I Found an Apocalyptic World

Regarding the smearing of China, some foreign media are really black and black, and don't care about the authenticity of the news.

What they need is hot spots, what they need is attention.

For these media, there is nothing to say.

The mouth grows on someone else, unless you can kill the other person, otherwise, they are disgusting you.

Such things are taken out of context, at all times.

Li Wenhao didn't know the outside media, because the new materials they leaked had already caused a lot of noise.

But even if you know it, there is no big deal.

He is noisy to his noisy, so he can do his own thing with peace of mind.

After displaying the new material, Li Wenhao continued to introduce the new material after others returned to his seat: "I believe everyone has already seen this new material. If there is no problem with the new material, then I will continue to introduce it. ."

Speaking, Li Wenhao looked around to see if there were any questions.

I saw other people looking at him intently, but they didn't speak.

They are not really without doubt. As a new type of material, it is still a material that can be used to make chips. How can there be no doubt?

However, they also know that some questions are not suitable to be raised now. After the meeting is over, when the R&D work is formally entered, it is not too late to discuss and study slowly.

After Li Wenhao explained the new materials and then came up with new materials, everyone subconsciously turned to Li Wenhao's side.

It's not that other colleagues are partial, because the two sides are not at the same level.

If Li Wenhao only briefly described the plan, everyone might still be inclined to Wang Dequan. After all, the 5-nanometer process given by Wang Dequan is a common practice internationally. The only difference is the difference in details.

In addition, Wang Dequan has been studying the 5nm process at Huawei HiSilicon for a long time, and there is a very high probability that the 5nm process has been realized.

But all of this is based on Li Wenhao's little deeds.

Now Li Wenhao suddenly gave new materials, just like when he was fighting the landlord, a bomb came directly after the card was played. Although it is not as shocking as Wang Zhi, it also shows that the card in Li Wenhao's hand is absolutely desperate. Of cards.

Li Wenhao has indeed not described how to use this new type of material to make a chip with a 60 picometer process, but now it is about the feasibility study plan, which is a general plan, and it will not be too late to study the details in the future.

Some people even think that perhaps at the end of the talk, Li Wenhao directly took out a 60 picometer chip, they would not be surprised.

They seemed to know how Li Wenhao solved the accuracy problem at the moment.

With the materials available, how to make "transistors" on this material is the most important and most anticipated thing.

Sure enough, after Li Wenhao introduced the new material, he began to introduce the equipment problem.

Li Wenhao operated the holographic screen and turned it down.

Title: "On How to Make a Lithography Machine."

When everyone read this title, they couldn't help but take a breath.

Fuck, does this mean to make your own lithography machine?

At first, everyone thought they would buy a Dutch EUV lithography machine as a chip for the 60 picometer process. After all, this is the most advanced lithography machine at present. Apart from this, they could not think of any way to solve this problem.

But they never thought that Li Wenhao's ambition would be so strong, not only to get new materials out, but even the lithography machine wanted to make it by himself.

Although I was taken aback by this title, I thought about it and felt a bit taken for granted.

Although the EUV lithography machine produced by ASML in the Netherlands is the top lithography machine, it is really impossible to make 60 picometer chips.

Since even the top EUV lithography machine can't do it, can the lithography machine made by yourself be able to do it?

This question emerged in everyone's mind.

The production of lithography machines cannot be done by ordinary people. Even the EUV lithography machines produced by ASML in the Netherlands are not produced by a company solely based on ASML. They are products produced by combining the technical strength of the world's top companies.

Such a lithography machine can not meet the production of 60 picometer technology chips, can Li Wenhao's own lithography machine can achieve this function?

Or in other words, like new materials, physical machines have been manufactured?

Thinking of this, the people sitting under the conference room looked at each other, and then looked at Li Wenhao with fiery eyes.

Not only them, but Wang Dequan, who was sitting on the side, was full of eagerness in his eyes.

Li Wenhao was stared at by everyone's eyes, and his hair was straight in his heart. He couldn't help but jokingly said: "Brothers, don't look at me with this kind of eyes. I have no special hobbies, and my hobbies are normal."

Hearing this, everyone burst into laughter.

"As for the lithography machine I introduced, I haven't made it yet, but I believe that after listening to my introduction, you can basically judge whether you can make a similar lithography machine." Li Wenhao explained .

This kind of brand-new lithography machine, but Li Wenhao transformed it from the classic model of the apocalyptic world, in order to be able to manufacture it at this point in time.

Of course, at this point in time, because of the lack of many materials, all substitute materials are used.

This kind of lithography machine is more than enough to make a chip of 60 picometers, there is no pressure at all, but the cost will be higher.

Now the competition is feasibility, and it is normal for the cost to be higher.

If the Dutch ASML knows that Li Wenhao has such a lithography machine, even if it is expensive, it will have to be purchased. This is related to the future development of the Dutch ASML, and it is worth the money.

However, the Dutch ASML does not know that a lithography machine that is far more advanced than the EUV lithography machine will be born in this test.

After waiting for the laughter for a while~www.wuxiaspot.com~ Li Wenhao began to introduce the new lithography machine production.

Compared with the introduction of new materials, when Li Wenhao introduced the lithography machine, everyone was very quiet, all attentively, for fear of missing some details.

They know a lot about lithography machines, but they know very little.

They have a lot of questions, but they also know that these questions are not raised now.

Without the questions from the following people, Li Wenhao explained much faster.

The whole person was talking about it, and after twenty minutes, I finally finished introducing the lithography machine.

"Do you have any questions about the lithography machine?"

After the explanation, Li Wenhao habitually asked.

After asking, he had some regrets.

High-speed text hand typing to find a list of chapters in the end world