Global Disaster: I Have Countless Black Technologies

Boom!~Boom!~

The work indicator lights up, and the automatic metal furnace starts immediately and starts running at full power.

A blue flame with a temperature of more than 5,000 degrees rises from the furnace, completely melting the metal raw materials transported at the material inlet.

Then, based on the data from the superconductive alloy formulation, the forging hammer begins to be fused in a certain proportion.

It ends up being injected into a huge mold.

About five minutes later.

The first piece of the gun angle ramming weapon part cast from a super conductive alloy was produced from the furnace.

Because of the extremely huge (tens of meters long) relationship between the long-gun angle collision weapon deduced and designed by Jarvis, it is impossible for the automated metal furnace to build it as a whole.

In other words, it cannot be transported to the outside of the submarine-type mobile ocean refuge~.

Therefore, Li Hao adopts the batch casting-manufacturing method.

The long-gun angled weapon is divided into different parts and produced.

Finally, when the front armor of the submarine-type mobile marine shelter is installed, it is spliced and melted.

Of course, as a component of a "melee weapon" tens of meters long.

Even just a part of it is quite huge.

Take the tip of the spearhead-like part in front of Li Hao, its length is also more than 1 meter 5, and its shape looks like a huge lightning rod with a strange shape.

And that's just one of nearly 100 split parts.

"According to the current manufacturing schedule, even if there is a sufficient supply of metal raw materials, it will take at least five days to really manufacture a long-gun angle weapon with only an automated metal furnace with a daily production capacity of five tons."

Estimating the manufacturing schedule, Li Hao frowned slightly.

Too slow.

With the development of the shelter, he also felt more and more that the output of automated metal furnaces could not keep up.

"It seems that the matter of increasing alloy production also needs to be put on the agenda."

Li Hao thought thoughtfully.

He was ready to solve this problem by purchasing drawings of metal fabrication equipment directly.

After all, the capacity of automated metal furnaces cannot keep up with the development of shelters, and the impact on the development of the shelter is too great.

With the rapid development of the shelter and the development of the construction of the submarine base, the problem that the alloy production capacity cannot keep up will definitely become more and more serious in the future.

If you don't buy it now, you will still buy it later.

In that case, it is better to buy it early, solve this problem early, and make the development of the shelter faster and smoother.

Thinking of this, Li Hao opened the system mall again and began to screen the drawings of scientific and technological equipment for synthetic metals.

Metal atom synthesis furnace, quark-level metal fabrication instrument, stellar metal manufacturing furnace

Ignoring these high-end metal synthesis equipment drawings that he simply cannot afford, Li Hao turned his attention to those metal fabrication equipment drawings that cost about 30,000 points.

Metal synthesis machine tools, automated metal furnaces, alloy printers...

After some comparison, Li Hao finally set his sights on the automated metal furnace equipment.

He has used this equipment for so long, and naturally he knows it very well.

Among the many metal manufacturing equipment that can be purchased with 20,000 points, the performance parameters of the automated metal melting furnace are not the best and most prominent, but they are comprehensive and optimal.

While most alloys can be manufactured, the manufacturing speed is not slow.

Applicability is very comprehensive.

"Just buy this."

After a moment of silence, Li Hao bought it without hesitation.

-29800.

In an instant, Li Hao's point balance shrank to just over 10,000.

"Points are really getting less and less used."

Seeing this, Li Hao couldn't help but sigh a little.

In just half a day, he used nearly 40,000 points.

It's a lot of water.

Of course, these point payouts are all necessary.

Therefore, after Li Hao sighed, he did not bother much on this.

There are no points, just continue to "earn".

Walk to the super 3D printer bed.

Li Hao enters the automated metal furnace drawings into the machine's drawing library.

After the input is successful, Li Hao directly clicks Manufacturing, and the quantity is set to 5.

He is ready to increase the shelter's alloy production to 30 tons per day in one go.

Such a high alloy yield is enough to meet the needs of the shelter for a long time to come.

Multiply! Multiply! Multiply!

As Li Hao presses the manufacturing option button, the super 3D printer bed also starts.

Machine tool track turning.

One by one, the silver robotic arms were flipped up and down, based on metal raw materials, and began to print into precision mechanical parts.

Subsequently, it is assembled and combined.

About fifteen minutes later.

The first automated metal furnace came off the machine.

Open the panel of this automated metal furnace.

......... Ask for flowers...

【Automated Metal Furnace】

[Currently has alloy formula]: None

[Current output]: 5 tons/day

【Introduction】: Industrial technology creation, can automatically melt and synthesize most metals.

"Except for the blank library of alloy formulas, everything else is exactly the same."

Determining the performance of the automated metal melting furnace manufactured by the super 3D printer is no different from the system reward, Li Hao is also relieved.

Let the fully automatic multi-functional mechanical building octopus move this automated metal furnace next to the original automated metal furnace.

"Jarvis, copy and share the alloy recipe database of the original automated metal furnace into this new machine."

Li Hao spoke.

Two seconds later.

Jarvis: "Sharing completed!"

Open the new automated furnace properties panel again.

After confirming that the alloy recipe library of the new machine was no different from the old one, Li Li also began to use the new machine to make parts for the gun angle weapon.

In an instant, the old and new machines started together, and the efficiency doubled in an instant.

The manufacturing speed is suddenly much faster.

"There are still four automated metal furnaces that have not yet been manufactured."

"Once all of them are built, six automated metal furnaces will start working together, and the speed of making long-gun angle weapons can be six times faster than before."

"In this way, the original manufacturing time of more than five days can be shortened to less than one day..."

Thinking of this, Li Hao also showed a satisfied smile on his face.

Waited another hour.

The remaining 4 unfinished automated metal furnaces have also been manufactured.

Follow the previous operation to share the alloy recipe database.

Jarvis was then assigned the task of making his own long-gun angled weapon.

With six automated metal furnaces operating at full capacity, the manufacture of long-gun angle-percussing weapons was instantly on the fast track.

It is quickly manufactured at a speed visible to the naked eye.

Seeing this, Li Hao also nodded with satisfaction.

Then you just have to wait.

Almost at night, the long-gun angle-impacting weapon, which he had envisioned and designed by Jarvis, would be ready.

After doing all this, Li Hao, who has nothing to do for the time being, also plans to relax.

Play games with Zhao Xueshi and pass the time.