Infinite Doomsday Start Draws Luodu Mechanic

Chapter 162 MP5 sister G36 sister

G3 is a classic old gun. Google search reading

H\u0026K Company quickly expanded a variety of modified guns including submachine guns, light machine guns, and sniper rifles through partial transformation based on the G3 rifle.

HKMP5 submachine gun, HK21 general-purpose machine gun, and even PSG-1 precision shooting rifle are all directly developed from the G3 system.

G3 can be said to be the first leading actress of H\u0026K.

[I hope readers will remember our domain name Taiwan Novel Network →𝒕𝒘𝒌𝒂𝒏.𝒄𝒐𝒎]

After replacing the G3 automatic rifle for Roger who used MP5, Ruger simply replaced the gun for Roger who used G36.

This is also good.

Now the ammunition used by the five people on Roger's side, including Sarah, has been replaced with 762 caliber full-power rifle bullets.

Two G3 automatic rifles, one HK21 general-purpose machine gun, and two HK417-16-inch barrel assault rifles.

The only thing that has not changed is that they are still HK's light weapons.

After changing weapons, Rogge, who used to use the MP5, which has a very similar main structure and usage to the G3, also began to teach the one who used the G36 to adapt to this gun.

After all, this is an old gun, and it cannot be compared with the new guns of the 21st century in terms of ergonomics.

For example, this gun does not have an empty chamber hang-up function. If you empty the magazine and change the bullet, in order to ensure that there is no problem with loading the bullet, it is best to pull the bolt handle back to the hang-up position before changing the magazine.

After completion, the bolt handle must be released from the hang-up position.

Sometimes, in order to save trouble or the user has a special hobby, they will pat the receiver to release the bolt handle from the hang-up position.

Of course, if you want to achieve the same effect, you can also change the order, first change the magazine, then pull the bolt handle back, pull it to the bottom without hanging it on the hanging position, and release it directly.

The latter method is relatively rarely used, mainly because of the previously mentioned problem that it is easy to cause problems, which is caused by the structure of the semi-free bolt roller delayed locking.

Even the MP5 sister had problems when demonstrating the latter method to the G36 sister.

The MP5 she is used to using has no problem using this method, because the MP5 uses 9mm PA bullets. The length of this pistol bullet is only 19mm.

The magazine loaded with this bullet can be held tightly with one hand.

However, the G3 uses 7 bullets, and the magazine side width is only higher than 51mm.

This magazine is not impossible to hold with one hand, but it is difficult to use strength.

The bolt locking caused by the ball delayed locking requires a lot of strength to push the magazine up.

As a result, the MP5 sister took the G3 magazine and pushed it up from the lower receiver three times before finally pushing the magazine into place.

So the next time she pulled the bolt handle to the rear stop position, the bolt lock was open, and she could easily put the magazine into position.

Then release the bolt handle, and the first bullet at the top of the magazine can be safely and quickly sent into the chamber.

To be honest, Ruger had never used the G3, and he didn't know it had this problem.

However, just when Ruger thought that the two sisters over there had adapted to the new firearms and could continue to go deeper into the underground maze, the two of them actually studied the mechanical sights of the G3.

Okay, Ruger had studied the problem of mechanical sights before, so he wanted to show off.

However, he just took two steps and was scared back by the words of the MP5 sister.

"Look, its mechanical sight uses a rotary drum type, with four gears on it. The last three gears are all peep-hole type, and the first 100m uses a notch type."

"If we use it, we can just use this notch."

Good guy, there is such a thing?

Ruger quickly took out a G3 and fiddled with it in the logistics space, only to find that the rear sight of this guy was indeed a rotating drum structure, with a gear every 90 degrees, a total of four.

The front sight is a typical column type.

Comparing it again, even the MP5 and the early version of HK416 use the same machine sight.

In this way, it is no wonder that the MP5 sister is so familiar with this thing.

While Ruger was fiddling with this thing, he felt that the designer of this thing was really a genius.

This drum-style sight, from the side, is tilted.

In this way, the human eye can only see the highest position, and then see the column-style sight in front of the gun, without worrying about other gears blocking the line of sight.

After this time, the two finally completed their familiarity with the new gun and signaled Ruger to move forward.

Ruger had a good impression of this Roger named Isa who used to use MP5. Hearing this, he couldn't help but smile at her, and then turned around and walked forward first.

He could hear the warning of the old man who was conducting the investigation in front, wearing a self-made Iron Man armor.

There was no warrior-type Nephalem like Minerva who could naturally serve as a secondary defense in the team.

In order to prevent the previous incident of 417 Bella rushing too far and being besieged by monsters from happening again, he had to lead the way in front.

As soon as he left, he heard the four Rogge sisters in the back row start to chatter and play there.

The core content was whether Rogge would "take action" on the MP5 sister.

Rogge thought to himself that he was a gentleman, so why was he regarded as a pervert?

As a result, it turned out that Anya, who had been working without any effort, had come to Rogge's side at some point, fanning the flames and adding fuel to the fire.

In the end, even Sarah couldn't stand it anymore, so she grabbed her ears and dragged her out, handing her over to her step-grandmother, Tia, for "strict discipline."

Even so, the blatant discussion of the four Rogges was suppressed by their superiors, but they still whispered in each other's ears during the journey.

Counting the time spent on handling things in Rogge Town, plus the time spent on rebuilding the second shelter, it has been almost twenty days since he went down the maze again.

Such a long time is enough for Rogge to improve all his attributes to 10 points.

This naturally includes the perception attribute.

As a result, the private conversations of the sisters that the Rogges thought no one heard were heard by Rogge.

G36, who had just received a favor from MP5, must have spoken for MP5, but HK21 spoke just like the gun she used, "bang bang bang", "bang bang bang".

Finally, 417 Bella always added a final word at the critical moment, which really beat the two fire assaulters (using submachine guns and assault rifles) to death.

Ruger pricked up his ears to listen to their quarrels, and the more he listened, the more he sighed. Could it be that when these Rogues chose weapons, they all followed their personalities?

Fortunately, this embarrassing scene did not last long. The dark shooters and bloody sheep heads who emerged in front of the maze rescued MP5.

This time, Ruger did not use the rapid-fire cannon directly.

In addition to the excessive noise, he also had to consider the cost issue.

As he said when he quarreled with the paladins in Rogue Town, the exchange price of this shell was not low, and it even cost five points without discount.

At this price, even if the enemy he was dealing with was a nightmare-level monster that could earn him 40+ points per head, he still felt that the ammunition was a bit of a loss.

After all, he was calculating carefully, but Tia didn't care about that when throwing bombs.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like