Folk black technology boss

As time goes by, fewer and fewer people pay attention to future technologies on the Internet, and ordinary daily work life is the normal life of most people.

Although the news about Future Technology on the Internet is quiet, during this period of time, there has been constant action within Future Technology.

On the second day after the official Weibo release, Li Zhou asked Weixi to distribute the optimized version of the Star Operating System to every employee of Future Technology for internal testing by all employees.

Immediately afterwards, a group of company employees left the company and went to hundreds of factories across the country according to the list issued by Weixi.

These factories are all factories that Weixi has the ability to produce some accessories of photonic computers after big data analysis. As for the core of photonic computers - photonic chips.

The production line of photonic chips was decided by Li Zhou to be placed at -19F of Future Technology, and Weixi controlled the automated production of photonic chips.

For a while, the employees were discussing cooperation outside, while Li Zhou was working dirtyly on the photonic chip production line at -19F every day.

Many equipment on the photonic chip production line can only be produced in laboratories and cannot be purchased from outside.

For this production line, Li Zhou is like a car repairman in a car repair shop. He comes home from get off work every day and is all covered in black.

On June 15th, Li Zhou assembled the entire production line by himself.

Looking at the photonic chip production line that was only more than 20 meters long in front of him, Li Zhou felt a sense of accomplishment.

"Weixi, clean up the assembly line."

"Okay, boss."

Soon, under Li Zhou's order, Weixi controlled a crude crawler robot to start cleaning the assembly line.

Um! In Li Zhou's view, these robots are not robots at all. After all, they don't even have a chip. They are all controlled by Weixi. At best, these robots can only be regarded as mechanical equipment.

Weixi controlled the mechanical equipment and cleaned it inside and out for more than an hour.

Li Zhou, who waited for more than an hour, started all the equipment in the entire assembly line after cleaning it.

Looking at the continuously circulating assembly line, some fine-tuning is still needed.

"Weixi, feed the single crystal silicon into the microelectronic laser machine."

The microelectronic laser machine is the core of photonic chip production. In the microelectronic laser machine, the laser machine cuts the single crystal into thin pieces, and then produces the prototype of the photonic chip. Only through the subsequent assembly line can a usable chip be produced. The photonic chip, the assembly line is not finished yet.

In the last process, the photonic chips produced will be tested. If they pass, they will be preliminarily packaged. If they fail, they will be automatically pushed into the scrap recycling pile by the assembly line.

Weixi controlled the robotic arm to slowly put the single crystal silicon into the material port, and then added indium phosphide to the other material port.

The light-emitting properties of indium phosphide and the light-routing capabilities of silicon are combined into a single hybrid chip. When a voltage is applied to indium phosphide, light enters the silicon wafer's waveguide, creating a sustained laser beam that can drive other silicon photonic devices.

In this way, hundreds of millions of circuits can be formed in the chip to form a usable photonic chip.

With the input of materials, in less than ten minutes, prototypes of photonic chips began to be produced and flowed into the assembly line.

Li Zhou followed the prototype photonic chip that had just come out and circulated on the assembly line.

Reaching the final inspection process, Li Zhou found that all photonic chips were automatically pushed into the scrap recycling pile.

Li Zhou frowned and picked up a few photonic chips from the scrap recycling pile.

After careful observation, Li Zhou found that the solder joint on one side of the photonic chip was crooked.

Li Zhou compared the photonic chip and adjusted the automatic solder spot welding machine. It was obviously effective. However, the pass rate of the photonic chip was still not high, only less than 50%.

Li Zhou spent a whole day fine-tuning an assembly line of just over 20 meters. In the end, the pass rate of the photonic chip only reached 71%. No matter how Li Zhou debugged, he could never break through the 71% pass rate. .

Looking at the pass rate on the monitor, Li Zhou sighed lightly.

"Industrial precision cannot keep up. A pass rate of 71% is enough. Anyway, it is non-stop for 24 hours, so it should be barely enough."

"Boss, you are too demanding. How can a chip have a high pass rate once it is developed and produced? At least in Weixi's opinion, the 71% pass rate is already scary."

Li Zhou shrugged and said nothing.

"Weixi, keep an eye on the assembly line and put the qualified photonic chips in the warehouse. If you have any questions, contact me. I'll go home from get off work first."

After returning home, Li Zhou had dinner, took a shower, and then went directly to his room and fell asleep.

————

By the end of June, most of the accessories for the photonic computer had been found in foundries.

No factory can OEM parts for more than a dozen key parts, and some are kept secret. After all, Li Zhou has never applied for a patent. For these core parts, Li Zhou has no plans to apply for a patent yet.

As for those insignificant parts, the patents have been approved. It is precisely because Future Technology suddenly applied for a bunch of confusing patents that many netizens can't figure out what Future Technology is doing.

Hesitating that time was running out, Xiong Kexuan directly purchased two factories in the county and renovated the existing factories.

It is expected that within one month after the launch, that is, in early August, the acquired factory will be able to resume normal production.

As for the production of the foundry, the entire process will be monitored by Weixi, and even the drawings of accessories will be issued by Weixi in real time.

Once the factory is disconnected from the network, or the network cable is artificially cut off, the issued drawings will be automatically destroyed.

On June 28, there were only two days left before the press conference. On this day, Future Technology once again released an official Weibo.

——

Gather at the Future Technology Headquarters Building for the Future Technology new product launch conference!

Synchronous live broadcast link:

This time, the news about Future Technology’s new product launch was immediately forwarded by major media outlets.

The release of smart assistants has brought convenience to everyone, and many people are looking forward to this future technology conference.

For this press conference, Xiong Kexuan not only placed the conference venue in the super large conference room on the 15th floor (except for the fire escape and Youdao, there is only one super large conference room on the 15th floor.)

At the same time, with the consent of his boss Li Zhou, Xiong Kexuan booked two five-star hotels that had just opened in Huo County to provide accommodation for those invited to attend the press conference.

On the same day, invitations to the future technology conference were sent by express to invitees from each company and to multiple media units.

In Xiong Kexuan's office, everyone reported in an orderly manner all the preparations before the press conference and the emergency plan.