My Empire War Game

Hathaway put down the silver-white carving knife, and then moved her body, the towering part of her chest outlined an astonishing arc. Most of the equipment for the clay golem production line has basically been completed, leaving only the equipment for engraving runes unfinished.

This equipment needs to use a tower spirit structure made of a legendary soul spar to operate, but if it is only used to produce clay golems, it is a bit wasteful, so Su Lun intends to use the magic pattern inscription technology of rock golems Also enter it.

At that time, as long as other equipment catches up, this equipment can be used to produce rock golems.

In addition to the legendary tower spirit, this machine also needs to use a lot of rare materials. Su Lun and Hathaway finally made this device after spending a lot of effort.

In the end, as long as the tower spirit structure was installed, Hathaway picked up the staff, and a burst of obscure spells were quickly read out. The surrounding elemental energy began to fluctuate strongly, and soon a dazzling aura appeared. , a powerful wave of elements descended here.

"Legendary Activated Constructed Life!"

Strange elemental energy gushed out from Hathaway's body quickly, and the powerful magic power instantly enveloped the legendary soul spar in front of him, and soon a wave of other energy fluctuations appeared in the room.

"Soul Weaving! (Super Magic Technique + Magic Power Shaping + Soul Construction)"

A trace of soul power is changing rapidly under Hathaway's operation. The spell of soul weaving is very difficult. This is the key to making a legendary tower spirit. It is equivalent to shaping the personality and building a framework for the tower spirit. According to his Ideas to make taring.

Usually, the tower spirits made by wizards are extremely calm and rational, but it does not hinder some people's personal hobbies, making a funny tower spirit. Hathaway, who already had production experience, moved very quickly this time. After about ten minutes, although a rune was constructed.

With a flash of inspiration, the construction of this legendary tower spirit was completely completed.

The next step is to install the legendary tower spirit construct and the rune inscription equipment together. This difficulty is not high. After placing the legendary tower spirit in the heart of this equipment, the automatic magic pattern inscription instrument is completed. .

[Automatic magic pattern engraving instrument: Legendary construction, can engrave the required magic patterns on objects according to requirements, accuracy +25, efficiency +35, indestructibility +30, logic operation +32, failure reduction +33. 】

After seeing the properties of the magic pattern inscription instrument, Su Lun nodded in satisfaction. With this thing, his clay golem production line is considered complete.

Without taking a break, Hathaway and Su Lun returned to the secret realm with the automatic magic pattern engraving instrument. At this time, the production line of clay golems in the secret realm had been roughly completed. After Hathaway installed the device, she directly connected to the energy and turned it on.

Although I am very confident in my work, I still debug it. The light blue elemental energy entered the golem factory through the energy channel, and the whole golem factory began to start slowly. Several clay golems serving as workers woke up from standby, ready to work.

"Taling, Builder One is activated!"

"System self-test in progress!."

"System self-test completed!"

"Start loading the program!"

"Loading progress 20%, 40%, 60%, 80%, 100%!"

"Loading completed!"

"Controlling the fully automatic production line of clay golem type 3!"

"The connection is complete!"

The clay golems that were standing quietly waiting for the notification started to move in an instant! Tower Spirit: Builder No. 1 is the name of the legendary tower spirit on the automatic magic pattern engraving instrument, and this legendary tower spirit is also the brain of the entire clay golem production line. This fully automatic production line began to operate normally under its operation.

"Start the clay golem production line!"

Following Su Lun's order, the clay golem production line started instantly!

Several clay golems started to operate the machine, and a cart of clay was sent to the pulverizer for crushing. The clay was not finished until it became very fine like flour, and then the pulverized clay was sent to the mixer for further processing. Stir. While stirring, magic essential oil, elemental dust and other materials will be added, and finally the evenly stirred clay will be sent to a molding machine to be made into a standard clay golem structure.

After a series of processes, these parts were sent to the magic pattern engraving workshop, and the magic pattern was inscribed by the automatic magic pattern engraving machine. Hathaway and Su Lun looked at the part of the clay golem around their eyes with serious expressions, and a bright ray lit up.

The one that emitted this ray was Hathaway's secondary eye that had been treated before. I saw that the ray was a little thick when it first appeared, but it began to shrink immediately. On the measuring platform next to it, the instrument was accurately measuring beam data.

If the data does not meet the requirements, the production will be rejected, and the beam straightener next to it is used to correct this place. Next to the beholder's secondary eye, there is also an energy controller, which controls the power of the light beam.

Under the control of Taling Builder 1, the light beam soon reached the product requirements. Then start the magic pattern inscription. The arcane dust and gem powder that have been prepared for a long time began to be cast. As the light beam traveled quickly on the part, a precise magic pattern appeared on that part.

After some adjustments, the speed of the magic pattern engraving instrument became faster and faster. It only took three minutes to complete the magic pattern inscription on one part. Hathaway picked up the produced parts and inspected them. The parts of this clay golem are almost exactly the same as those she designed. Although they are not as sophisticated as the ones she personally made, they are already considered good products.

This automatic magic pattern engraving instrument can engrave magic patterns on six parts at a time, and of course, it can also let six beam rays cooperate to engrave one piece.

With the operation of the golem production line, a clay golem was soon produced. After walking around the clay golem, Su Lun found that it was no different from a normal golem.

After seeing the successful production of a golem, Hathaway and Su Lun felt relieved. The golem production line was finally completed.

"Constructor One!"

"I'm here, master!" Tarling's cold mechanical voice sounded.

"Suspend production! Let those clay golems come over and stand up!" Hathaway pointed to the working clay golems and said.

"Obey!"

Soon several clay golems were neatly arranged in front of Hathaway.

Hathaway took out a silver-white carving knife. These clay golems were different from the ones just produced, and some of the craftsmanship of the golem production line was loaded on them. However, during the operation just now, these modified clay golems There were a few hiccups, and now Hathaway needs to fix them.

The main work of the transformation is on the palm.

Hathaway used a carving knife to repair them with more dexterous hands. At the same time, new runes were engraved on the finger joints and wrist joints. This can strengthen the flexibility of the hands of the clay golem, and the golem for battle does not need it. This kind of precision modification is only needed for this auxiliary type, and the consumption of this modification alone is enough to make another clay golem.

Although auxiliary golem puppets are not good at fighting, their cost is usually much higher than combat golem puppets!

Auxiliary golems need to be imbued with more professional knowledge. Only with this knowledge can they perform various tasks according to the situation on the spot. Their palms are very flexible, and only in this way can they perform various tasks.

After completing the operation of the clay golem production line, the next step is to officially install the production line. At the same time, the factory building also needs to be built. Su Lun deliberately opened up a space of about 1,800 square meters, and then followed the previous life. A clay golem production workshop was built in the style of a factory building.

The production of clay golems can be roughly divided into three parts. The first part is to build the limbs. This step can be disassembled to complete. This part is directly made by a molding machine. The difficulty is not high, even if it is a wizard apprentice. It can also be done. The second step is to perform various treatments to give these clay parts a shape and make them less prone to damage. Only after this magical treatment can the clay golem continue to be produced.

Otherwise, the clay golem can only be clay, and a piece of it can be knocked out with just a stick. It is impossible to fight or work at all. Only after these demonization treatments will the clay become as hard as a rock.

The third step is the most critical magic pattern inscription. Only after the magic pattern inscription is completed, can this golem perform various actions as if it has life. Of course, the premise is that it has energy.

The fourth step is to assemble the body structure. This step is like stitching together a toy model to assemble the complete structure of the golem. The assembly workshop has the most clay golems. In fact, it is still a repair workshop, where damaged clay golems will be replaced with parts.

The benefits of the standardization of parts proposed by Su Lun have been fully reflected here. If any part is damaged, just remove it and replace it with a new one. As long as the damage is not too serious, or the soul core is destroyed, basically these magic Like maintenance problems can be solved.

The last part is the activation of spellcasting. This part has not been automated for the time being. In fact, this step can be activated through the tower spirit. Input the activation spell inside the tower spirit, and use the magic power of the element pool to complete the activation of the golem.

It's just because the value of the clay golem is not high, Hathaway and Su Lun don't want to add another tower spirit. You must know that the cost of such a tower spirit is about one million Jinnar, and Su Lun still has a lot of money. If you want to build other golem production lines, you need to spend a lot of legendary soul crystals to make tower spirits. Naturally, you don't want to invest too much in this production line.

In fact, activating the clay golem only requires those high-level wizards to come and cast a spell every once in a while.