Grandpa traveled through the Republic of China, and I shocked the world!

"Damn it, how did you untie it?"

Zhang Yuan said in horror. After saying that, he saw the black muzzle of the gun again. He quickly knelt down on his knees, kowtowed and begged for mercy.

"Brother Zhao, this is all a misunderstanding. Don't kill me. Mamnu forced me. I owe them a lot of money. If I don't do this, they will kill me."

Zhao Dezhu didn't care what he said. He tied him to a pillar with a rope and picked up the whip on the ground...

Three hours later, he took Zhang Yuan's unrecognizable body, together with the tattooed man, who was Ma Munu buried all the corpses of his men and went to his lair to find more than 10,000 US dollars.

"With just this little money, why do you have the nerve to run out and become a gangster?" Zhao Dezhu spat in disgust.

After returning to the hotel, he did not stay longer, packed his things and immediately changed to a hotel far away.

Zhao Dezhu was not sure whether Do Mnu and others have any accomplices? Do you know that they are going to kidnap me?

Now that Mamnu and others have disappeared, but he is back, it is likely to cause other troubles. It is safer to change places.

Put down your things, He changed his clothes, fully equipped with sunglasses, a hood, and a mask, and went to the weapons market again.

After returning home, for safety reasons, he would definitely not be able to come back in a short time, so he had to prepare some supplies for his grandfather.

He did not go to the weapons market before Instead, I went to Lao Laman’s shop that I had heard about in the past few days.

Lao Laman’s family is quite famous in the local area. Everyone said that his family is: There is a 7-year-old yellow-haired boy who repairs heavy trucks. There is an 80-year-old man rubbing Akka.

It is both a mockery of their profession and a compliment to their craftsmanship.

Laman Raman is 81 years old this year. He started rubbing Akka when he was 19 and is now one of the best in Peshawar. A master craftsman, his grandson also inherited his dexterous hands, but he had no interest in firearms and focused on repairing heavy trucks.

Walking into an ordinary store, a middle-aged man in his forties came up and said with a smile :"KiyaHalHain. Zhao

Dezhu knew that this meant"Hello" in Urdu and replied"Hello" in Chinese.

The man looked surprised and said in very skilled Chinese:"It turns out that I am a friend from China. Welcome. Inside please! and warmly invited him into the store:"My name is Karim, what do you call me little brother?""

I didn't expect that the other party's Chinese was so fluent, which made him a little stunned. He replied blankly:"Well, my name is Zhao Dezhu."

"Zhao, what do you need? Oh, don’t worry, let’s take you to visit our processing factory first!"As he said that, he pulled Zhao Dezhu to the backyard.

The backyard was not small and was divided into multiple areas. More than a dozen people were busy.

Kalam took him to the work area on the far left and picked up a 30-year-old A steel block of about centimeters, he explained enthusiastically,

"This is high-quality alloy steel, which is used to make the gun body. As you know, most Aka on the market use stamped steel sheets, which are not of good quality. This one is of great quality!"

Looking at the thumbs up, the three words"bangbang" are still lingering in my ears, which makes people feel like they are back in China.

Kalam is still introducing eloquently:"This is cutting. area, use a machine tool to cut out the blank material, and then perform secondary processing, and finally get such a gun box."

Zhao Dezhu looked at the solid steel block just now. The inside was basically hollowed out, leaving only about 4 millimeters of shell. He sighed in his heart: Three quarters are gone, what a waste. Of course

Kalam didn't know what he was thinking. What, drag him to continue visiting,

"Do these iron rods look like steel bars? In fact, it is just steel bars, but only the front part and the back part are welded using high-quality seamless steel pipes."

Then he took him to a simple machine and saw that the entire machine was just a concave frame with four drill bits across the middle.

After Kalam fixed the steel bars, he started the drill, and then took him to see another machine,

"The one in front is for drilling gun barrels. This machine is for rifling. It can make six barrels at the same time, which is very efficient!"

Zhao Dezhu looked at it for a while and found that the speed was really not fast. It took him only one minute to drill in one centimeter. Before he could complain, he was pulled to the lathe again.

"After the internal processing is completed, it means processing the outside, cutting it to the appropriate size, drilling the air guide hole, and the barrel is initially completed."

At this time, the general shape of the gun barrel can already be seen. Next to it is the entire barrel with the barrel, class ring, magazine latch, aim and gas tube seat installed.

He picked up a After looking at the shiny barrel carefully, he couldn't help but admire:"What a good craftsmanship, it feels very solid! Kalam smiled and said:"Haha, of course, there will be no problem if you fire 10,000 rounds of bullets.""

Then it was the veteran technicians' turn to assemble the firearms. They had to inspect them while assembling. If the processing was not precise, they would need to use files, saws and other tools to make adjustments based on their rich experience. After that, they would have to assemble the firearms. All the good guns are dismantled, and the metal parts are placed in a bathtub-like iron basin for potion boiling. The iron pot is filled with a high-temperature blackening agent. After the parts have been cooked for 20-30 minutes, take them out and put them into a container. Rinse it in a stainless steel bucket with hydrochloric acid dissolving agent, take it out and clean it with clean water.

After some treatment, the originally shiny silver metal parts have turned black, and an antioxidant film has been attached to the surface. Not only can Anti-corrosion and rust-proof, the appearance is also more beautiful.

Finally, these parts are returned to the hands of the master technician for secondary assembly. As for the engraving of serial numbers and serial numbers, which are not technically difficult tasks, they are all completed by apprentices.

Zhao Dezhu also I had seen a video of Lao Ba rubbing his Aka with his hands, but after watching the whole process with his own eyes, I was still shocked. He gave Kalam a thumbs up, and the other party picked up the newly rubbed Aka and three full The bullet magazine, smiled and said:"Zhao, do you want to try the gun?"

PS: Thank you readers for your flowers and support. Beer will repay you with serious code and give 18911 a big reward!