Rebirth 1999: Opening the Age of Black Technology

Reporter Li is also an experienced reporter, and all the clues are spliced ​​together in his mind—

Chen Xiao designed the main board that can replace the German Demagi five-axis machine tool, and found Delong company to produce it and installed it on the CNC beds of Jiangcheng Machinery Factory. The machine tool runs perfectly.

Li Feng wrote a news report about Chen Xiao himself, but was rejected by the editor-in-chief.

The last report only mentioned that Jiangcheng Machinery Factory dares to innovate, which is helpful to the development of Xiaguo CNC machine tool industry.

Li Feng didn't pay attention to what happened later, he just felt a little pity he didn't report on Chen Xiao.

Until today, Li Feng did not know that the technology of the batch of new motherboards from Jiangcheng Machinery Factory had been sent to Zhongjing Company.

Zhongjing Company used this technology, coupled with the chips and blades purchased from outside, to produce a domestic version of CNC machine tools.

The price of domestic CNC machine tools is of course much lower than that of overseas ones. Therefore, Zhongjing Company stands out from domestic equipment companies at once, has a large number of customers, and has a large number of orders in a period of time.

But I didn't expect that the motherboard design of Zhongjing Company seemed to be defective, which caused so many factories that purchased CNC machine tools to have problems at the same time.

Li Feng immediately grasped the key points of the news.

How did the technology invented by Chen Xiao become the intellectual property of Zhongjing?

Bought it with money?

Apart from the problem with the equipment now, what is the reason for Chen Xiao's design besides the problem?

After the interview here, Li Feng hurried to contact Delong, which produced the first batch of motherboards, to find out.

The people in charge of the factory are very emotional. After all, the losses are real, and the factories with relatively thin foundations may not be able to withstand this wave.

President Yao Yao Lin said: "I suggest that everyone go back and see if they strictly follow the operating requirements of the CNC machine tools. How can there be problems with the newly produced CNC machine tools. And there is no problem with the test machine when you buy it!"

Yao Lin was already sweating profusely, and he continued to refute Zhongjing.

What happened here has been reported to the leaders, and some actions have been taken. The reporters should be greeted first, not to report indiscriminately, and other things will be discussed when the leaders come.

President Li of the National Construction Company roared: "Yao Lin, what you are talking about is bullshit! They are all domestic equipment, with the same performance and functions. I bought one from Linghua, which is tens of thousands more expensive than yours. , running 24 hours a day, nothing happened!

You, Mr. Su, said that Zhongjing's equipment is better than Adlink's, it has patents and after-sales services, and the price is still cheaper, so I just bought it! Now all of Zhongjing's production has problems, and the one that ADLINK purchased is still running! "

"They were all purchased at about the same time, why is Linghua's alright, and Zhongjing's has an accident?"

When Mr. Li said this, many people remembered it.

During this period of time, the production and sales of domestic precision equipment were a little weird. ADLINK and Zhongjing launched domestic CNC machine tools at almost the same time, and the CNC machine tools are all the same model. What is going on?

At this moment, Su Desheng received two calls.

One was from his immediate boss, Zhang Biao.

Zhang Biao scolded Su Desheng immediately, "All the equipment sold is about the motherboard. I just asked Jiangcheng Machinery Factory, and the motherboard there was also burned! Su Desheng, what the **** is going on!"

Zhang Biao: "The products sold this time involve millions. If something goes wrong, you will pay for it with your life!"

Another is a call from Yanjing.

"Hey, is it Su Qiao's father? I'm sorry to disturb you, we are from the patent review expert group of the State Intellectual Property Office, because the patent applicant Su Qiao left your phone number, so we called. ."

"The purpose of our call this time is to get in touch with the patent applicant and Jiangcheng Machinery Factory to actually check the application of the patented product."

"We heard that Zhongjing Company has put the patent into practice and started production and sales. We will learn about it tomorrow."

Su Desheng swallowed and almost fainted.

…

Chen Xiao, who came home from school, put a bowl full of white rice in the bowl, and in front of him was his favorite hot pepper.

Jiangcheng's hot peppers are quite famous, and almost every household can do it.

Eat this in winter, not only to eat but also to keep out the cold.

Chen Xiaofeng Can Yunjuan cooked a bowl of rice, and went to serve another bowl.

Lin Hui put the stewed ribs in Chen Xiao's bowl and said, "Don't eat all spicy food, just eat more meat."

Chen Xiao nodded hurriedly when the phone rang.

Lin Hui went to answer the phone, "I'm looking for you."

Chen Xiao wiped his mouth and just picked up the phone when Zhou Linghua's hearty laughter came from the other end of the phone.

"Hahaha! Brother Chen! What you expected is not wrong, son of a bitch, Zhongjing is stealing technology!"

Zhou Linghua said excitedly: "Now there is a problem with Zhongjing Company! Many CNC machine tools purchased by customers have burned the motherboard after high-intensity work. This incident has caused a stir in Jiangzhou! "

"Now the heads of seven or eight factories are crowding around the door of Zhongjing Company, asking Zhongjing Company to give an explanation! If Zhongjing doesn't agree, they will go to the government!"

During this period of time, the CNC machine tools of Linghua Equipment Factory did not stop production under Chen Xiao's suggestion, but very few were sold.

Some time ago, Zhou Linghua had trouble sleeping and eating, and he doubted for many times whether his cooperation with Chen Xiao was correct.

But after seeing the visual operating system developed by Chen Xiao, he convinced himself countless times that this young man was still somewhat competent.

it's good now! All were as Chen Xiao expected.

There was a serious problem with the equipment of Zhongjing Company, and as a result, orders for ADLINK equipment surged! The order has now reached the middle of the year. UU reading www.uukanshu.com

For those users who have already purchased Zhongjing CNC machine tools, it is cost-effective to repurchase ADLINK's equipment even if Zhongjing's equipment fails.

After all, the price of foreign equipment is several times that of ADLINK and Zhongjing equipment.

Many users who were squeezed by product orders rushed to Zhou Linghua to buy equipment, hoping to resume production as soon as possible.

If the order time is delayed, this loss is really big.

Zhou Linghua said: "Xiaozi, I am going to contact Delong's side and start trying to produce CNC machine tools with a visual operating system. The number that brother promised you will never change! When you finish the college entrance examination, brother will give you a package. A big red envelope!"

According to this momentum, Zhou Linghua is confident that this year's sales will surge! The size of the company will also go to another level.

However, Chen Xiao knows that the motherboard is only one of the core technologies. The key technologies such as chips and blades are in the hands of overseas companies, and Xia Guo's CNC machine tools are still unable to develop on a large scale.

ADLINK's development has an upper limit, and it will even be strangled by overseas capital.

However, Ling Hua's actions are also good for Xia Guo Industry.

When overseas companies like Demagie know that the equipment assembled and produced in Xiaguo will be so cheap, they will definitely think of the equipment to build a production base in Xiaguo, and the price of high-quality CNC machine tools will also be greatly reduced.

Chen Xiao was also very happy: "Congratulations, President Zhou."

Zhou Linghua hurriedly said: "What is Mr. Zhou who is not Mr. Zhou, so out of the way, just call me Brother Hua. By the way, Xiaozi, you don't have a mobile phone now, it's too troublesome for me to contact you, I've already asked someone to buy one for you. If you have a mobile phone, it will be delivered to school tomorrow for you."