Heavy Truck Chariot In The End Times

The huge movement of the dual-core totem mutual cutting device made Shen Cong unavoidably frightened, afraid that it would explode if it was not working at such a high speed.

The active stormy waves raging outside are also many times stronger than strong storms.

Even if the dual-core totem mutual cutting device is not used for engine research, the storm that is larger than the golden totem is enough to be included in the history of his personal research and invention.

Three minutes later, Shen Cong separated the two totems, and the big scene gradually subsided.

After checking, they found that the totem of the Bull Demon King had not changed much, but the surface of the totem of the Boar King had already produced slight cracks.

"In the case of high-speed operation, the resonance field is distorted, and the active core of the wild boar king's fangs cannot hold up this distortion." Shen Cong quickly guessed the reason. The low-quality active core was still a little worse.

It also shows that this dual-core totem cross-cutting device has a very large loss of the active core, which is much greater than the loss of the dual-core active resonance field.

This loss is understandable, after all, it has set off a more powerful active storm.

It is impossible to have two low-level totems, and without any consumption, they can burst out more powerful effects than high-level totems at once.

Despite the loss, Shen Cong was still pleasantly surprised.

Facts have proved that although the cutting resonance field cannot generate electric current, the resonance field can be twisted with each other and produce a huge repulsion force. By relying on this repulsion force, another device that generates kinetic energy can be made.

As long as it can generate kinetic energy, it means that whether it is power generation or engine, there are prerequisites that can be achieved.

And the most important thing is that this kind of device is based on the use of activity, and its own consumption is not large.

There is a folk style of perpetual motion.

Of course, it is not completely consumption-free work. Ordinary totems will produce two types of power consumption-one is active guided injection to maintain the stability of the resonance field; the other is the loss of the active core itself, which will accelerate the use of the active core life.

Bringing a dual-core totem cross-cutting device is the same for the two types of consumption, and in order to maintain the stability of the two totems, the active consumption is greatly increased, and the active core life is further reduced.

Just like the fangs of the two wild boar kings, it can take at least three months to make a totem, but it takes only a few minutes to make a dual-core mutual cut, and it has already cracked and is on the verge of destruction.

"So, to use the mutual cutting device, a large number of high-quality active cores are required."

"I can afford this consumption."

Shen Cong in an era, now that his hair, nails, and teeth are about to grow, he has not had time to check his own state, but at least it is several times stronger than before entering the Lv1 era.

With strong strength, hunting powerful golden beasts is not too difficult. High-quality active cores can be continuously supplied.

The active core can be guaranteed, and the big Vajra does not take much effort to maintain the totem.

In other words, you can continue to develop how to make the dual-core totem mutual cutting device convert the work done into usable kinetic energy.

Shen Cong took out the paper and wrote and drew on it: "Guide resonance, cut each other, get around repulsive force, inject activity, maintain operation, generate storm, rotate at high speed, absorb activity... If you fix one end, fix one of the totems, and the other If the totem is equipped with gears, does it mean that only the totem with gears will rotate and double acceleration?"

"From previous experiments, it can be seen that the field between the two totems has mutual repulsion in the field, driving the totem itself to rotate. This repulsive force, the closer it is, the more obvious... One fixed as the rotor, and the other as the stator. , This kind of interaction can act as an engine!"

...

In Shen Cong's mind, the brand-new dual-core totem mutual cutting device became clearer and clearer.

Quickly picked up the pen, drew a brand new design drawing on the paper, and wrote the five words "totem engine" in the upper left corner of the drawing.

The totem engine relies on two totems to work together-the rotor totem and the stator totem.

The rotor totem is a base disk with two active cores symmetrically inserted on the left and right sides, with a smaller diameter. At the same time, a middle shaft is used to connect with the rotating gear outside the engine as a way of kinetic energy output.

The rotor totem can rotate, but the chassis is fixed, and it cannot move left and right, and can only drive the central axis to rotate.

The stator totem is a disk with a larger diameter, with two symmetrical active cores inserted. The stator totem has no central axis, it is fixed and cannot be rotated. However, the whole body can be extended and contracted. When it is pulled up, the stator totem is separated from the rotor totem, and when it is pressed down, the stator totem covers the rotor totem.

When the totem starts to work, the rotor totem rotates at high speed, driving the gears of the central shaft, and outputting external workmanship.

The stator totem relies on the degree of expansion and contraction to complete the gear work of acceleration and deceleration.

In this way, a perfect totem engine is manufactured!

"call!"

Putting down the pen and picking up the drawing, Shen Cong exhaled a long breath. He felt that this design scheme was reasonable and effectively solved the problem of engine speed adjustment.

If the speed cannot be adjusted, the engine cannot be used directly-how do old drivers still drive.

The totem engine has been formed on paper. The next step is to continue to experiment, take all aspects into consideration, and assemble a simplest totem engine for calibration.

After everything is in order, the engine of the big Vajra can be modified and the Totem engine can be installed.

...

Before you know it, the sky is already dark.

Shen Cong spent a whole day in the experiment, especially all his energy was devoted to the totem engine.

Finally in the evening, the first experimental totem engine was manufactured by him. The experimental machine is placed on the aisle inside the carriage. It has a somewhat large body, mainly because the active core used is also relatively large.

Electronically regulated shifting.

A generator is connected to the rotating shaft and an electric light bulb is installed.

"Eat first, dispose of other experiments, and immediately experiment with the effects of the totem engine."

Shen Cong still has three groups of experiments. The first group is the banyan yogurt feeding experiment of the honey bee, and the results have not been observed for the time being; the second group is his own banyan yogurt stimulation experiment on bone development. After drinking yogurt, the signs of teeth, nails, and hair growth were not obvious.

The third group is a mixed feeding experiment of blackhead live pearls and banyan yogurt. The activity of blackheads has increased again, but the body changes have not been observed yet.

Recording the experimental data, Shen Cong soaked in the flower room for another half an hour. His peach tree had already grown, and there were more than a dozen immature active peaches hanging.

The lotus seeds have been harvested, and the potatoes have begun to sprout.

It is a pity that no new source of nectar has been discovered for the time being, and the supply of Honey Bee Bee’s Honey Bee has been discontinued, and the supply to him has also been reduced. In particular, Royal Jelly is only enough for the queen bee.

"We need to find new flowers. The climate has been reversed near the oasis, and there should be no distinction between winter and summer. It should be possible to find a source of nectar nearby."

After leaving the flowering room, I went to the ant nest for a few minutes. The ant eggs laid by Ant Lishen are now huge, and the first huge ant egg is about to hatch.

The Vajra ant colony develops rapidly.

After doing all this, Shen Cong rested for five minutes and began to continue his research on the totem engine.

Thank you for reading this story at mtlarchive.com. Your support enables us to keep the site running!