Monster Factory

Ye Qing received a metal expert on the way back to the airport, when the armed personnel carrying heavy weapons ambushed the news, it was already a metal expert from the Capital Airport to fly to Zhongyun.

Li Huaxing thought that the metal expert would call and tell him that he was not too fond of disturbing Ye Qing in the middle of the night.

Li Huaxing vowed that if he saw the master of gold, he would change his most sincere smile.

Just kidding, who is the cold-blooded killer?

The most important guy is the top mechanical engineer. Repairing the firearms is easier than repairing the toenails. These two combinations will unimaginable power.

The work of metal experts is earth-shattering, but it is good to stop Nikaya, not to mention headlines, to occupy a corner in the local newspaper.

As for who made the fire, the local police can not manage, and even dare not manage.

Just kidding, my eyebrows are shot.

The seven people who were shot in the eyebrows, the weapons they carried with them, did not come to an emergency.

The bullets in the eyebrows are all shot from the same weapon.

There will always be no armed elements, with a sniper assault rifle to ambush people, and finally suddenly stand in the same place, let people shoot at the end?

What is said, it is self-evident!

A simple investigation of the scene, the police in Nigaya, scared even the financials of the militants did not dare to search, the road cleaned up and slipped a foot.

The metal expert who started as a leader has already passed the security check and flew to Zhongyun City.

Before flying to Zhongyun's plane, the metal experts finally gave up a phone call and reported to Ye Qing that he could arrive at Zhongyun Airport in two hours.

If Ye Qing asked if the road was safe, the metal experts did not even take the initiative to mention this.

Ye Qing admits that he is dumbfounded. Although he knows that metal experts have extraordinary fighting power, he did not expect it to be so extraordinary.

That combat power ten, temporarily ranked as the first humanoid monster, hard work, what kind of success?

Let the company driver pick up the plane at the airport, Ye Qing took the second product renderings that had been completed by himself, and discussed with the masters the mass production line equipment.

The sales volume of mechanical engineering chairs, the domestic share fell back is very obvious, and now the daily sales volume is only one hundred units. Fortunately, the sales volume in foreign countries has steadily increased, just to make up the domestic drop.

There is still enough stock in the warehouse, and Ye Qing is ready to suspend the production of mechanical engineering chairs and free up monsters to produce new products.

The second product is a high-tech product improved by Ye Qing based on strong ionized sewage treatment water equipment.

The most obvious change between the two is the frequency, the power of the strong ionization sewage treatment equipment is amazing, and the sewage within two kilometers can be evolved.

Today's products use low-penetration, high-ionization work.

This way of working is naturally not to evolve sewage.

The manufacturing process of the ionization generator is different depending on the mode of operation. This time, Ye Qing uses copper-silver alloy to make coils, and the shell does not need expensive powder metallurgy technology.

Instead, an injection molding machine is used for injection molding, and a synthetic plastic made by a special process is injected into the mold.

If you want to make your products more intimate, the natural price cannot be set too high.

Of course, the production cost of the product should be as low as possible.

The injection molding machine has no difficulty, a constant temperature storage tank and a pressurized injection system. Mainly looking at the mold, the higher the precision of the mold, the more expensive the injection molded parts formed at one time.

Ask the precision of mold manufacturing, who can surpass the behemoth heavy work?

A total of six injection molding machines were produced, each with a set of mold plates that could produce twelve products at the same time.

When the masters and Ye Qing discussed the production line, the six injection molding machines over there have already started the production of the outer casing.

The synthetic plastic fluid heated by high temperature is blown into the mold through high pressure. After ten seconds, the synthetic plastic is cooled, and the mold is automatically opened. The automatic clamp for taking the material is taken out and the synthetic plastic parts are taken out, and the layer is placed on the metal table.

Elegant black, rose gold, matte silver.

Available in three colors, organic minerals are added directly to the synthetic plastic to color. It also adds an antioxidant that allows the shell to be used for ten years without aging.

The coil of the ionization generator was fabricated. After discussion, Ye Qing decided to adopt a very innovative and very daring mass production method.

Handmade!

The coil of the ionization generator is extremely complicated, and it is not a conventional motor stator winding structure. It is an asymmetric polygon, only the size of the palm.

If you use an automatic winding machine, even if you are a master, you have to scratch your head. In the end, you can only design three machines according to different steps.

Wasting time and increasing the electricity bill.

But with pure manual winding, you can get it in one step.

The manual mass production method, which sounds incredible. Handcraft has always been synonymous with backwardness and low efficiency, an electric looms, a day's workload, equivalent to two hundred times the speed of hand-woven.

In the modern industry, Huaxia struggled hard and hard for decades, and finally upgraded the industrial chain to the level of mechanical automation.

Now, the behemoth heavy work has to go back, use manual, but also mass production?

It sounds like a fairy tale, but it is possible in the behemoth heavy work.

Because Behem Heavy Industries has just created a robot prototype, because hand-made is not done by people, but a robot that is more flexible than human hands.

Just give the robot a set of correct electrical signal control commands just like a machine tool. It completely mimics the human hands and quickly bypasses the most standard ionization generator coils.

How fast is the robot's hand speed?

After the reinforcement of the materials and the motor, the robot can open the horsepower and it takes only one minute to complete the coil that the ordinary person needs to take a day to get out.

There are no problems with this one hundred units, and Ye Qing has to praise his wit...

Busy and day and night, for the new product design production line, has been busy for four days. Fortunately, the production of robots, only need to slightly change the production line of mechanical engineering chairs.

On the fourth day, the company went to Dongguang City Co., Ltd., and the employees of the company who purchased the production line returned to Zhongyun by train.

They also brought back two sets of magnetic induction lines and a digital processing system that was reprogrammed according to Ye Qing's requirements.

Usually, the technicians need to be busy for a week or two before they can assemble and debug the production line. It is only a day for the monsters to install.

No need to debug, the material can be directly produced after it is in place.

The two sets of production lines are in place, indicating that the second product can finally enter the mass production and stocking status.

After the staff did not test day and night, according to the feedback report, the change was changed back and forth more than 50 times, and the name of the light was replaced by the third generation robot of the prototype.

Also follow the stereotype, enter the mass production state.

Robots are used in two applications, industrial robots, and home robots.

...

...