Genius of the Rules-Style System

Zhang Gangchuan received the news from his superiors and knew that the prototype would be transported to the Power Engineering Laboratory, so he regretted reporting it, feeling that it was like "losing a prototype."

In fact, he was not prepared to lose the prototype. He just thought that it would be enough to send the prototype over and let Zhao Yi take a closer look and study it and check the accompanying information.

The power engineering laboratory does not have enough conditions to make the engine run. It cannot even run, so it is naturally impossible to do other research.

So before Yuan Haitao brought his people over, Zhang Gangchuan said he would 'cooperate with all the work', but he just wanted them to go with him and come back in a few weeks.

Yuan Haitao's position is team leader and one of the high-end technical personnel in the R\u0026D team.

He cares more about prototypes than Zhang Gangchuan.

Only a few Kunlun engine prototypes were built in total. This one was built by Yuan Haitao. He went to the 508 Factory (Military Factory) responsible for production more than a dozen times and supervised the entire assembly process.

What Zhang Gangchuan cared about was that the Kunlun engine R\u0026D team was missing a prototype, or that it wasted a lot of time and money and did useless things. Yuan Haitao felt even more sorry for the prototype itself.

Now the prototype that has been built throughout the entire process will be dismantled.

Yuan Haitao knows better than anyone how complicated the Kunlun engine is. He doesn't even know if the prototype can start normally after being disassembled and put back together. But what is certain is that there will be more problems if you put it back.

But Yuan Haitao had no choice.

The order he received was to cooperate with the work throughout the process, and it was not just Zhang Gangchuan's order. The aviation group also sent people over to pay attention to the transportation of the prototype. He also emphasized that he would cooperate with Zhao Yi's work and that he could ask for anything. Skip Zhang Gangchuan and report to the top.

This represents the importance that superiors attach to Zhao Yi.

Therefore, their entire team came here to serve Zhao Yi, and even the prototype that was shipped here also served Zhao Yi. Not to mention Zhao Yi dismantling the prototype for research, even if Zhao Yi decided to throw the prototype into the water for inspection Whether it floats or not, they must do the same.

Because this is an order.

Yuan Haitao was so heartbroken that he couldn't breathe. He couldn't bear to look at the prototype again, so he just shouted the order to "dismantle", and then simply went elsewhere out of sight and out of mind.

After waiting for a long time, several engineers were waiting for someone to give instructions on how to proceed with the disassembly. Yuan Haitao came over. He held a thick document in his hand and handed it to Zhao Yi, "Academician Zhao, this is It’s the design information for the prototype. You can take a look first.”

Yuan Haitao probably calmed down and his expression became much more natural.

Zhao Yi knew that Yuan Haitao was very dissatisfied with his decision, and felt distressed about dismantling the prototype. He had been waiting patiently just now. Everyone must understand each other, and he would definitely be confused.

So, it’s okay.

He just nodded and went to look at the information. Yuan Haitao was responsible for the disassembly.

…

The disassembly of the Kunlun engine is a big project. Just looking at the outside, there are a lot of wires and pipes. After taking off the outer skin, there are very precise instruments inside, and no bumps are allowed.

No one else could get involved in this work, so only a few engineers could do it. Even Yuan Haitao could only stand aside and direct.

So the disassembly speed is still very slow.

Zhao Yi didn't pay attention to the disassembly work over there. He just sat in the distance and looked at the design materials carefully.

At the same time, he also became serious.

The reason why he decided to dismantle the prototype was because it was difficult to obtain "sufficient conditions" when looking at the whole. He had to understand all the components, and only then could he know how to improve it.

The information in hand is also very helpful.

The data is a detailed design drawing of the prototype, including the detailed structure of various components. He did not look at the structure drawing directly, but generally looked at the external pipes and circuit structure, that is, what can be seen from the appearance. There are names and functions of pipes and circuits.

This information is very useful. After only reading it briefly, Zhao Yi almost understood it.

He suddenly frowned.

Seeing Yuan Haitao standing in the distance, staring nervously at the disassembly work, Zhao Yi simply shouted, "Captain Yuan? Come here."

"coming."

Yuan Haitao quickly turned around and answered, and then immediately shouted loudly, "You must pay attention. Don't touch a screw to the ground. Even dust may cause problems."

After he finished speaking, he came over.

Several engineers on the spot exhaled depressedly, and one person directly answered, "I don't believe that the engine on An's plane doesn't even have a speck of dust. Not to mention dust, there's bird poop!"

"Our prototype can't compare. It has a lot of problems. And we also understand Team Yuan's mood. This prototype is his hard work. He originally planned to exhibit it last year, but gave up because of too many problems."

"Now that it has been directly disassembled into components, there will definitely be more problems when it is installed. In the future, the Kunlun engine will be displayed in the air. It probably has nothing to do with Team Yuan."

"Don't talk about Captain Yuan, it has nothing to do with us."

"Right."

Zhao Yi called Yuan Haitao over and started asking various external design questions. Many of the things he wanted to know were not available in the documentation, so he could only ask Yuan Haitao, who knew the prototype.

What he asked was not anything professional, just the installation of circuits and pipes. Most of them were related to the 'external position' of the design, for example, "Why is this pipe placed here? Why not put it a little higher?" Er? It intersects with this pipe inside."

"Are these two white ones supposed to be oil pipes? Or something else? It feels too abrupt to put them on top?"

"There are still these circuits, just piled up here. Why?"

Most of these questions Yuan Haitao couldn't answer because he didn't know who designed it. Later he simply said, "Our research is mainly about technology and design issues. We don't pay much attention to appearance. As long as the engine can run and can Just provide enough motivation.”

Zhao Yi understood pragmatism, but he still couldn't accept the 'too ugly' appearance. He said, "But what if something goes wrong? The exterior is so complicated, with a lot of things piled up together, it's not easy to find the problem!"

"That too."

Zhao Yi nodded, changed the topic, and asked, "How long will your disassembly work take?"

Yuan Haitao hesitated and said for a while, "Two days, about right? Three days is best. The facilities here are not very good. Wherever the parts are placed is a problem. Also, I have already reported to the superiors to adjust some basic machinery. Come here, it’s best to get some parts running so we can experiment.”

Zhao Yi gave Yuan Haitao a thumbs up and said with a smile, "That's what I want to say, Captain Yuan, I really have you."

Yuan Haitao smiled and said nothing.

In fact, he made the call because he knew it was going to be dismantled and asked the base to drop some basic equipment. He had never thought about it before. He just went there to 'calm down' and thought that since it must be dismantled into parts, Why not take the opportunity to inspect each component? Maybe we can find any problems and the assembly will be much better?

Maybe……

Anyway, it’s much better than tearing it down and doing nothing.

…

Zhao Yi read the information for a while and felt like he almost walked away. He couldn't do anything by staying here. He might as well go back and read the information and draw the 'appearance design' that appeared in his mind.

When he was studying 'bad appearance' just now, he had been looking at the function, location, etc. of circuits, pipes, and other components.

These are enough conditions.

With enough conditions, you can easily figure out the 'process' by using the "Contact Rate", that is, designing a perfect appearance. Of course, there is no such thing as perfection in appearance. After all, everyone's aesthetics are different, and perfection is Relative to Zhao Yi's aesthetics.

This ‘appearance design drawing’ is not too complicated, but because it involves many circuit lines, pipes and components, it is still a bit complicated to draw.

Zhao Yi returned to his dormitory and started drawing design drawings. It took him almost three hours to fully express what was in his mind on the drawings, but the specific parameters were not marked.

For example, how long the pipe is, what its proportions are, etc.

This is mainly because the design drawings are not used for the time being, and the prototypes have been dismantled into parts. It can be reassembled at any time, or a new set can be redesigned, and then the appearance design can be done.

Zhao Yi simply saved the picture in his computer so that he might be able to use it in the future, and then continued to read the information. He had been thinking about where to start to improve the Kunlun engine.

The initial idea was to use my own abilities, such as "Contact Rate" and "Supervisory Law", to find and solve problems for the engine, and make new designs and perfect plans, but if you think about it carefully, it is not a good choice.

One is that the engine is too complex.

This complexity does not mean that it cannot be completed, but the improvement of a certain component will cause the parameters of the component to change, which will definitely affect the operation of other components and even the entire engine.

In addition, new designs and plans may not necessarily be adopted, for example, due to technical limitations.

Even if the designs and plans he makes are more complete and more efficient than the original ones, the factory may not be able to produce them, because a better plan may involve higher technology, and high-efficiency components want to be effective. , maybe better materials should be used.

etc.

This affects the whole body.

Zhao Yi thought about it carefully and decided to make a major revision. Since he wanted to help improve the Kunlun engine, he must strive to do his best. The same is true for him in research, even in the application field.

Therefore, a process must be developed for improvement. We cannot say that we have perfected the first and second components. It turns out that the second component is perfected, but the first component will still be affected.

That certainly won't work.

Zhao Yi carefully looked at the engine design information and had a deeper understanding of the overall situation, and then knew where to start.