Magic Tower Starry Sky

Among all the groups, the most complicated work is of course the repair team of the airship body. Although this level of repair, in the eyes of others, it is no different from a remake.

The first thing to be completed was the main structure of the airship, that is, the shuttle-shaped hull. The reason for rushing to complete this part is because there is no shipyard or worker's dormitory on site. The hull is completed as soon as possible, and it can also serve as a place for rest and work.

Basically, as long as it does not occupy a large area or requires ventilation, it will be carried out inside the ship. After all, it was too cold outside, even if it was wrapped in a layer of snow wolf fur, the biting wind would still get in through the gaps in the clothes, making people shiver with cold.

Although the crashed original airship pod has been repaired and remodeled, some bulkheads are still damaged. It will not be fully closed until Riley has made a suitable plank. However, it is not a big problem to temporarily use the extra wolf fur to cover it.

Lin even took out the magic metal water pattern copper from the materials he carried, and put a film on the inside of the hull. And using this layer of metal film, let Fern describe the magic circle covering the hull.

In addition to blocking the invasion of wind and snow, it also has the function of heating the cabin. In fact, this layer of magic metal film played a large role in Lin's design, although it has a great experimental nature. However, we have to wait for the follow-up work to be completed before we can cooperate with the arrangement.

The part that needs more attention is the boat-shaped cabin on one side of the original pod. Due to the fall, the keel part was damaged. According to other people's suggestions, the part that was damaged but the keel hadn't broken was used as the upper half of the shuttle-shaped hull, because the weight was borne by the lower half.

However, this opinion was not adopted by Lin. Because in his design, the entire shuttle-shaped hull will bear the wind pressure brought by high speed, and there is no part that can use such substandard parts that are about to be damaged. In addition, Lin designed an anti-gravity device that was different from the common sense, so the keel that was about to be damaged was reinforced with someone's treasured iron.

The processing characteristics of Hibiscus iron are very similar to water pattern copper. Water pattern copper can be transformed into a very thin sheet by magic shaping, which can be coated on any object to form an outer film.

It is difficult for ordinary craftsmen to make good weapons and equipment by using the characteristics of water pattern copper. Most of them are magicians who play art and use them to make floating board carving works. Therefore, in the market belonging to magicians, water pattern copper is a rare material with a low unit price. Because there is no market in itself, no one will mine it in large quantities.

But with such characteristics, a layer of film can be wrapped on the ordinary material, and then the magic circle can be carved to form a magic circuit. This kind of use was actually discovered a long time ago, but all the weapons and equipment were of the melee type, and the water-patterned copper film had no defensive power at all, especially the thinner it was, the easier it was to damage.

But someone is using it for parts that don't directly confront the enemy, like the magic tower in the past, or the airship now.

The characteristics of Hibiscus are also very similar, they all need a base material and then attach to it. Mythite can be transformed into a liquid form by Sculpture, infiltrating the pores of other materials. Even a high-level magician can make secret iron become like water, 'soaking' other materials.

But this is not the same as the so-called alloy on the earth. One is one, and two is two. The same object has two characteristics and can be used for two purposes. Therefore, secret iron is a difficult material for most magicians in Lost Land.

But at the moment, secret iron can just be used as a material to strengthen the keel, and the keel can also be attached with magic and mark the magic circle. Ordinary materials can't be so messed up. Ordinary materials that can't carry magical power will be eroded by power and decay.

The junction of the upper and lower halves of the shuttle-shaped hull is fitted with magic materials at the edge of the original hull, and then buckled together from top to bottom. The reason for being so cautious is that the joints of the wings, rudder, and the external engine are to be arranged along the horizontal central axis of the shuttle-shaped hull. General materials cannot meet the complex structure designed by Lin. Strength of.

The main structure was completed, and then Lin made a second small division of labor. Two female silver-bearded dwarves, Marit and Freya, are responsible for the production of the wings and rudders. There is no difficulty in this part by using the 3D stereoscopic solid scale explosion diagram that can be understood by a fool. , Just follow the table and do the lessons.

As for the source of the material, the part of the wing surface is the residual airbag fabric of the original airship; the skeleton part is the magic metal with relatively high rigidity, light tile steel, among the magic materials of the original airship.

The Walley steel, which has a similar name, is hard and heavy; the Tilted Walley steel is hard, light and tough. Of course, the value is relatively high, so there are only a few goblin cannons on the original airship, and such magic materials are used in key parts. Therefore, during the repair process, the amount of light tile steel that can be used is quite small. And before dismantling the cannon, Totocani tried his best to stop it. day by day

Ultimately, Lin used it for the skeleton part of the 'wings'. As long as Marit and Freya don't waste anything in the process, it will be just enough for the wings and rudder that Lin designed.

And Lin, Jermaine, and the goblin father and daughter started the production of the engine.

Although someone has touched the engine of the earth, he can repair it, or watch others repair it, and build one himself, which are two different things. In particular, the locomotive engine that someone has touched is a single cylinder, and the engine of a car is only a V-shaped six-cylinder. But the star engine has only seen the schematic diagram, and has never touched the real thing.

For this reason, Lin used a lot of calculations and simulations, and actually built and tested the effect of the real machine, and finally finalized the design of the engine. During the process, Marit, who was eager to intervene, returned to the work of the wing impatiently after hanging up two engines.

In fact, this is also expected by someone. Compared with other silver-bearded dwarves, Marit has skills and strength, but she is impatient and has the courage to face setbacks. The production of the wings can see the end point, and it is meticulous work. But the engine that has never been done is to find the way forward in the constant failure. In this regard, Jermaine can do it, and so can Goblin Totocani.

Fortunately, there are races like dwarves who are very familiar with metal, and magic materials can be shaped and changed by magic. Only in this way can the materials be recycled and remade in the continuous failure.

And making the engine in Lost Earth is not like on Earth. There is a big difficulty to overcome: materials. Earth's material science has no meaning in Midi.

This is because there are very few artisans who are lost, and it can even be said that they have no habit of using 'alloys'. After all, there are too many types of magic materials. If one material fails the test, you can always find another one that meets the standard and can pass the test.

Secondly, the alloy of the earth, no matter what kind of smelting process is used, different metals or different metals. From the perspective of molecular structure, there is a clear distinction between different metals.

But magic materials are different. Lin also analyzed the magic materials after obtaining the microscopic observation means. The so-called magic material combines a variety of heavy metal atoms that cannot be combined with geochemical knowledge at the molecular level to form a stable molecular structure, and it must be a complex polyhedron type.

As for how the atoms of these heavy metals break through the limitation of valence electrons, react with each other, and bond together, Lin has some guesses. And it also seems obvious that the answer is magical power. The power is filled in the molecular chain, connecting these atoms that cannot be synthesized, and this should be the reason why they are called magic materials and have special properties.

Lin once thought that since he could observe the molecular formula of the magic material, and knew that it was using power to catalyze its reaction. So is it possible for me to mass-produce some expensive and rare materials?

But just thinking about it once, let the water flow. Leaving aside the earth, the pursuit of alchemy, which is the alchemy of turning stones into gold, is still a joke among people drinking and having fun in modern times. In Lost Land, even if it is really done, it is probably not a means of making money, but a way of causing jealousy and death. And it is conceivable that this time they will face a greedy monster at the national level and endless pursuit.

In addition, magic materials are in the Lost Land, and the biggest use is in the production of weapons. To put it simply, if it is really possible to mass-produce magic materials with certain characteristics at will, it will only expand the war conflicts in Lost Land. It is neither beneficial to the people nor self, so it is sad to spend such a thought on doing these researches. So someone simply gave up this idea.

He also once thought about using the method of alloying magic materials to play ~www.wuxiaspot.com~ to create a mysterious material science. But the conclusion is that when different magic materials are fused together, in most cases, the advantages of each other are offset or weakened. If you are unlucky, unimaginable changes in response will occur, causing damage.

This is also understandable, why humans, elves, and dwarves, the forging method in Midi is only forging, shaping and other processing of raw materials, and then enchanting, without considering other kinds of deep processing that changes the nature of the object Way.

Also due to this environment, Midi has quite a few methods for the use of magic materials, which can simply solve problems that have plagued people on Earth for a long time. Among Lin's concerns, the two biggest difficulties in the production process were welding and airtightness.

On the earth, the joints between the same metal or different metals are not like wood, which can use mortise and tenon structure. In addition to using a large number of rivets, it is welding.

For machines such as engines, airtightness is especially important. Regardless of whether it is a cylinder that is activated by pressure changes, or a crankcase that maintains the lubricating oil capacity without leakage, if the sealing is not good enough, the power and life of the engine will be greatly reduced.

Starry Sky Chapter List