My Pet is a Snapping Turtle

It's just that the arms can't twist the thighs.

Feng Xuesong is the director of the workshop, the head of the workshop. Although he, Fan Gaoyi, is a senior technician, he still dare not do anything, so he can only honestly arrange a test knife.

The test knife has begun.

Seeing that the tools that Han Guang and the others brought over, whether they were drill bits or milling cutter blades, were all black and shiny, he was slightly surprised.

But it was just a little surprised, without further questioning, guessing that this might be a new product of Taishan Alloy Cutting Tool Group.

He thought in his heart, so what about the new product, it must not be comparable to Shante's knives.

After some preparations, the knife test began.

The parts processed are the same as those processed by the CNC center next to it.

The processed parts are the same, the two CNC machine tools are of the same model, and the CNC machining programs used are also the same.

Get ready, let's try the knife!

When the CNC machining center started to work, everyone was quiet. After about 20 to 30 minutes, the first part was processed.

The CNC machining center stopped, and the workers who operated the machining center immediately inspected it.

First look at each tool, whether it is a drill bit or a milling cutter, there is no problem with the visual inspection, and then take a measuring tool to measure the workpiece, and then said loudly.

"Director Feng, Mr. Fan, there is nothing wrong with the tool, and the parts are processed properly."

What!

No problem at all?

Fan Gong looked at it carefully, and seeing that there was really no problem, he couldn't help but looked puzzled, and looked at Han Guangdu and the others suspiciously, his eyes seemed to say, this is impossible.

However, just the processing of the first part may not explain anything. Fan Gaoyi didn't say anything, but he was a little suspicious in his heart.

Feng Xuesong is an expert in the field of processing. He was the technical director of the workshop before and has deep knowledge in mechanical processing technology.

He also looked at the processed parts and the tool himself, and nodded slightly.

He specially picked up the processed iron filings and looked at them, thoughtfully, and nodded slightly.

An experienced technician can often see some clues from the processed iron filings.

Continue processing.

The worker installed the second part, finished the tool setting, and Han Guang stopped when he was about to process.

"Director Feng, I looked at the processing parameters. The speed is low. The speed of drilling and milling is only 500 rpm. I suggest increasing it to 1500 rpm or higher.

What!

Fan Gaoyi was about to express his objection, and was about to say loudly, do you understand mechanical processing, this is a high-temperature alloy, a typical difficult-to-machine material, and the speed of 1500 rpm is used, what is the concept!

But before he could speak, Feng Xuesong raised his hand to interrupt.

Feng Xuesong said, "Mr. Han, you are so confident in your knives that you really use 1500 rpm."

"I think I can give it a try. I don't think there is any problem with the speed of 1500 rpm." Han Guang looked very confident.

Feng Xuesong just hesitated for a while, then nodded and said, "That's ok, increase the speed to 1500 rpm, let's try it."

Fan Gaoyi: "."

He still didn't say anything, because Feng Xuesong interrupted him again. Just now, Feng Xuesong looked at the condition of the knives and the condition of the iron filings, and felt that it should be ok to try the speed of 1500 rpm.

The machining NC program was modified immediately, and the drilling and milling speed was increased to 1500 rpm.

Press the start button and processing starts again!

This time the processing speed was much faster. It took 20 minutes to process the first part, but this time it took only seven or eight minutes, which was only about one-third of the time for the first part.

Finished!

The processing center stopped, the protective door opened, and everyone rushed over to take a closer look.

"Huh!"

Feng Xuesong was slightly surprised, "Mr. Han, your knives haven't changed at all, and you don't see any wear and tear."

Two parts are processed continuously, and it is a typical difficult-to-machine material, and the speed of 1500 rpm is also used. Generally, the cutting tool should be changed.

Han Guang also looked at the condition of the cutting tool and the condition of the processed parts.

These knives really can't see the slightest change, let alone a trace of wear.

Immediately, his heart was shocked. Experience told him that this batch of knives made of black alloy was unusual.

After his confidence increased, Han Guang suggested, "Director Feng, increase the processing speed to 3000 rpm."

Feng Xuesong said, "Yes, let's try the processing speed of 3000 rpm."

After some preparations, the third part processing started.

With a processing speed of 3,000 rpm, parts that originally took 20 to 30 minutes were processed in only three to four minutes.

"Oh my God!"

"Look at it, the appearance of the processed parts is still very beautiful. It is unbelievable that this set of tools is not worn at all."

"Amazing, the knives really don't show any wear."

"."

The whole scene cheered up, everyone was in high spirits, only Fan Gaoyi didn't speak, his face was sombre, and there was only one thought in his mind, this is unscientific!

Fourth part, sixth part, seventh part.

With a processing speed of 3000 rpm, the processing efficiency has been improved several times, and a part can be processed every three or four minutes.

Every time a part is processed, there is cheering beside the machining center, and more and more people are watching. Some workers and technicians specially ran over after hearing the news.

Such a big movement quickly aroused the idea of ​​the people from Shante Company not far away.

They are confused!

This is how the same thing?

Just try a knife, why is there so much movement on the side of Taishan Knives, each one seems to be on a stimulant, one of Shante's skills quietly came over.

After watching it for a few minutes, he looked horrified and said in his heart that this was not true.

For Nima, one part can be processed in three or four minutes. The key is that the set of tools provided by Taishan Group has processed more than a dozen parts without grinding and without any wear and tear.

This is not scientific!

God, how could there be such alloy knives in the world, this is really unscientific!

After being stunned for a long time, he finally came back to his senses, and returned to their processing center in a depressed mood, with a bit of bitterness on his face.

At this time, one of their parts was processed, and the same part took a full 20 minutes.

Knowing that the Taishan Group can process a part in three or four minutes, he shook his head helplessly.

Shante's knives are obviously worn, and the fourth part has been processed, and all the knives need to be removed for grinding or replacement of alloy blades.

"Old Chen, what's wrong with you?"

Someone noticed his expression, and someone asked inexplicably.

………

The second one is delivered!