Great Creator

Chapter 209 Design Room (2/2)

Chapter 209 Design Room (22)

In fact, in addition to this simple menu, there are many numbers floating in this space.

For example, there is a line of small words at the top of the menu:

Design room: level1, exp: 0/10

There's even a number to the right of that craftable menu: 2/2.

And in the space around him, there are some numbers floating in the air, which mark the current boundary and scope of the design studio. It seems that this white space is not entirely within the scope of the design studio, and the surrounding area should be counted as the book of creation The interior space, and the design room is only one part of it.

This is the effect of quantitative eye.

The Quantitative Eye skill can't display anything that Huang Si can't understand. What it shows must be something that Huang Si can detect through careful observation and research, such as molecular diameters and so on.

Taking the current level and experience of the design room as an example, through the memory thrown to Huang Si by the book of creation, he can vaguely feel that the design room can be upgraded, and there may be new menu items in the future.

As for the 2/2 that can be crafted, it obviously means that only these two things can be crafted, and there are no other uncraftable items.

Let's see what we can do?

Huang Si clicked on the automatic manufacturing lathe, and a reminder automatically popped up in the air.

Automatic manufacturing lathe:

The design room can be made automatically, greatly reducing the burden on the creator. It is recommended to make priority.

Law Requirements: None

Drawing Requirements: None

Material Needs: The Power of Creation

No wonder it can be manufactured directly, and the requirements are really simple.

Look at another thing.

Automatic plotter:

It can automatically retrieve the illustration book, automatically read the knowledge system owned by the creator, and measure the success rate of drawing drawings, automatically draw drawings, and check the validity of drawings.

The following requirements are exactly the same as the lathe.

That "recommendation" was indeed reasonable. The automatic lathe could be made automatically and reduce the burden. It seemed to be a good thing for a lazy person like him.

The designer of the Book of Creation was very interested in him. Although he didn't know who it was, Huang Sisi gave him a thumbs up.

The next step is simple. Huang Si pressed his hand on the line "automatically manufacture lathes", and then a translucent phantom of a lathe appeared in the space around him, and a dialog box appeared near his fingers:

Whether to manufacture: OK/Cancel.

The moment Huang Si clicked on the OK button, the diagram of the entire automatic manufacturing lathe was automatically unfolded in his mind, and its complexity almost completely deprived him of all his thinking ability.

Fortunately, Huang Si has become accustomed to working under high pressure after experiencing the incident where the core of the world used the world projection to stuff consciousness.

Huang Si looked at the diagram of the lathe displayed in his mind, and found that he only needed to use the power of creativity to generate each part one by one as shown in the diagram, and some connected parts in the middle were also generated according to the diagram. The properties and materials of the components are explained in detail, and even the functions and principles of each component are explained.

It is worthy of being the first recommended production equipment for novices, and even the diagrams have such a complete guide. Huang Si admired the predecessors of the Master of Creation system, so he planned to try it out first.

The power of creation was derived from his soul, through physical contact, poured into the space inside the book of creation, and then entered the design room.

An illusory shadow looms in the design room.

This project is extremely complicated, and Huang Si spent almost 99% of his attention on making the lathe, leaving only a little attention for daily needs.

Countless complex patterns passed through his consciousness, and then the power of creation was condensed bit by bit according to the diagram. The pattern on the lathe becomes clear like weaving cloth. During this process, he also wrote down the relevant knowledge about the functions and operations of the various components inside the lathe.

And so the day passed.

Huang Si completely exhausted his creativity for the first time since having the help of artificial intelligences. He went to sleep, and when he woke up, his reserve of creative power was almost full again.

After tidying up and getting up, Huang Si sat in the living room with a disheveled face, waiting for dinner.

Mo Xia made him breakfast, and seeing that he was not in good condition, he asked worriedly, "Father God is not feeling well?"

"No, it's okay. If you want to make a metaphor, you can think about the feelings of students who have just taken the college entrance examination."

Huang Si just consumed too much brainpower and soul, and it was a bit overwhelming.

After eating breakfast and relaxing for a while, he devoted himself to the manufacture of the lathe again.

After all, this thing sounds like a thing that can hang up automatically, and making this is the real sharpening of the knife and woodcutter.

Ten days later, Huang Si was finally freed from the nightmare of making a lathe. During these eleven days, his soul has been operating at full capacity almost all the time, and now he only feels extremely tired.

But there are also benefits.

The experience of making lathes brought him relevant knowledge about machinery and design. In the consciousness space, the law on the earth side has changed. Now the machinery has changed from 21.93% to 22.47%. He can even vaguely sense that there is a " In the field of law of "design", the estimated value is only less than 1%, so even the data cannot be displayed.

This kind of experience of manually making equipment is not bad. Although it is tedious and tiring, I can learn something.

After the lathe is formally formed, it is a square table with dense patterns on the surface. If you look closely, you will find that it is not a pattern, but some etched channels, just like a circuit board. The edge of the lathe is densely covered with 1*10e8 production interfaces, which can be used for multi-thread production. The interior of the lathe is the core of automation, which can automatically absorb the power of creation and automatically generate items according to the drawings.

After the lathe is built, the experience of the design room becomes: level 1: 1/10.

The lathe is so large that it takes up part of the book.

Huang Si probed this thing with his consciousness and found that its functions were extremely complicated and difficult to explain in a scientific way.

It was originally mentioned in the memory given by the Book of Creation that the composition of the items made by the design room is equivalent to divine artifacts, but they are generally the lowest level of divine artifacts and cannot reach the level of creation artifacts.

Previously, Huang Si poked the "Design" button, only to find that the interface only gave him a blank sheet of paper on which he could draw drawings with his mind. He tried to draw it, but because of his thoughts, he accidentally drew a loli with cat ears.

It's fine if the painting looks good, the key point is that he has no artistic talent, the cat-eared loli he drew doesn't look like a loli at all, just like a hairy monster.

Unconvinced, he painted a few more times, but each time got worse. People who have no talent for drawing are so scary.

With a sullen face, Huang Si clicked the clear button in the design menu to delete his graffiti, forgetting about this dark history.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like