Duke of Grief

The patrol route and time in the R&D area of ​​Wind City have been fixed, and even accurate to terrible minutes and seconds!

In this area, there are four guards rotating at the same time. One of the guards patrols the outer wall and the guard gate. The remaining three guards will continue to patrol in the research and development area for four hours-after the six shifts, in order to let the guards To maintain better physical strength and energy, the twelve guards in the R&D zone are divided into three groups of shifts on duty. Each group can take an eight-hour break after one shift and then enter the next shift.

This kind of work system may be very frustrating, and the sixteen hours of rest are actually separated. It is just like using people as machines. The break time and working time are allocated rigidly, but in the eyes of intelligence personnel, this kind of work The shift system is too troublesome.

At the same time, the four guards on duty are divided into three teams, so that after the cross patrol, the sight can basically be spread across the entire R&D area, and the guards on duty at the door can also be checked through the cameras placed in each corner of the R&D area. Missing to fill the gap, in this R & D area has created an iron bucket, without any defense of missing.

According to other people's previous reports, this was not the case in the R&D area before. The guards did not need to patrol so frequently, and they were still in three shifts. Under normal circumstances, just staring at the camera was enough.

This frenzied work system is to ensure that the R&D zone is not invaded and peeped by foreign enemies, and was only recently implemented.

It is said that after seven days of work, the guards patrolling will be replaced with another group, so that the group of guards that have been suppressed for a long time can relax their mood and vent their pressure.

However, it is still not clear what the situation is. If this is the case, then the invasion will be the same no matter when.

Looking at the silver-gray wall in the moonlight in front of me, the'visitor' in gray robe sighed, this wall cut off the shuttle between the planes, and the outer wall was full of monitors ', monitoring every corner of the outer wall without dead ends.

The R&D area is surrounded by a tall wall. This wall is a polygon, and there will be an obtuse angle protrusion with a great angle at every distance. A monitor is placed above this protrusion.

This outer wall can sense anything attached to the wall, so within fifteen feet of the outer wall, no grass grows.

At the top of the outer wall, there is a power grid that surrounds the entire R&D zone. This protection seems to be insufficient for the maidservant, and a guard is added to only guard the mission of the R&D zone.

This is the most mysterious and dangerous place in the Duchy of Winds. This is the "Research Base" of the "Star Boat". Most research tasks and magic experiments will be carried out and completed here.

Boldly speaking, if this place is destroyed, the technological development of the whole mourning wind will stagnate for a period of time, which may be one or two years, or maybe ten years.

However, just like the protective devices in front of you, if you want to destroy this place, it is simply whimsical. Even if a legendary mage is close, you may not be able to destroy this place in a short time. If you cannot destroy this place in a few minutes. Place, then the head of the "Gems of China" knight who has been staying in Wind City will come as fast as possible-that is a legendary paladin.

Can't use the plane to shuttle, can't directly transfer, if you want to directly cross the outer wall, it will be seen by the monitor, all of this seems to be enough to block the invasion of outsiders.

However, it is not a day or two for the Eye of All Knowing to invade this place, they have already prepared for it.

Suddenly, the figure of the gray robe began to gradually fade, and eventually disappeared without a trace. At this time, the shadow of the outer wall of the main material plane slowly swelled up and immediately subsided.

Even the monitor did not capture these scenes. The incognito gray-robed man shuttled from the shadow plane to the main material plane in a creeping posture, which can ensure that the external image he exhibited during the shuttle was slight.

He stood up from the ground, his robe will not reflect any light, all light will be absorbed by the robe after coming to his side, which can ensure his invisibility.

This is not mimicry, but physical rules were used to make his figure disappear into this world. Only in this way, when he crossed the tall outer wall, wouldn’t it be too fast and the mimicry could not keep up, resulting in The situation of apparent difference appears.

The force field that absorbs light only covers the robe, which can cover his body without affecting the surrounding environment.

The gray robe's legs slightly bent, and it bounced off the ground. Even if the outer wall of the 30-foot-high R&D area was under his jump, it was easily conquered.

The toes fell quietly down without any sound, nor did they ignite any smoke...

Seeing this piece of dust under his feet, the gray robe was sweating and sweating. Unexpectedly, the maidservant was so insidious. After arranging so many things, there was a dusty ground behind the wall?

Taking a light breath, the grey robe pulled his toes out of the sand, and then used the footboard to smooth out the sandpit.

Fortunately, the boots automatically inspired [Light Body Technique] when he jumped up, otherwise, he would be exposed directly.

I glanced back. Sure enough, those monitors were still two-way, and the lens facing the outer wall was only a supplement. What really worked was the one inside.

The maidservant may have long thought of what method they might use to invade this place-this is not against them, but against all intruders.

The sand is very wide. These sands are all behind the wall, and they are still dry sand. As long as you step on it, it is basically a footprint.

However, the gray robe does not care about this. There is nothing that can stop a legendary rogue. He can control his strength and step on it without any mark.

They never anticipated this situation, and if they were not lucky enough, this action would have ended.

The stealth is not independent of the material plane. Otherwise, he will not be able to enter the R&D area. The space here has been completely blocked. If he does not have the authority, he will not be able to unlock it. Even if he can sneak in, he can’t be right. Anything in it interferes, then he has nothing to do here!

He has been invisible, but he can still interfere with the outside world, so this simple method is the most restrained.

The gray robe walked out of the sand, and he knew where his mission goal was this time.

Just like the tricks often played by the maidservant, she puts the most important things in the most inconspicuous places, and then protects them with strict means that ordinary people cannot even detect.

This time is no exception, as long as you carefully observe the patrol route of the guard, you can calculate where they are protecting the target~www.wuxiaspot.com~ This is not a difficult thing!

In fact, the "computing unit" produced by the Principality of the Winds of Sorrow is a good thing. When the mage in the organization modified this thing several times, it finally condensed it into a breastplate of the same size. thing.

It is slightly thicker than the heavy armor made of steel, but it can also be carried around. The most important thing is that as long as the corresponding parameters are entered, the target position can be calculated.

This was specially created by the organization for this operation. The magic power needed for the calculation was provided by a'magic board', which also came from the Principality of the Wind of Sorrows and was transformed by the organization, even the robe on his body. Otherwise, there is a magic anomaly somewhere in the R&D area, which may also be detected by the "fan lock" of Wind City.

As for how to collect the parameters, the mage in the organization also told him that he only needed to enter the collected parameters... The answer came out quickly.

Seeing the answer, the gray robe smiled and walked to the R&D area, entered the third laboratory from the door and turned left.

There is his goal!

(=)