Genius of the Rules-Style System

Nuclear fusion experimental base, working group control room.

Zhao Yi sat in front of the computer on the right side, checking the real-time parameters sent by the detector. The large amount of detection data made people feel numb, but he still browsed it very carefully.

Everyone else stood behind and watched.

At first, many people were scared. They felt that they were very close to the nuclear fusion device, just like how dangerous it was.

Of course, the danger does exist.

After staying in the work group for a while, everyone became calmer, because nothing unexpected happened and everything was running normally. The only thing that changed was the parameters displayed on the computer screen, which most people couldn't understand. of.

Zhao Yi continued to browse indifferently, then frowned and walked around the room, glanced at the contents of each computer screen, and carefully looked at the picture on the monitor.

His brows furrowed.

"How is it? Academician Zhao, have you found anything?" the senior leader couldn't help but ask.

Everyone else also looked over.

Zhao Yi shook his head slightly and continued to frown and think carefully. Everything in the test data was normal, and the components were operating normally.

In this case, normally there should be no problem with the output power.

Others were not surprised either.

Nuclear fusion devices are very complex. There are hundreds of detection devices alone, reporting various detection data.

Just looking at the test data is already making people’s scalp numb.

If there is a problem with a certain component, it is not easy to find it.

In addition, the nuclear fusion device is a newly manufactured complex reaction device. Even the personnel involved in the manufacturing of the nuclear fusion device do not dare to say that they have a comprehensive understanding of the device. If a small problem occurs, it will become a big problem.

It's like having a problem with a car and without an experienced mechanic, finding the problem requires a complete overhaul.

Zhao Yi ignored other people's thoughts. He just walked around the room, so he sat next to the computer again.

Others think it is normal not to find the problem, but he feels incredible that he has not found the problem.

He found that the internal components were operating without any problems, and there were no problems with the real-time data reported by the testing instruments.

So what's the problem?

"software!"

Zhao Yi suddenly realized that the nuclear fusion device was not just equipment and facilities, but also included an electronic control system.

Any complex device must have an electronic control system.

The internal reaction of the nuclear fusion device is realized by adjusting the anti-gravity performance. By adjusting the anti-gravity effect, the maximum speed of the particles can be controlled, and the conditions for the intensity of the internal reaction of the nuclear fusion can be achieved.

This adjustment is achieved through an electronic control system.

When the internal reaction is too intense, the electronic control system will automatically control it, increase the anti-gravity effect, and control the maximum speed of the particles to achieve the purpose of controlling the intensity of the reaction.

Now there is a problem of insufficient output power. It is obvious that the internal reaction intensity is not enough, and it is likely to be a problem with the electronic control system.

Zhao Yi immediately used the "Law of Cause and Effect" to get the answer.

really!

The electronic control system used in the nuclear fusion device was not perfect. There was a small problem in the internal algorithm, which caused the normal detection to be submitted and the calculated results to be deviated.

"I see!"

Zhao Yi knew what the problem was. He stopped and said immediately, "It should be a software problem."

"Software problem?" Everyone else looked over.

Zhao Yidao said, "I just checked all the detection parameters and found no problems. However, there is such a large deviation in the output power. It is likely that there is a problem with the algorithm of the internal electronic control system."

"Which group is responsible for the electronic control system?"

Everyone looked at Chen Zeshu.

Chen Zeshu thought for a while and said awkwardly, "It was designed by several experts from the technology department who are proficient in software."

He didn't name him directly because he knew it was a big problem.

Zhao Yi didn't care, and just said strangely, "Your group manufactures nuclear fusion devices. Don't you have a dedicated computer team?"

Chen Zeshu shook his head in embarrassment, "The design only requires an electronic control system. There is no problem with the hardware. I didn't expect that there would be problems with the algorithm."

Zhao Yi shook his head with a wry smile. He finally understood why the test data on the computer was displayed in such a mess.

The entire nuclear fusion device research and development team does not have a dedicated computer team to support it?

But it’s normal if you think about it carefully. Those involved in nuclear fusion manufacturing are experimental groups such as the Nuclear Research Institute and Z-wave. Considering the confidentiality issue, most of them are technicians, either mechanical engineers or nuclear physics researchers. There are experts in materials and power.

etc.

There may be a few experts who are proficient in computers, but the number is definitely very small, and there is no way to form a dedicated computer team.

Zhao Yi shook his head and said, "Academician Chen, there is no need to hold anyone accountable for this. I didn't think at first that there would be problems with the electronic control system. This is probably something we ignored."

Everyone else nodded.

Zhao Yi continued, "This is also a lesson learned. We can't just focus on hardware, materials, technology and other things. We must also pay attention to software. Software is soft power, and soft power is very important."

"Nowadays, any precision equipment is more important than a complete software system, such as a control system."

"Although the device does not require an overly complex algorithm system, an efficient system will make control and operation simpler and more accurate."

"For this problem now, there is no need to stop the experiment and build a new electronic control system. After the production is completed, use external energy facilities to minimize the reaction intensity, and then upgrade the system."

Zhao Yi directly stated the solution. He continued, "It is best to set up a special computer group to solve software problems."

Everyone else nodded.

The problem had been found and a solution had been thought of. Everyone took a long breath and left together.

The next day, the nuclear fusion experimental team held an internal meeting.

This meeting discussed issues that arose during the experiment.

Zhao Yi directly explained the problem and then suggested setting up a special computer group.

How to organize this computer group is a question.

Zhao Yi’s suggestion is to set up a special group to be responsible only for software-related issues.

"This team is necessary." Zhao Yi said seriously, "Not only the production of a new electronic control system, but also the subsequent maintenance is also a problem."

"In addition, I found that in many projects, there is a common problem of not paying attention to software."

"I paid attention to the display of the reported test data. It can be said that it is a complete mess!"

This is a fact.

Most domestic projects do not pay much attention to software facilities. Some cooperative computer laboratories only provide relevant algorithm support and do not care about interface display issues.

The work goals related to these software programs are only "can be used", "no problems", "comfortable to use" and "looks simpler" are not considered.

If it were in the civilian field, such as mobile phone software and operating systems, the manufacturing goals are just to be "usable" and "no problems," and the relevant manufacturers will only go bankrupt.

Of course, to a certain extent, there is no way around it.

This is a matter of work motivation.

If there is a dedicated computer group to support it, coupled with the attention of leadership, the situation will become much better.

The decision was quickly made at the meeting to establish a dedicated computer group.

Compared with the entire nuclear fusion device, maintaining a computer group is not a problem at all. This is a lesson learned after problems occur in the electronic control system.

End of the meeting.

The nuclear fusion device will continue to operate and will continue for a long, long time. The nuclear fusion research team will also continue to inspect, record, correct and other work.

Others can leave.

This experiment can be said to have achieved most of the success. The problem of insufficient power output occurred midway, which also affected the solution. It can be said that it is approaching perfection.

One week after the experiment ended, the nuclear institute announced the news of the experiment.

But the news they announced was the result of the last experiment——

Significant progress has been made in the development of nuclear fusion devices. The device was turned on for up to seven hours, achieving power output while maintaining the operation of the device!

The news was announced and immediately shocked the world.

The academic community has always believed that nuclear fusion is the future of energy, and many countries have invested a lot of money in nuclear fusion-related research and development.

After Zhao Yi disclosed the inert theory of antigravity particles, many related institutions invested in the research and development of anti-energy barriers.

Anti-gravity technology can degrade particles, which is the best way to control the internal reactions of nuclear fusion; anti-energy barrier can isolate energy, which is the best nuclear fusion isolation shield.

Together, these two technologies can theoretically achieve controllable nuclear fusion.

Controlling nuclear fusion in this way is much more promising than magnetic field control. One reason is that the control method is very effective and the controllability is very strong.

The second is that the cost is very low.

According to the previous magnetic field control theory, the cost of creating a perfect magnetic field control device is estimated to reach hundreds of billions of dollars.

This cost is divorced from reality.

Relatively speaking, neither anti-gravity technology nor the continuous maintenance of anti-energy barriers require high costs.

Now the relevant domestic research and development team has announced that the nuclear fusion device has made significant progress. One thing that needs attention is that the nuclear fusion lasted for seven hours.

This is of great significance.

As long as the nuclear fusion can be made to last for one hour, it can be extended to a longer time. If the reaction time can be made to last for seven hours, it can definitely be extended to a day, a month, or a year.

etc.

Technology will definitely continue to advance.

It can now be said that achieving controllable nuclear fusion is only a matter of time.

The research and development results announced by the Nuclear Research Institute have aroused heated discussions in the world's public opinion.

Ordinary people are concerned about the results. They feel that controllable nuclear fusion will soon be achieved, and energy will no longer be a problem.

This impact is too great.

For example, crude oil and natural gas plummeted.

Any field related to energy is no longer optimistic.

Those professional research institutions are concerned about the technology to achieve controllable nuclear fusion. There is no doubt that domestic research must rely on anti-gravity devices and anti-gravity barriers to achieve controllable nuclear fusion.

However, what they have been studying is how to maintain the anti-gravity barrier all the time?

Now the Mechanics Institute has the most in-depth research on anti-gravity barriers. They can make the anti-gravity barriers last for about an hour.

This seems to be the limit.

Another question is more critical, how to 'make a hole' in the anti-gravity barrier, or use other methods to transmit energy through the anti-gravity barrier?

This problem is even more difficult, and there is not even a research direction.

Many organizations immediately called again for the need to disclose anti-gravity barrier technology in China, and also stated that it was for the development of human energy.

Of course.

These calls make no sense at all.

After participating in the ignition experiment of the nuclear fusion device, Zhao Yi immediately returned to Zhengyang because he knew he would go to the capital soon.

After the nuclear fusion experiment was successful, the next step was to demonstrate the spacecraft project.

Zhao Yi hopes that the design of the spacecraft can be completed before the official meeting begins, which will increase the chips for establishing the project.

After returning to the base, Zhao Yi summoned everyone in the design team to explain the next work and gave a time limit, "Everyone should work harder. I hope to complete the design work within a week."

"Everyone should know that most of the design has been completed, and all that is left is the finishing touches."

"Every group must do its own work well. If you encounter any problems, come to me. I didn't ask for time before. Now everyone strives to work overtime and must complete it."

"This week, everyone will work harder. When the design is completed, I will apply for bonuses for everyone in our design team."

The last sentence was met with loud applause.

For world-class major projects, everyone is very motivated to work, but if there are high bonuses, the motivation to work will definitely be more sufficient. After all, we are ordinary people and still need to live.

Zhao Yi did not specify how much the bonus would be, but he estimated that it would be no problem to apply for several million.

This is mainly because the project funds consumed are very small.

So far, the spacecraft design project has only cost about 20 million yuan.

This is definitely very cheap.

Of course, the completion of the project design is not the end. In the follow-up, we still need to rely on the design framework, contact other research groups, and continue to experiment and demonstrate the manufacturing of core components.

This is where design consumes most of the money.

Other groups will make a series of adjustments to the design and manufacturing of various parts based on the spacecraft design plan.

soon.

Five days passed.

Zhao Yi has always been in the design team. Not only does the other people have to work overtime, but he also has more work content. He needs to review the designs of each group, and he also needs to put all the designs together to come up with the most reasonable one. composition plan.

The work is done for the day.

Zhao Yi was bored in the office and worked for seven consecutive hours. He walked out exhausted, holding a large stack of documents in his hand. Then he summoned everyone and announced loudly, "I want to tell you some good news. We The design is complete!”

"Whoops!"

The hall suddenly became hot, everyone was clapping excitedly, and everyone became very excited.

This is the design of a spaceship!

They participated in the entire design process, and it was finally completed on this day. They also felt that it was not easy. It was precisely because it was not easy that they were even more excited.

Zhao Yi said some words of encouragement, then announced a holiday for some employees, and then returned home tired.

He needed a break too.

After Zhao Yi left, many people suddenly felt that something was wrong.

They were excited just now because they had completed the design, but when they thought about it more carefully, they found that there was nothing difficult about the work.

Before coming to work in the design team, they expected that the design would last one, two, or even longer, but it ended up being completed in two or three months?

What's not easy about this?

so easy!

Everyone started discussing, "It seems that the design of a spaceship is not so difficult?"

"It's done so quickly!"

“It feels simpler than airplane design.”

"You all thought wrong." Lei Yong stood up and said, "Now we are simple because most of the work is done by Academician Zhao. If there are any problems in the design, Academician Zhao will point it out directly. If it were another person, Do you want to try it? I guess it hasn’t even started yet.”

The others thought about it carefully and nodded vigorously.

yes!

Let alone designing a complex spacecraft, even if it is an ordinary aircraft or ship design, a few months is simply not enough.

They all exclaimed, "Academician Zhao, this is so amazing! This is so amazing!"

"Sure enough, following Academician Zhao is different. It's very efficient!"

“Fortunately I applied!”

"..."