Genius of the Rules-Style System

Shen Binghe was so excited that he couldn't stop talking. After he learned that his design had increased the melting point of K03A, his mentality experienced a rocket-like jump.

He had been not optimistic about his design before, thinking that it would be good if the melting point of K03A did not drop too much.

That's all the requirements are.

In a new design of alloy materials, even if rare elements with higher melting points are added, due to changes in the manufacturing process, the melting point of the final product may drop, and sometimes the finished product may even turn into a pile of powder. Completely unable to blend together.

Of course that's a very rare case.

However, Shen Binghe had no hope for his own design. Among the people in the R\u0026D team, his ability, level, and experience were the worst, and his designs were also questioned by others. Indeed, as Wang Zhifang said, There are several places where I choose based on my feelings, without any support from theory or data.

Although Zhao Yi puts his design first, the reason is to use his design for trial and error.

This is a bit overwhelming!

It's like a poor student in the class. The exam is about to take place. No one is optimistic about his performance. The teacher decided to be the first to analyze his test paper. The reason is to "see what everyone generally did wrong." He seems to have become Negative teaching material, but after opening the test paper, I found...

Score, 99!

I said I was one point away because I was afraid of hurting others!

Shen Binghe felt incredible, but no matter how lucky he was, he got very good results anyway, and his mood suddenly became comfortable. He looked at the students who had top grades and usually looked down on him.

Ahem...

"If you don't agree, come and compete!"

Shen Binghe's mentality was like this. He was a little forgetful for a while. After his mentality calmed down a little, he still felt a little embarrassed, but he had already said the words and there was definitely no way to take them back. He simply ignored Academician Wang Zhifang and said to the other few If someone says something like that, it's no big deal as if it's a joke, since they are all about the same age anyway.

Just because Shen Binghe can pretend that Wang Zhifang doesn't exist doesn't mean that Wang Zhifang can pretend that he doesn't exist, because Shen Binghe's words include him.

"The villain succeeds!"

Wang Zhifang was depressed for a long time and finally held back a sentence, but he couldn't say anything.

Bibi?

What a joke.

Even with his self-consciously perfect argument, it is difficult to say that it can increase the melting point of the finished product, let alone how much it can increase, maybe by how many degrees? Or ten degrees?

It's hard to say.

Shen Binghe's design increased the melting point of K03A by about 30 degrees. In addition, the slow cooling mentioned by Zhao Yi is hundreds of degrees. Regardless of the factor of slow cooling, 30 degrees is also an amazing figure because of the added rare element rhenium. The mass only accounts for about two percent of the alloy.

Even if we do a simple calculation based on the mass ratio, the original melting point of K03A is 1431 degrees, and the melting point of the rare metal rhenium is 3180 degrees. A mass ratio of 2% can increase (3180-1431) * 0.02, which is about 35 degrees Celsius. Shen Binghe’s The design allows the rhenium element to play a significant role, and the slow cooling mentioned by Zhao Yi allows the rhenium element to play a very efficient role, causing the melting point of the finished product to soar by 60 degrees Celsius.

Wang Zhifang didn't even know what to say.

This result can already be released as a result, and it is a big result that can cause shock at home and abroad. The two K03A melting point improvement results released by 307 Steel Plant only increased the K03A melting point by a hundred degrees, but you must know that the increase from 1250 degrees to 1350 degrees and rising from 1430 degrees to 1520 degrees are not the same concept at all.

The former can only be said to be ‘a good result’, while the latter is ‘the top result in the world’.

Wang Zhifang simply ignored Shen Binghe. While he was depressed about Shen Binghe's success, he was also happy about the breakthrough progress in research and development.

Others were celebrating too.

Shen Binghe was indeed a little carried away, but the improvement in the melting point of the finished product was real. They continued to conduct strength tests and discussed excitedly, but there was no name 'Shen Binghe' in the discussion. "Academician Zhao still has a vision, no wonder he decided to use This plan.”

"Academician Zhao talked about trial and error. In fact, maybe he just thought this plan was OK and took care of our emotions before talking about trial and error."

"Yes, that makes sense!"

"Academician Zhao still has a vision! Trial and error is just to find a reason. It turns out that it is like this, I understand!"

"Did you watch the end? Academician Zhao directly said that using slow cooling technology, the melting point increased by 60%."

"This is ability, this is level!"

"It's definitely no problem to do research and development with Academician Zhao. Now it can be considered a big achievement, right?"

"..."

Zhao Yi stood nearby and watched, with a smile on his face, as if he didn't care about the results and knew everything.

In fact, he was also very surprised.

Melting point increase?

Is it to be expected that the melting point of the 'slowly cooled' material has increased, and that the melting point of the originally designed part has also increased?

"Isn't Shen Binghe very lucky?" Zhao Yi couldn't help but raise the corner of his mouth. He was really surprised. With this luck, he might be able to buy lottery tickets and win five million?

When he found Shen Binghe standing next to him, Zhao Yi nodded in approval, "Professor Shen, your design is really great."

"Thank you, Academician Zhao!"

Shen Binghe's face was still excited.

Zhao Yi's admiration came from the bottom of his heart, because Shen Binghe's design not only improved the melting point of the finished product, but also included several modifications, which led him to the conclusion that it was 'unhelpful' or even 'harmful' to the improvement of the finished product's melting point. It's just 'trial and error' that pays off.

When there are a few things in the design that are harmful to the result, but you end up with a finished product with an elevated melting point?

What does it mean?

This shows that there are steps in the process that are very helpful in increasing the melting point of the finished product!

The manufacturing process of K03A is too complicated. In some places, the Law of Cause and Effect can be used to directly draw harmful and beneficial conclusions. In other places, it may involve microstructure issues and no conclusion can be drawn at all.

So logical analysis is also very important.

Zhao Yi suddenly thought of a question, "If we correct the problems in the design and remove all the 'harmful' and 'useless' parts, will the finished product have a higher melting point and better performance?"

"You can try it!"

"However, let's wait until all tests are completed first..."

The test being done is also very important. The strength test is more complicated than the melting point test, and some high-pressure equipment is used as an auxiliary means. The test lasted for two hours, and finally the conclusion was drawn——

The strength of the finished product is reduced by about one percent.

Strength is directly related to the addition of rhenium. Metal rhenium is soft and is not perfectly combined with other elements in the alloy, which is likely to reduce the strength of the final product.

However, the one percent decrease in strength is still within the acceptable range. At the same time, the decrease in strength clearly shows that the rhenium element is not perfectly combined with other elements, which means that there is still room for improvement in the finished product.

Whether it is strength, melting point or corrosion resistance, there is room for improvement.

After the finished product performance test is completed, there will be an internal meeting, which will summarize the experimental experience and explain the next experimental plan.

He Guilin also participated this time. He is a representative of 307 Steel Plant and is not in Zhao Yi's R\u0026D team. However, the R\u0026D team cannot do without the support of 307 Steel Plant. He Guilin is also responsible for the experimental work. He will definitely not participate in the meeting. question.

“Professor Shen’s design is great!”

Zhao Yi affirmed the design immediately, "The melting point has increased by about 90 degrees, and the strength has decreased, but it is still acceptable. These two materials must be well preserved."

"Do you want to release the results?" He Guilin suddenly asked.

Zhao Yi gave him a strange look and asked doubtfully, "R\u0026D has just begun? This is our first experiment." What he meant was that it was just the first experiment. Even if the performance of the finished product was improved, it would not be a problem at all. No results.

Several people in the R\u0026D team were very indifferent.

Although the melting point of the finished product has increased, it is indeed the product of the first experiment. They also know that Zhao Yi’s goal is to create the most advanced nickel-iron alloy in the world with the highest melting point that can be assembled into the top turbine engines. The melting point of The goal must be more than 1,700 degrees.

Now it only exceeds 1,500 degrees, and the gap is still relatively large.

"Then the next experiment..."

Wang Zhifang suddenly asked, "Is it Li Rongmao's? Or is it Hong Tao's?"

Li Rongmao and Zhang Hongtao were both eager to try.

Wang Zhifang also took out a design and put it on the table as if to explain it. Everyone else knew that it was his design. Only Wang Zhifang did not explain it in the last meeting.

Zhao Yi felt that Wang Zhifang's face should be taken care of, but after thinking about it, he decided not to waste time. He said, "Academician Wang, the plan cannot keep up with the changes. The previous plan was for everyone to come up with a design and do four experiments in a row. But now Professor Shen The design has improved the performance of the finished product. We can see from the final test data that this finished product has a lot of room for improvement."

"So I have an idea. Let's conduct a detailed demonstration of Professor Shen's design together, demonstrate each step, and finally come up with a complete plan."

"Let's try the next experiment."

When the others heard Zhao Yi's thoughts, they looked at me and I looked at you with somewhat surprised expressions. They thought they would conduct experiments designed by others, but they did not expect that Zhao Yi's idea was to continue to demonstrate Shen Binghe's design. However, the experimental results show that Shen Binghe's design has outstanding features. It is indeed a good direction to find out the advantages of his design and make other corrections.

Li Rongmao and Zhang Hongtao both secretly felt it was a pity. They also hoped that their designs could be put into experiments to see how the finished products were, but it seemed that they were no longer needed?

They could find no reason to object.

If you think purely from a research and development perspective, what Zhao Yi said is the best choice.

Wang Zhifang put away the design silently with depression. He really hoped that the research and development would go smoothly, but he expected to be led by himself, at least by his own design. The result seemed to have completely changed. Even Zhang Hongtao's design was temporarily There is no 'chance to play'.

What else can be said now?

Wang Zhifang stopped talking at all and just expressed his emotions with silence. He couldn't say anything to oppose, and he was really depressed to support.

What Zhao Yi said is indeed a good direction. From a neutral point of view, everyone supports it. Next, we will start to demonstrate. The demonstration is to study Shen Binghe's design in detail to see where it may have a positive effect and where. It may have the opposite effect.

Zhao Yi did not directly participate in the argument, but acted as the 'main judge'. He was like an impartial adjudicator, and he did have decision-making power without participating in the discussion.

In fact, Zhao Yi roughly understood a few points.

He has already recorded some modifications that are harmful to the finished product, and they must be dealt with directly. It is too difficult to turn harmful changes into beneficial ones, so he might as well just give up.

Some modifications are "useless", but they can still be argued. Let everyone express their opinions freely, and perhaps the useless changes can be turned into advantages.

Even He Guilin participated in the demonstration this time. His participation is also very crucial because he has been doing research on nickel-iron alloys and has also done some research on adding new elements. He can provide some experimental data.

Most of the experimental data are failures, but they have certain reference value.

The argument in the conference room lasted until eight o'clock in the evening, and every issue was discussed for a long time. Finally, Zhao Yi looked at the time and decided to adjourn the meeting, "It's too late today. Remember to sort out the data tomorrow and continue in the afternoon. Our next experiment will be at least It’s next week.”

He briefly explained his work and ended the day's discussion.

…

Aviation R\u0026D base, Kunlun engine unit.

Some time ago, 307 Steel Factory announced that the melting point performance of K03A has been improved, and the engine group is also preparing for this. Last week they got a few pieces of finished products for testing, and then a lot of work of the R\u0026D team came.

The turbine unit needs to study and design a more suitable blade matching scheme based on the improvement of the turbine blade material performance; the power unit needs to adjust the energy output of the combustion chamber in order to fundamentally increase the maximum power of the engine.

etc.

The work of the power team is led by team leader Zhou Kai and veteran technician Gao Yaxin.

Zhou Kai and Gao Yaxin are both experienced technicians. Based on the performance parameters of the new K03A tested and fed back, they conducted detailed research on the fuel input control, air pressure, and partition design of the combustion chamber, and finally came up with a set of very Reasonable plan.

After the plan was submitted, Zhang Gangchuan, the head of the engine group, asked the two people to go to the conference center to make a report. After listening to the report, several senior technicians and leaders of the engine group felt that there were no problems with the design, and then signed and approved it directly.

Zhou Kai and Gao Yaxin walked out of the conference room together, with relaxed smiles on their faces.

Zhou Kai said, "As the performance of K03A improves, our supporting equipment will also improve. The power of the entire engine will definitely be greatly improved. We have also made a contribution to improving performance."

Gao Yaxin nodded and said, "The design has been passed directly. Next, we have to wait for the factory to create new samples."

"yes."

Zhou Kai felt very relaxed as he spoke. The work of their power team was indeed easy. When something happened, they were busy with design, and the rest of the time they could spend their time leisurely. There was no more leisurely group.

He thought and suddenly talked about Wang Zhiguo, "Xiao Wang has also worked hard. He went to the capital to design a 1700-degree combustion chamber control scheme with turbine blades. It was really interesting. Xiao Wang's level is still insufficient, and there is no point in doing this design. , it’s hard for him..."

"yes."

Gao Yaxin also sighed, and he added, "He is still young. If I were younger, I would go for him. It would be nice to see Academician Zhao himself. I saw the photo that Xiao Wang posted. He and Zhao The academicians have a group photo together." He said, suddenly feeling a little envious.

Although taking a photo with Zhao Yi is nothing, it is also used for bragging rights. Zhao Yi's reputation is obviously higher than that of his predecessors. If other people see the photo taken together, they will definitely take a high look. It seems that the research can be related to Zhao Yi. He also became taller.

Zhou Kai shook his head funny and asked, "How about you go too? Anyway, there's nothing much going on recently."

"No, no, no."

Gao Yaxin quickly shook his head, "As a person with a family, I won't be able to help much if I go there. I'd better let Xiao Wang come. Young people are in need of experience."

"It's good for young people to get some exercise." Zhou Kai also nodded, "Even if the design is of no use, just treat it as learning. Xiao Wang's level is still a little behind, and it can lay the foundation for future work!"

"yes!"

Gao Yaxin sighed and nodded, as if both of them were thinking about Wang Zhiguo, but in fact, they were just unwilling to go out and do research that was 'completely meaningless'.