Let you modify it, what the hell is this fighter engine?

Chapter 102: The Making of Fighter Engines!.

In the following time, with the addition of two apprentices, Jiang Qing hardly needed to worry about the modification, and he only needed to point out some core issues.

After they finished modifying the car, Jiang Qing scanned the system again, and if there was a problem, he would solve it himself.

In this way, Jiang Qing’s time is much more abundant.

As the sun set, after another day of school, Jiang Qing looked at Liang Zhichao and others who were pondering modifications outside the store, exhaled deeply, and then turned around and walked towards the store.

Coming to the warehouse at the back of the store, it was already full of things, including molds, plastic clay, various electronic parts, blank circuit boards and a small circuit board soldering machine.

That’s what he’s been preparing for this time.

He did not hesitate, turned around and took two large barrels of rare metals that had been detained, and a large number of parts placed next to the furnace. After steadying his mind, he directly raised his hand to activate the white high-temperature furnace in front of him.

Today, he will officially start the manufacture of the furnace!!

The furnace in front of it consists of a bottom 20-seat console and a cylindrical melting furnace above. Skillfully operating the control button under the furnace, the furnace temperature gradually began to rise. He hasn’t been doing a hands-on modification during this time, and that’s because he’s been preparing for the day.

The mind is constantly thinking about the details of the process of pushing the engine manufacturing of the fighter, and the things that need to be prepared to learn, such as the furnace in front of you. During this time, he had already thoroughly studied the operation methods and some precautions of this furnace, and even actually operated it several times. In order to start using this furnace at this time to build fighters without error.

As the temperature of the furnace became higher and higher, and the temperature of the air in the warehouse continued to rise, Jiang Qing glanced at the degree displayed on the furnace display.

Without hesitation, directly turn off the heating, and do not put the material at the beginning, that is because high-end rare materials need to be preheated for magazine elimination before fusion.

Then, he controlled the furnace to slowly lower the melt opening, then lifted the bucket filled with a barrel of rare metals on the ground and began to pour.

However, it did not fall all down, but only poured half of it, and then continued to operate the furnace to rise, continue to control the temperature and start melting.

Seeing this furnace in operation, the machine couldn’t help but nod with satisfaction, this furnace is indeed expensive.

You don’t need to work hard to get the material into the material, but there is an automatic lifting function, and you only need to control it to put in and pour out the metal material inside.

Soon, as the temperature became higher and higher, Jiang Qing glanced at the temperature on the display, more than three thousand degrees, and the duration was already ten minutes.

At this temperature and time, the rare metal should have almost melted.

Without hesitation, Jiang Qing immediately walked to the corner on the side, picked up a mold, and put it next to the furnace, which was divided by the part construction diagram extracted by Jiang Qing from the system plan.

Then find an online mold shop to provide drawings.

This kind of mold is resistant to high temperature, and the melted metal can be directly poured into it to shape it, but the accuracy of the parts created by this method is definitely not enough.

It is also necessary to carry out high-precision grinding and cutting after the subsequent high-precision lathe arrives to create a complete part. At this time, Jiang Qing operated the furnace to descend, and placed the mold in the metal dumping port.

Soon, the melted rare metal inside began to pour out and fall into the mold.

After a while, all the metal solution inside was poured into the mold, and as the hot metal poured out, the air above was a little distorted.

Jiang Qing couldn’t help but start sweating, he smashed his mouth, took a pair of heat-insulating gloves to move the mold filled with metal to the side, and then took a new mold again.

But he did not rush to put metal into it again to melt, but raised the furnace again, and still began to heat up. Every time he melts, he has to clean up the impurities, because without forging equipment, he can only make the metal as pure as possible to ensure strength.

Soon, Jiang Qing lowered the furnace again, still poured half a barrel of rare metal, and began to melt again. The operation is still the same as before, or the metal is poured into a different mold for shaping.

Then, as this melting operation became more and more, Jiang Qing’s techniques became more and more proficient, and his speed was much faster.

It didn’t take long for him to melt all the rare metals into the mold, and most of the prototype of the core parts were molded in the mold, waiting to cool.

But Jiang Qing did not stop, but gathered some discarded parts around him and poured them into the furnace 570 little by little.

After all, no matter how the fighter engine is, it is impossible to use all rare metals, just some core parts, and most of the cylinder walls are still using normal metals.

Then he took a few larger molds, which were the outer wall enclosing structural molds.

Melting these normal steel parts is much faster than melting rare metals, after all, the melting point of rare metals is as high as more than 3,000 degrees, and the melting point of steel is only 1,500 degrees.

With a high-temperature furnace, soon the molten steel and other metals needed to surround the structure outside the cylinder wall have melted and injected into the mold.

Jiang Qing looked at the mold in one place, and he was relieved in his heart, and a satisfied smile appeared at the corner of his mouth. Most parts and structures of the fighter engine only need to wait for time to demold before they can be assembled.

Other small accessories that he can’t make himself, and electronic component controllers, he has also found professional manufacturers online to order one.

And now the only and biggest problem is the high-precision grinding of core parts. This requires waiting for high-precision lathe equipment.

Thinking about it, he looked at the door of the store, it seemed that he had to let them speed up the renovation process….