Good luck! This village is full of billionaires

Rainbow TV.

Inside a large studio.

The host, Susan, was curious: "Village Chief Fang, can you tell us more about the lithography factory?"

At this moment, Susan couldn't help but be curious.

Netizens in major cities across the country are very curious.

After Rainbow Satellite TV was launched, the ratings crushed the whole country and became people's favorite TV station.

This special program.

There are tens of millions of viewers who are watching.

Through previous popular science.

The audience already knows how important chips and high-end lithography machines are.

Right now......

The new idea of the lithography factory proposed by the village chief Fang Yun undoubtedly made many people's eyes shine.

on the screen.

Fang Yun said slowly: "The plan of the lithography factory, that is, SSMB, has always been one of the four routes of lithography technology, and Western countries have long put forward it.

Because this plan requires the country to have a high degree of scale and concentration of industrial chains, Western countries have not adopted this plan.

And Xia Guo has the conditions for the successful implementation of this program.

The lithography factory is a mechanism that can unleash its own potential.

For example, if you need 100 lithography machines, it makes sense to build a lithography factory.

But if only one lithography machine is needed, then building a lithography factory is equivalent to wasting 99% of the production capacity, and the cost of chips will be difficult to reduce.

In the same way, if the chips produced by these 100 lithography machines will be sold to the domestic market, that is, free trade, then there will be no problem in setting up a lithography factory. 843

But if your chip customers are foreign companies, then frequent waste of capacity will lead to rising costs, thus forming a buyer's market, and foreign customers will deprive you of profits.

Ingeniously, more than 60% of the world's chips are purchased by Xia Guo enterprises.

This also makes it possible for only Xia to have the ability to establish a lithography factory and achieve true free trade.

Therefore, for Xia Guo, chips are a product with huge added value.

A 20 yuan chip is not only related to the cost of the chip, but also determines whether a car worth 10,000 yuan is competitive in the market.

These are special conditions that other countries do not have.

Other countries have never considered this route, and their negative propaganda has focused mainly on the difficulty of the lithography machine. "

"I see!"

Susan nodded in realization.

Fang Yun continued: "Asmail in the Netherlands, the parts are inherited in a cabinet, because they sell goods, sell to the world, all must realize the miniaturization of lithography machines.

And we can diverge our thinking and directly build a large workshop, and a large laser accelerator will be installed in the workshop.

The tube is circular or straight.

Anyway, the place is.

As long as it is large enough, it can produce a light source with enough power or even more (CDEG).

This is equivalent to the difference between a printer and a printing house.

What we want is a chip, from scratch.

It doesn't matter if it's made from a box or a factory.

If you can't break through the miniaturization of light sources, so what?

Anyway, Xia Guo has no demand for high-end chips to be exported, so it will be according to the way of the factory.

Who said lithography machines have to look like them?

This is the difference between scientific thinking and engineering thinking.

And it is precisely in the past few decades that we have developed rapidly, and the best thing is to engage in engineering!"

Hear here.

The audience in front of the TV understands it.

Since Xia Guo can't do integrated miniaturization, then do it normally, and if it doesn't work, it will be bigger!

If the parts can't be squeezed, they will be tiled.

Asmael of the Netherlands has a big cabinet, and we will pull an assembly line.

It's like a CNC machine.

When we didn't, that's how we made it?

Lathes, milling machines, planers, grinders, a set down, the same can be up to standard.

He is a CNC machine.

We can also do it in a workshop.

The lithography machine factory mentioned by Village Chief Fang Yun, that is, the lithography assembly line, needs a super large workshop, so how much does the place need?

If we can't build a water heater, let's build a boiler room.

If we can't get a treadmill, let's build a stadium.

The principle is actually the same!

At this time, Fang Yun said: "At present, Rainbow University has funded the construction of a steady-state micro-gathering beam (SSMB) extreme ultraviolet light source facility in the West Coast New Area.

The SSMB light source will be made into a large ring, and the traditional impression of the lithography machine will be made into a lithography factory.

The facility uses a 1,064-meter-long laser to control the electron beam in the storage ring MLS in Berlin, causing the electron beam to run around the ring in a circle with a circumference of 48 meters, forming a fine microstructure, known as micro-beaming.

Micro-clustering emits high-intensity, narrow-bandwidth coherent light at the laser wavelength and its higher harmonics, and the formation of micro-clustering is verified by detecting this radiation.

As a new generation of accelerator light source, steady-state microbunching and SSMB can produce high-power, high-repetition coherent light, and the wavelength can cover the terahertz to extreme ultraviolet bands, proposing a new chip manufacturing method, subverting the limitations of traditional lithography technology, and is an innovative technology for future chip manufacturing technology. (If you read a violent novel, go to Feilu Novel Network!)

The light source generated by it, through continuous screening, can obtain 5nm, 4nm, 3nm, 2nm, and 1nm beams of different specifications, and then dock with lithography machines of different specifications.

In this way, we can produce chips in different processes from 5nm to 1nm.

ASML's EUV engraving machine is equivalent to using extreme ultraviolet light with a wavelength of only 1/10,000th of a human hair diameter to engrave circuits on wafers, and tens of billions of transistors can be made on chips the size of fingernails.

Our lithography factory, a steady-state high-power light source, can accelerate electrons to close to the speed of light, and produce a light source with short wavelength and high power to improve the chip manufacturing process, which can be said to be a new manufacturing process.

Once the lithography factory is officially built.

Gone are the days when ASML single-handedly covered the sky in the Netherlands.

As the only country with a whole industry chain in the world, the chips produced by the lithography factory can be used and exported for their own use.

Of course, before the lithography plant was built.

Rainbow Semiconductor Group will also study lithography machines in the traditional way.

The two go hand in hand.

We have reason to expect that the field of lithography machine in Xia Guo will usher in a new breakthrough!"

The voice fell.

Susan nodded heavily.

Whether it is a lithography factory or a lithography machine, it is also good.

She believes that Xia Guo will eventually have high-end chips!

......

After the show aired.

One pass ten, ten spread hundreds.

The "lithography factory" proposed by Village Chief Fang Yun instantly appeared on the hot search of the whole network.

After netizens understood the significance of the lithography factory, everyone was shocked. []

In the hot search comment area.

Countless people are talking about it.

"Damn?!lithography factory?!"

"Oh my God! Village Chief Fang's thinking is amazing!"

"Great! After building a lithography factory, we will have a cutting-edge lithography machine!"

"It's incredible, didn't I expect the lithography machine to be born in the form of a lithography factory!"

"Haha, if we can't build a treadmill, let's build a stadium! Fang Shoufu's idea is too ingenious!"

"Lithography factory is a new scientific research idea, we can try, who may be able to achieve corner overtaking in the future!"

"That's right, it's always right to try, if the lithography factory can really be successfully developed, it will undoubtedly subvert the entire high-end chip industry!".