.

Looking at this round hole, Vice President Peng knew at a glance that this was the barrel of a 155-mm howitzer.

And this huge iron rod also has a huge cube at one end.

After the drilled iron rod, the inside became very smooth, and at this time, the machine began to pull the rifling again.

From the time the drilling was successfully drilled to the time the rifling was pulled, the whole process took only five minutes.

“This is too fast, I have seen the most skilled master in the arsenal before, it takes two days to drill such a barrel, and if you pull out the rifling, it takes five days, seven days to complete this step, but here it only takes five minutes.”

And the whole process is so smooth, with such a barrel, it is strange that this 155-mm light field howitzer is so accurate in fighting. ”

When Vice President Peng couldn’t help but sigh, the brake and smoke extractor on the barrel of the gun barrel were also integrated on the barrel.

Even the gun chamber was processed together.

After watching the processing of the gun barrel, Ye Ming took Vice President Peng to the second floor of Workshop No. 1, where the CNC machine tools are all five-axis linkage machining centers.

Take Vice President Peng to one of the machining centers, which is processing a lot of parts for artillery and firearms.

“This is a machining center with extremely high technology content and half a century of precision leading global technology.

This processing center system has an insignificant influence on a country’s aviation, aerospace, military, scientific research, fine equipment, high-precision medical equipment and other professions.

At the same time, this kind of machine tool, only we in the world, five-axis linkage CNC machining center system is the only way to deal with impellers, blades, marine propellers, heavy generator rotors, turbine rotors, large diesel engine crankshafts and so on.

All kinds of equipment manufacturing industry is the pillar of a country’s industry, which provides important methods for the development of new technologies, new products and modern industrial production, and is an indispensable strategic industry. Even thriving industrialized countries attach great importance to it. ”

Speaking of this, Ye Ming emphasized very proudly: “If nothing else, such a machining center, the role of a country’s industry, is definitely comparable to a million troops, he not only has the advanced science and technology of machine tools leading any country in the world for at least fifty years, its processing accuracy is enough to let us lead the world for a hundred years.”

They are truly priceless treasures and the most important cornerstone of the industrial development of the motherland. ”

PS: After being put on the shelf, ten changes a day for thirteen consecutive days, the code word is really not easy, there is no manuscript, insisting on ten more every day is really gritting my teeth and insisting, I hope everyone can support more, just come with some flowers and evaluation votes! _

To see the ununderlined version of the novel, please download Feilu Xiao