Hardcore crisis

"Sonny, get ready, I want to go down and take a look."

"Sir, please don't make such a risky move." Sonny dissuaded Lu Yuan when he heard that he was going to check it out in person.

"fine."

Lu Yuan waved his hand and said thoughtfully: "Since there is such an abnormality in the USB flash drive, I have to take a look and be fully prepared."

When he spoke to such an extent, it was obvious that Sonny could not stop him, so Sonny had no choice but to issue instructions to prepare.

"By the way, have you finished what I asked you to do before I left?"

Lu Yuan asked after remembering something.

"The trial model has been completed, do you want to take a look?"

"Well, let's take a look first."

If Area A is the material storage, mechanical processing, and production area, then Area B on the second floor is a comprehensive large-scale area integrating living, rest, food, storage, medical care, and laboratories.

Area B-211 has 245 independent divided spaces, which can accommodate nearly 1,500 regular personnel to live, rest and eat.

Area B-222 has more advanced medical facilities in the future, which can automatically handle most surgical operations and the treatment of many diseases.

Area B-233, a residence for senior personnel, can accommodate 565 people in a high-standard space.

Area B-244, the experimental area, can carry out a variety of biological and medical research and development work.

Area B-255 is the storage location for a very large collective quantum host. In times of crisis, it has the ability to operate independently with a separate power source for 12 hours.

Area B-265, a testing site for mechanical improvements and experimental products.

Area B-275, equipment storage and weapons preservation area.

Area B-285, biological DNA and seed sample bank.

Each divided sub-area here is equipped with an independent access control system. The thick steel door provides an airtight seal to prevent the intrusion of chemicals, biology, toxic gases, and nuclear radiation. Even if there is a problem in one sub-area, it will not affect the other sub-areas, making it foolproof.

Coming to area B-265, NS-5, a robot that has been temporarily converted to automatic maintenance and processing, can be seen everywhere. They are based on the original humanoid shape, with six Belxis multi-purpose mechanical tentacles installed on the back. The exquisite tentacles can comprehensively transport 36 types of contact pins of different sizes, and can easily pick up the smallest thin needles, and can achieve 100% accuracy. Thread the thin wire through the needle hole in 0.001 seconds.

The entire South Pacific submarine underground base is indisputably owned by Lu Yuan in principle and law, for future needs and novelty toys. He formulated many "novel toys" for development.

One of them is exoskeleton armor.

In the world of mechanical enemies, most of the human military uses military robots, but this does not mean that there are no human uses. In some application scenarios that are not suitable for robots, exoskeletons emerge spontaneously. Especially after more than ten years of development, exoskeleton armor is not only used in outer space scenarios. It is also suitable for many complex mixed environments such as engineering development, harsh environments, and exploration and tourism.

With this prerequisite, it is impossible for Lu Yuan to ignore exoskeleton armor.

NS-5 is indeed a very versatile robot that can be used in various environments, but it can only be used quietly without being known to the outside world. It is not suitable to take it outside, the performance of NS-5 is simply too appalling. But exoskeleton armor is different. As long as the specifications are appropriately reduced, the difficulty of acceptance will be greatly reduced, and it will not be too ostentatious.

How to reduce the specifications is very simple. It is rare to use exoskeleton armor for industrial purposes for military purposes. It will definitely need to be modified in several aspects.

Now Lu Yuan has left this to Sonny. According to his request, three prototypes will be made for Lu Yuan to make the final decision.

All sub-areas are divided according to different levels and importance, from low-level Safe (safety) to Hram (harm), Danger (threat), Catastrophe (disaster), and finally Perdition.

Area B-265 belongs to Class D, and the security inspection and access control system are extremely strict. Even the owner of the base, Lu Yuan, must undergo DNA and iris verification. Under the double verification of gait analysis and skin texture, he can walk through the passage and arrive at the location. Area B-265.

"Woooo..."

The alloy door opens under the operation of the hydraulic system, exposing the space inside.

This is a quite large space. Lu Yuan took a few steps forward and was standing on a platform that stretched out. Below him was a large space that was nearly fifty meters wide and more than two hundred meters long.

Although the space is large, it is not empty. On the contrary, it is filled with instruments and equipment from another world, and there are even several fully automated 3D printers. Different from conventional cumulative manufacturing technology, The 3D printer here mainly uses collective nanorobots. After inputting digital model data, the collective nanorobots can quickly process and transform special metal materials and plastic materials with an accuracy of up to 10nm.

With these 3D printers, as long as Lu Yuan obtains EDI's maintenance procedure manual, he can perform maintenance measures on his own in the future without having to worry about parts failure and scrapping due to failure to maintain after multiple flights.

Of course, the greater purpose of the several 3D printers here is for the experimental manufacturing and production of various equipment and weapons.

Walking down the stairs next to him, Lu Yuan followed Sonny, one person and one machine, and stopped in the semi-circular display area. Here, three exoskeleton armors that have been produced are quietly placed on metal supports, waiting for the new owner to come and inspect them.

Different from the powered exoskeletons currently being developed by the outside world, the exoskeleton armor itself is fully enclosed, just like airtight armor. This is different from the Hybrid Assistive Limb (human auxiliary prosthetic limb), which is commonly known as the enhanced wearable power exoskeleton. Machines, the gap is quite big.

The powered exoskeleton itself is limited by technical conditions. DARPA's requirements are only to enhance the power of soldiers, so that they can run faster and further and carry more supplies. However, there are currently no plans to equip the powered exoskeleton with defensive capabilities.

The exoskeleton armor produced here is based on a space engineering machine from another world. It is 2.5 meters tall, fully enclosed and welded, has thousands of sensors, is equipped with an independent survival system, and is equipped with gas circulation processing and emergency medical treatment. , a variety of multi-purpose integrated aircraft with short-term defense capabilities, code-named Silvertip-1 (Grizzly Bear).

The second machine body is much smaller. It is basically made based on Lu Yuan's body shape. It is 1.85 meters tall, has thinner and more fitting armor, and more muscle pressure sensors and electromyography sensors. Compared with " "Grizzly Bear" is too flexible in terms of speed and agility. However, due to its size, the exoskeleton armor code-named Foxhunts-1 (Foxhunts) naturally does not have a breathing and circulation device, nor does it have an emergency medical treatment system. Even its defensive capabilities are not very strong. Of course, this lack of strength is relative. As far as "Grizzly Bear" is concerned, based on the materials used in "Hunter Fox", even close-range rifle fire is almost ineffective. Only anti-material sniper rifles can break through its armor.

The third body, strictly speaking, does not belong to exoskeleton armor, but should fall into the category of powered exoskeletons. It is the first generation of HAL-1 human auxiliary prostheses developed at Lu Yuan's request, but it is still different from external powered exoskeletons. Big difference.

Based on defense-based thinking, although HAL-1 does not have a large area of ​​armor to cover the human body, it uses a bulletproof vest made of carbon nanotubes on the chest instead, and cooperates with an AR monocular device to assist in operation calculations.

Compared with the "Grizzly Bear" and "Fox Hunter", which were slightly modified from the original aircraft and already had a mature design, Lu Yuan was not worried. He focused more on HAL-1, which could take to equipment used by the outside world. (To be continued ~^~)

PS: Please give me some rewards, please count your votes...