Madam, As Much As You Want

Chapter 149 F22 cruise? Chen Chong is not used to it!

"Someone is in charge of research on the catalyst!"

"Other aerodynamic researchers, first to study how to maintain the airtightness and stability of the engine power compartment under the huge thrust of metallic hydrogen!"

"The rest of you who have research on pressure science, study the preparation method of metal hydrogen with me!

"I already have a clear direction for preparing a large amount of metallic hydrogen here!"

People who have studied metal hydrogen asked:

"Is it the diamond that creates some kind of extreme high pressure on the anvil and then generates the fifth state of hydrogen?55

Chen Chong shook his head and smiled:

"That's definitely not the way to go!"

"It's too cumbersome and too short a duration to create an extremely high pressure state with a diamond against an anvil!55

"In such a short period of time, it is impossible to produce enough metal hydrogen for various engine fuels!"

"This method, I ruled it out in the first place!"

"Because this method belongs to the method of preparing metal hydrogen in the laboratory, it cannot be applied commercially in a large area!

Chen Chong made a precise calculation of the pressure of hydrogen to metal conversion a few days ago.

After calculations, Chen Chong came up with a clear answer, the critical 23 pressure for the transformation of hydrogen into metal is within the range of 1 million to 10 million atmospheres.

Under such conditions, the method of preparing metallic hydrogen becomes obvious.

That is by over-compressing a certain amount of water!

Chen Chong found two mature methods based on the details of the metal hydrogen he spent hundreds of billions on.

One is dynamic compression.

It is to use rapid shock compression from a strong magnetic field to obtain high pressure to produce metallic hydrogen.

This dynamic compression method, in the materials purchased by Chen Chong, has a special equipment manufacturing method corresponding to it.

Using the supporting equipment, a full amount of metal hydrogen can be produced at one time.

Moreover, the metal hydrogen prepared by this method has high quality and strong stability.

The metal hydrogen produced from the equipment can be used directly as fuel.

Chen Chong is most optimistic about this method.

Because this method uses a magnetic field to create a sufficient amount of pressure, it is not difficult to achieve.

The other is called static compression.

It is to use a press with a weight of more than one thousand tons or a hydraulic press with a height of nearly ten stories to generate a high pressure of 1 to 2 million atmospheres!

Metal hydrogen is produced by compressing liquid hydrogen in this way.

This method is simple and rude, which is to do everything possible to create a higher high-pressure environment.

But the metal hydrogen produced by this method is very unstable, and it is very similar to the extremely high pressure state produced by diamond on the anvil.

From the detailed information he purchased, Chen Chong can clearly know that the metal hydrogen produced by this method will be the method used by many civil scientists in the future.

It is very laborious, the output is very small, and it is extremely unstable.

The metal hydrogen produced in this way must also be processed by special methods before it can be used as a fuel.

In the detailed explanation of the metal hydrogen preparation method purchased by Chen Chong, this manufacturing method is mainly used to compare with the dynamic compression method.

After determining the method for producing metallic hydrogen, Chen Chong looked at the researchers present, and at the same time opened the machine preparation method of the dynamic compression method, and said:

"Through my research, I have found a way to stably and massively produce metallic hydrogen!"

"It's dynamic compression!"

"Using the powerful magnetic field produced by the device to generate enough pressure!39

"There are two uses for this device!"

"One is to directly add pure and impurity-free water. Under extreme high pressure, the gaps between molecules will be compressed to the extreme, so that hydrogen atoms and oxygen atoms will begin to separate!

"Oxygen atoms will be absorbed by the machine's special equipment, leaving only hydrogen atoms to continue to compress! 99

"The advantage of this method is that the raw materials are inexhaustible and inexhaustible!"

"Because the combustion principle of metal hydrogen is not fundamentally different from the combustion principle of hydrogen!

"It all burns in oxygen!

"The combustion of hydrogen and oxygen produces pure water."

As a new energy source, hydrogen has obvious advantages.

Some see hydrogen as 'world's cleanest energy source'

0

Because its combustion product is just water.

Hydrogen has a high calorific value of combustion.

The heat produced by the combustion of hydrogen of the same mass is about 3 times that of gasoline, 3 times that of alcohol and 4 times that of coke.

What's more, hydrogen is an energy carrier that can be stored.

There are many technologies that can produce hydrogen.

However, hydrogen production from wastewater is undoubtedly attractive.

Because it also has the function of wastewater treatment, it can kill two birds with one stone.

Dongguo has also researched deeply on this.

With the support of the National Natural Science Foundation of China, Professor Ren from a technical university in Northeast China began to study the mechanism of hydrogen production in organic wastewater since the early 1990s.

It adopts fermentation biological hydrogen production technology to generate hydrogen by decomposing organic matter, thereby purifying wastewater.

Therefore, some scientists believe that hydrogen energy can play an important role in the global energy arena in the 21st century.

The metal hydrogen produced under extreme pressure is also hydrogen, but it only exerts a terrifying pressure on the hydrogen.

After burning, water is formed.

in the further future.

If metal hydrogen fuel is popularized in the future, all kinds of engines that need to use hydrogen fuel will be equipped with small responsive compression devices.

Small compression devices can be powered by electricity, using carbon-based high-energy batteries.

The clean water resources produced by the combustion of metal hydrogen in the engine will directly enter the small compressor, and the 790 will be recompressed into metal hydrogen and then transmitted to the engine.

This cycle goes back and forth, providing a steady stream of full energy to the engine!

The power storage capacity of high-energy carbon-based batteries is extremely terrifying.

Chen Chong learned from the information he purchased that in the near future, this high-energy carbon-based battery, after being fully charged, can make a car last for a whole year!

If it is a civil aviation aircraft or a military fighter jet, another high-energy battery will be used.

Once fully charged, it can also be used for a year!

"The manufacturing principle of the equipment, I will distribute it to you later!"

"After you have thoroughly researched, you can start production!"

"Only when the dynamic compression device is manufactured can we proceed to the next step of research!

A month later, the Academy of Sciences in the United States has not produced any results.

But from time to time, I can get some news from Chen Chong's side.

This makes it difficult for the Americans who have always believed that Millikin can continue to be great.

"After half a month, let the newly produced F22 go on a Pacific cruise!

"In any case, let Chen Chong stop his research!"

"At the same time, our Congress will also issue a note to ask Dongguo to stop its research on aero-engines!"