Let you modify it, what the hell is this fighter engine?

Chapter 107: Engine Manufacturing Completed!.

The lathe fell, Jiang Qing wiped the sweat on his head, looked at the three of Liang Zhichao, who were also panting, his eyes moved slightly, and waved at the three and said.

“Let’s go practice the use of the practice tools first, I’ll call you again if something happens…”

Hearing his words, the three of them were slightly stunned, and then nodded to Jiang Qing.

In fact, they also had some doubts in their hearts why Jiang Qing would buy this kind of lathe, because there was already a lathe sent by Yangchi in the store.

In fact, if it was just a modification, Yangchi’s lathe was definitely enough, and they couldn’t figure out why Jiang Qing would buy another one. In the end, it can only be attributed to Jiang Qing’s itchy hands after getting the modification fee, and he couldn’t help but buy a better lathe, and after Liang Zhichao and the three left, Jiang Qing turned to this new store, and the corner had been stacked with parts blanks that he had demolded before, and some electronic components he bought.

There were some small accessories and special parts that he was not convenient to do himself, so he managed to order some.

Then Jiang Qing walked to this high-precision lathe, found the plug, connected the industrial electricity in the store, and started to start.

In fact, he asked Liang Zhichao and the three to go out to practice not to let them learn fighter engines, but this was also the first time he made it, and not 20 could distract him because they were on the side.

In the unlikely event that a part is scrapped while cutting, it takes several days to wait for a part. He already has some impatience to build the fighter engine, and there is no room for mistakes.

Soon the lathe was successfully started, and Jiang Qing took a piece of scrap metal material from the side and put it into the lathe to fix it.

Then I went to the side of the operation desk, because of the pursuit of precision, so this lathe is a digital lathe, controlled by a microcomputer. In the past few days, he has been sitting in front of the store reading a book, he is learning to study the use of lathes, to know that normal turners learn the operation of lathes, generally it takes several years to learn.

But Jiang Qing only studied for less than half a month, and without a lathe, he just learned the theory.

So he now has to use some worn-out metal to try out the operation methods he has learned to prevent mistakes when machining the fighter engine.

After a while, Jiang Qing looked at the several parts that he had already processed in front of him, and nodded with slight satisfaction, after the operation he had just done, there was no problem with those worn-out metal materials.

He also has a little more experience in actually operating this lathe.

Then he experimented with a few pieces of discarded metal again, and his eyes finally fell on the parts blank of the fighter engine. After hesitating for a moment, Jiang Qing still decided to start cutting, and now everything is ready, only he owes him a hand.

The next moment, he stepped forward and picked up a not very large fighter engine part, and used this to test the water first, but even if it failed, it would not be so troublesome to manufacture it back.

He then placed the part on the lathe and then wrote the operation into the program.

Learning CNC machine tools is like learning micro-programming, relying on computer operation, most of which do not rely too much on labor, but for computer control requires certain conditions.

Otherwise, the damage of this part is small, and there is a risk of scrapping the lathe.

After a while, Jiang Qing entered the program into the lathe control system, and the lathe immediately began to run.

The edge of the blank part is precisely cut off by the irregular scrap that melts overflowing, and the melting polishes the entire circle of the part to ensure accuracy.

Then Jiang Qing carefully took out the processed and polished part, picked up the horizontal ruler and magnifying glass on the side and began to measure.

After a while, a smile appeared at the corner of his mouth, and the accuracy of this part was indeed what he needed, and he was relieved in his heart.

However, he was not careless, but carefully fixed another part again. Still writing programs, the lathe ran again and began to polish fighter parts.

The fighter engine scheme given by this system, although the engine volume is not as huge as imagined, but it is also slightly larger than the normal car engine.

Therefore, the outer envelope of this processing is more, which is more time-consuming.

And this fighter engine is a turbofan jet engine, so there are more core parts in it.

But with Jiang Qing’s continuous operation of the writing program, these parts are still being created little by little. Finally, after working for hours, he finally polished all the parts, without any mistakes, all the parts were intact, and there was no problem with accuracy.

Looking at the large pile of parts in front of him, Jiang Qing flicked his somewhat sore arm, but did not stop the message, but continued to pick up the special high-strength screws that had been ready to be ordered.

Normal screws cannot maintain the high-intensity operation of the engine, and only this high strength can maintain the normal operation of the engine.

Then he started assembling the parts piece by piece, first assembling several frame enveloping structures, and then installing the core parts on the holes reserved for the frame.

He meticulously completed the installation of every part, without being careless.

Soon, as Jiang Qing became more proficient in installation techniques, a fighter engine slowly appeared in front of him.

Most of the engine parts have been installed. Then there are circuit components and controllers, in fact, this installation is quite simple, no step, the system will prompt.

In this state, soon, the full version of the fighter engine was finally installed!! The time and energy Jiang Qing spent for this moment can be described as enormous.

On the surface, it seems to be leisurely reading, but in fact, I have been learning the use of the furnace and the operation of the lathe, and this is all to build this fighter engine.

That’s the highest power scheme he can make in the current system! Thinking about it, he suddenly summoned the system panel and looked at the top of the power scheme.

Suddenly, his gaze froze slightly, and he saw that it was originally the location of the fighter engine, and a new scheme appeared on it – 917-turbojet engine!

Jiang Qing’s heart was hot, it seemed that he still had a long way to go…

Just as he was about to exit the system, suddenly his eyes were slightly stunned, and he looked at the system taskbar, which was actually displayed.

[Upgrade mission: Modify any ten vehicles to reach C level.] 【8／10】】

Jiang Qing was a little confused, is this the four cars that he guided Liang Zhichao to modify before?

Thinking about it, a trace of fluctuation flashed in his heart, and he raised his eyebrows, then if you accept more apprentices in the future, wouldn’t the system upgrade be easy?

But soon, his gaze immediately returned to reality.

A fighter engine like a sweet cone, quietly placed on the ground, although no fuel is added, but the tail jet gives people a sense of gushing power!

Looking at this beast-like mechanical product, Jiang Qing finally breathed a sigh of relief in his heart, a gratifying smile appeared at the corner of his mouth, and there was a faint excitement in his eyes!

This is the engine that I have been working on for so long!

Although he was still a little excited in his heart, his body was already very tired. To make such a thing with the heart, the mental consumption is really huge.

Rubbed his somewhat astringent eyes, slowly walked out of the store, and before he knew it, it was already dark outside, and Liang Zhichao and the three did not know when they had left work.

He stretched again, and although he wanted to go back and take another look at the engine, he shook his head slightly and walked in the direction of his house.