Comrade, Your Ingredients Are Too Complicated
Chapter 16 New Decision-Making and Scientific Research
What is unlocked closely behind new decisions are scientific research projects.
Huang He sent all three small lathes to the rear of Qin Province. After all, the base area he was currently in was not safe and could be transferred at any time.
In the past, the copper needed in the base area was mainly met by cutting telephone lines from the Japanese army, as well as copper coins, incense burners, candlesticks and other copper utensils donated by the public.
In order to encourage people to actively donate military raw materials, the base area has adopted a paid purchase method. The Logistics Department has specially divided clear purchase prices for 19 types of military materials.
However, relying on the copper obtained from private factory trade and the location of the copper mine in the rear area, there is no shortage of raw materials for the time being.
Now it can be said that everything is ready and all we need is the east wind.
Huang He finally decided to put the expansion of the bullet factory on the agenda, and strive to get the entire army and divisions away from the transitional period of reloading bullets as soon as possible.
On November 29, the original three scientific research projects were completed.
Considering that the current troops have no air superiority and no organic anti-aircraft firepower, if a factory is built, it is likely to be targeted by the enemy's air power.
In this case, a research option would be useful.
"Discrete Industry Type 1: By decentralizing industry, we can ensure that it is difficult for the enemy to target each of our precious factories in wartime.
Time required for study: 70 days
Effect:
Regional maximum industrial value: +20%
Productivity maintenance: +10%
Base production efficiency: +5%
Factory output: +10%
Factory bombing vulnerability: -15%"
Discrete industry is very suitable for the motherland, which has a vast territory and abundant resources. It not only improves production efficiency, but also protects the safety of the factory area to a certain extent.
It is a big loss to keep using private factories to exchange for raw materials.
Even though the current copper reserves are not bad, with the development of the rear industrial zone, independent mining of copper mines is inevitable.
Nowadays, only very primitive methods can be used to mine in the rear areas.
In this era when there are no excavators or drilling rigs, comrades rely solely on two hands and a pickaxe.
The motherland has a vast territory. Although some resources are not very rich, they are basically complete in terms of variety. If these things can be used rationally, the starting point for industrialization will be very high.
Although the current base area is said to be backward in basic disciplines, there are still some aspiring young people and technicians at the high-end level.
It is a pity that there are no professional talents in mining engineering.
Huanghe has focused its attention on this scientific research.
"Mining Technology Type 1:
Advances in mining technology have made it possible to extract resources from locations that were previously inaccessible.
Effect: Friends who had not seen each other for a long time finally returned to the embrace of their motherland from the European continent. Looking at their devastated hometown, they decided to dedicate everything they had learned.
Obtain one mine construction technician, coal mining technician, ventilation technician, geological technician, surveying technician, and electromechanical technician.
Time required for study: 70 days
Strategic resource acquisition rate: +10%"
Of course, lathe-related technology needs to continue to be researched, and it is still far from assembly line operations.
"Improved machine tools: Although the machine factories in the rear area can provide us with the equipment needed by some factories, the industrialization of the base area cannot be achieved with just one equipment factory.
Turret-type hexagonal lathes have proven to be indispensable for mass production. Ensuring efficient manufacturing and use of turret lathes will bring significant advantages to the industrialization of the base.
Effect: Turret Lathe, drawing +1
Time required for study: 70 days
Maximum production efficiency: +10%"
After allocating scientific research slots, Huang He looked at the decision tree again.
In fact, he really wants to build some tanks or a tank factory.
As the king of land warfare, tanks are very suitable for the current battlefield, and motorized and mechanized troops are the future trend.
First of all, the Japanese do not have any anti-tank weapons at the current stage. Before the official war with the Ugly people, the funny anti-tank mine was not developed.
Secondly, the Japanese tanks are mainly light tanks.
However, due to the lack of anti-tank weapons in various war zones in the country, these small tanks and Japanese industrial scrap metal are running rampant on the land of China.
Once this thing appears on the front battlefield, comrades can only choose to kill it with human lives.
If we can get some tanks of European origin, it will definitely be a dimensionality reduction blow.
Finally, it is because the Eighth Route Army has no shortage of oil at all.
Records of oil in the rear area can be traced back to the Han Dynasty, and are mentioned in Ban Gu's "Han Shu" of the Eastern Han Dynasty and "Mengxi Bi Tan" by Shen Kuo of the Song Dynasty.
The petroleum industry was started in the late Qing Dynasty.
In 1905, the Qing government allocated funds to establish the Yanchang Petroleum Official Factory in Yanchang. It was at this time that the modern domestic petroleum industry began.
In 1935, the troops arrived at the extension.
With the recognition of comrades from oilfield workers, Yanchang Oilfield is still operating normally. Before the Yumen Oilfield was built, it was the only oil field in China.
However, tanks cannot be operated by just picking up a random person. The current cultural level of comrades in the base area is generally not high, and the cost of learning is too high, let alone tank-tank coordination.
Moreover, Huang He has always remembered what the professor in his previous life told him: in everything he does, he must be down-to-earth and not too ambitious.
The food must be eaten one bite at a time. The technology tree can be a little skewed, but the composition of the troops cannot be skewed.
Infantry is always the priority.
Huang He could only reluctantly give up the tank line and continue to develop the army's light and heavy weapons.
"Focus on the development of light weapons: Given that individual weapons are still the basic equipment of our army, our limited resources must be mainly invested in the equipment of advanced firearms.
Effect:
After France surrendered, it was obtained:
MAS-36 rifle production line, blueprint * 1
FM-24/29 light machine gun production line, blueprint * 1
Obtain the subsequent unlocking rights of the Gallic Army's weapons"
Huang He was still very satisfied with the benefits of this decision, because he knew that the Gallic's new equipment during World War II was not bad.
They dared to call themselves the strongest army in Europe, and their military technology must be very good. The functions of many standard firearms were actually ahead of Europe.
However, the new weapons were not mass-produced, resulting in the troops' replacement speed not being fast enough. In the end, they were beaten to their doorstep by San Dezi, and most of the soldiers were still using antiques from World War I.
The Gallic chickens were defeated too quickly, resulting in the excellent performance of the firearms not being brought into play. Many new equipment were seized when they were 90% new, and finally they were cheapened by San Dezi.
The caliber of the bullets of these two weapons is the French 7.5×54 mm machine rifle bullet. In the chaotic caliber of the Gallic Army, it is a breath of fresh air.
The birth of the MAS-36 rifle was to replace the previous Lebel M1886 bolt-action rifle.
This new weapon has excellent human-machine efficiency, is easy to use, has high accuracy and is low cost.
The gun is equipped with a bayonet. When the bayonet is not in use, it is inserted into a metal tube under the barrel like a cleaning rod. When it is used, it can be pulled out and turned around and inserted.
Moreover, the bolt of this gun is very smooth, and a skilled soldier can turn it into a human semi-automatic.
It can be said to be the best bolt in World War II, the last glory of the bolt-action rifle.
"The gun is a good gun, but the original users are all cowards. The blood of French men seems to have been shed during World War I. I directly breastfeed France"
The FM24/29 light machine gun is to replace the jam king Chauchat. Chauchat really has too many slots!
It refers to the feeding method of the Danish Madsen light machine gun, and the magazine is placed on the top of the receiver. It uses a 25-round magazine for feeding, and the theoretical rate of fire is about 450~550 rounds per minute.
It is worth mentioning that this gun is designed with two triggers, one for semi-automatic firing and the other for fully automatic firing.
FM24/29 is the main light machine gun of the Gallic Army. It actually looks like Bren, ZB26 and Type 99. However, there is no handle, and you need to hold it when shooting from the waist. This light machine gun is considered the glory of France.
And the subsequent unlocking permissions are also favored by Huang He. After all, mature equipment is better than exploring it yourself at this stage.
"Although the scientific research slot can also study local weapons, there is really nothing good. If you are interested, look for pictures on the Internet."
It is already December 1939, and a new wave of Japanese raids is coming soon.
The 386th Brigade has obtained a batch of new weapons, and the combat effectiveness of the three regiments has been improved.
"I don't know what kind of changes will happen to Li Yunlong when he meets the Bantian Corps this time. I hope he can be more aggressive and smart, so that this dog-skin plaster won't come to the clothing factory and hang around in front of me every day." Huang He touched his chin and muttered to himself. It was painful to write. I decided to skip a paragraph tomorrow and go straight to Cangyun Ridge! Please comment!
You'll Also Like
-
In Honkai Star Rail: I'm invincible with cheats.
Chapter 176 8 hours ago -
Cultivators in Honkai: Star Rail, join the chat group.
Chapter 281 8 hours ago -
Broadcast of the original amazing plot of Honkai: Star Rail: Starting from Pino Cone
Chapter 290 8 hours ago -
Collapse: Rebirth of Kevin, Collapse II Kai God King
Chapter 106 8 hours ago -
Collapse: Watching my simulation, why are there small pearls falling?
Chapter 473 8 hours ago -
Collapse: A monster girl at the beginning, shocking the star god
Chapter 321 8 hours ago -
White Hedge Dream
Chapter 309 11 hours ago -
Honghuang: Rebirth of Caiyunxian, Steady Becoming a Saint
Chapter 349 23 hours ago -
Knight Double Gate: Rise from the Plundering Item
Chapter 125 23 hours ago -
Ke Xue: I start the Night Parade of One Hundred Demons in Tokyo!
Chapter 527 23 hours ago