Let you modify it, what the hell is this fighter engine?

Chapter 151: Liang Zhichao Builds Engine!.

Hongyuan repair shop.

Today happened to be the weekend, and Liang Zhichao sat on the chair where Jiang Qing was sitting early in the morning, slightly out of his mind.

“Harm, the boss is not so boring….”

In the past few days of sleeping, he has been thinking about entering the Dragon Science Institute. Following in Jiang Qing’s footsteps is what he wants to do the most now.

Jiang Qing is not there, he always feels that his life is missing something, as if he does not have the passion and vitality that Jiang Qing had when he was there. And now the problem before him is to build a fighter engine!

Only in this way will he have the opportunity to enter the Dragon Science Academy!

But this is easy to say, if you want to really implement it, it is difficult, this fighter engine is not anyone who wants to make it, otherwise Lei Xue will not make a big move, and personally invited Jiang Qing.

Regardless of the technical problems of the equipment, the most important point alone, the engine drawings are not something that Liang Zhichao can design. Every fighter engine design drawing is designed without knowing how much manpower and effort can be designed.

Except, of course, Jiang Qing…..

Thoughts flutter and thoughts run wildly in your head.

“Can do it!!”

Soon, he had a flash of light, and the thoughts in his mind gradually became clear.

In his heart, he wanted to build an engine, which was nothing more than these points, first of all, equipment, secondly, drawings, and finally the assembly process!

Liang Zhichao glanced at the inside of the store, this equipment problem is not big, there is in the store, he knows very well how Jiang Qing built the engine.

It was built with the equipment in this store.

He does not have the ability to build an engine himself, so he will first copy Jiang Qing’s way of building an engine!

Thinking about it, he quickly got up and walked to the shop on the left with a high-precision lathe, his eyes scanned the inside of the store, and his eyes suddenly lit up.

I saw that in the corner of the store, there were still a bunch of fighter engine molds, and my heart suddenly moved.

“With!!!”

Although he did not have the drawings, these molds were manufactured according to the drawings, so he only needed to use these molds to melt all the parts needed for the fighter engine.

Then there should be no problems with the assembly, then there should be no problems…..

There is no need to worry about the materials, Jiang Qing originally planned to build the newly unlocked engine, so he has collected a lot of rare metals, which is enough for the time being.

Thinking about it, Liang Zhichao was faintly excited in his heart, in this way, several major problems are basically solved now, his only problem is to learn how to operate and control that high-precision lathe, otherwise, he has no way to polish the hole when the blank of this part comes out.

And this also requires some technology, you must know that Jiang Qing was in order to understand the lathe, but he often sat at the door and looked at the knowledge about it.

After sorting out his thoughts again, Liang Zhichao took a deep breath, lathe grinding is still in the later steps, first he melts the molded parts blank.

At that time, while melting rare metals, working on fighter engine blanks, and then learning how to operate lathes. Thinking about it, he didn’t hesitate, just do what he said, turned around and walked towards the store.

Because there was no business, Ma Yuan and the two did not come often, so that they would not disturb his operation. Coming to the store, Liang Zhichao went directly to the warehouse in the back, and inside was a high-temperature furnace!

Press the switch directly to warm up, then rummage on the side, and soon he found a large vat full of rare metals that had been removed from discarded parts!

This is the material that Jiang Qing collected with them during this time.

Looking at the materials in the vat, Liang Zhichao couldn’t help but show a smile at the corner of his mouth, which saved him a lot of time! Soon, as it heats up, the furnace is preheated and ready to start melting.

After thinking a little, Liang Zhichao lowered the furnace, lifted the barrel, and did not put too much material, but only put a small part This is to master the temperature and control of the furnace, he is not like Jiang Qing in advance to learn the knowledge of various equipment, he can only slowly explore by himself.

Soon, watching the temperature on the instrument gradually rise to a certain height, he hurriedly lowered the furnace, and the first pot of rare materials put in was finally smelted!

Looking at the effect of the melting place, Liang Zhichao’s eyes moved slightly, and he nodded with a little satisfaction, the materials put in it have been melted, and there is no big problem…

Then he began to be bold, adding a large part of the material, still repeating the previous step.

After a while, the material was melted again, the furnace was lowered by half, and then the mold was hurriedly put over, and the furnace was dumped again.

Suddenly, the melting liquid of the rare material was poured into the mold.

This step is then repeated, the rare metal in the barrel is melted, and then poured into the mold.

“Whew—-”

For a long time, Liang Zhichao touched the sweat on his head, stuck in the empty vat in front of Nehe’s eyes, and the molds that were already piled up on the side, and finally exhaled.

In this way, the first step in creating a fighter engine is finally completed!

Without hesitation, he trotted all the way to the manual of the high-precision lathe in the store on the left, and began to study and learn. Just wait for the mold to cool down, and he can start grinding on the lathe.

I have to say that the operation of this lathe is indeed very technical, which has been watched for several hours, and Liang Zhichao has only figured out a little clue about the use of operation in 4.0.

Rubbing his somewhat swollen head, he gritted his teeth and continued to study.

As the sun set, soon the time came to the afternoon, at which time Liang Zhichao finally came to his senses and took an ordinary car part from the side and fixed it on the lathe.

Turn on the protection mode of the lathe and start trying to operate it.

The protection mode is not easy to blow up the machine, and if there is any error in the program he entered, the lathe will stop running on its own.

Then he tried a few useless car parts in succession, triggering several protection modes along the way, but there were no major problems yet.

After practicing his hands a few more times, his eyes finally fixed on the mold he made in the morning, and he couldn’t help but feel a little itchy in his hands.