Rebirth 99 to become a car giant

Although Cao Yang has a complete set of nut plate and bolt nut technology in mind, it is obviously impossible for him to be responsible for the design process, mold and other content of each customer's such parts in the future.

Therefore, it is very important to train the technicians and R\u0026D personnel of Nanshan Auto Parts Factory.

In this day and age, it is very difficult to find undergraduates in small private factories.

This obviously cannot satisfy Cao Yang's plan.

Thinking of yesterday when she was taking a walk with her mother after dinner, she asked herself if she had considered going back to school to continue her studies. Cao Yang thought she could consider recruiting some college students.

Shares or something is naturally impossible.

No one can come.

But the wages are still quite competitive.

After all, the profit margin of Nanshan Auto Parts Factory is relatively high, and it is no problem to support a few college students.

Action is worse than excitement, so he immediately asked someone from the Human Resources and General Affairs Department to contact him to catch up with the recent job fair held by his alma mater.

These days, campus job fairs are not as exaggerated as later generations. A bunch of companies started various presentations in September and October, and basically began to come to an end in November and December.

For graduates of this era, most of the time they start looking for jobs in December, or even in the second half of their senior year.

So Nanshan Auto Parts Factory is not too far behind.

However, when Cao Yang and Zeng Tingting sat in front of their recruitment desks and watched the crowds of other companies collecting their resumes, they felt a little complicated.

Especially the booth of Yangcheng Procter \u0026 Gamble is more than ten meters away. That scene...

"Factory manager, college students nowadays like to go to foreign companies. I just took a look at Procter \u0026 Gamble. They advertise that the annual salary can reach 50,000 in the first year. Who can compare with it?"

Zeng Tingting walked around the venue a little disappointed, complaining to Cao Yang there.

"Those college students walked by our booth, and many of them left without even taking a second look. No one is willing to come."

"Director, your classmates should be seniors too, right? Why don't you contact them directly to see if anyone is willing to come to our factory?"

Zeng Tingting felt that if she wanted to recruit college students at Lingnan University of Technology, it would be impossible to rely on normal methods.

The vision of college students is high, and Lingnan University of Technology is one of the best schools in Yangcheng, and it is even one of the best schools in South China. Naturally, there is no need to worry about finding a job.

Although it has experienced the first expansion of enrollment, the number of college students has just reached 1 million. Compared with the situation where a zero is added, employment is not a problem at all.

"After leaving the school, I haven't had any contact with you. According to my understanding, more than one-third of those students have gone abroad, one-third are studying in graduate school, and the few remaining in a class are looking for jobs. It's gone."

"Even if they are not found, they probably won't come to our factory."

Cao Yang knew a little about his classmates.

Sudden suspension of school, basically in a state of disconnection.

After all, this is not the age when everyone has a mobile phone.

The most important thing is that when Cao Yang was in school, except for a few people in the same dormitory, the relationship with other classmates was relatively normal.

The reason may be that he only concentrates on studying, or it may be because he is so handsome that he always attracts the attention of a few girls, so his male popularity is naturally not good.

"No wonder no one has come up to say hello to you in this job fair. It seems that basically none of your classmates have come."

Zeng Tingting's judgment is obviously quite accurate.

Although the job fair was held at Lingnan University of Technology, most of the people who came were from other nearby universities.

Graduates of Lingnan University of Technology seldom need to go through this type of job fair to find a job.

"May I ask if you are recruiting people majoring in material forming and control engineering?"

While Zeng Tingting was talking with Cao Yang, a thin student with thick glasses came over.

"Recruitment! Of course we are. Our factory has its own mold center, and we just need talents in this area."

It was the first time that Cao Yang took the initiative to ask in school, regardless of the level of the other party, he actively talked with the other party.

There is no way, the current college students are precious, and they don’t need to take off their long gowns or put down their airs to find a good job.

It's not like twenty years later...

"Director Cao, I haven't passed CET-4, does it matter?"

After chatting for a while, the two sides had a little understanding.

And this student named He Qingquan was obviously very interested in Nanshan Auto Parts Factory.

"It doesn't matter, we don't have strict requirements for English."

"I also failed my college English course. I may not be able to get a degree certificate. Does it matter?" He Qingquan said again, "But don't worry, my professional English is still good, and the basic English technical requirements can be understood. .”

"It's okay, if you have any worries, you can tell them."

Cao Yang gradually became a little clearer. It seemed that He Qingquan must have hit a wall elsewhere, so he came to his side.

Sure enough, normal college students still look down on Nanshan Auto Parts Factory.

"I'm only interested in mold design and related knowledge, and I'm not interested in other things. So Ma Zhe, sports, ideological and political and other subjects have failed..."

When He Qingquan said this, his voice became significantly lower.

Obviously, this is a student with a relatively obvious partiality.

"What do you think about PRG molds?"

Cao Yang is going to get to know the other party well. If there is potential, it is not impossible to recruit and focus on training.

He Qingquan, who was originally slovenly and looked a bit sloppy, immediately changed his eyes after hearing Cao Yang's question, and his whole person seemed to be reborn.

"Director Cao, the PRG stamping die is a high-precision die for metal stamping. It has high precision and high durability, and can manufacture metal products of various shapes and sizes. It has a wide range of applications, involving automobiles. , electronics, aviation, medical and other fields, of course, there are mainly applications in this area abroad, and there are very few domestic applications."

"PRG stamping dies have the following advantages. The first is high precision. The processing precision of PRG stamping dies is very high, and it can produce metal products with relatively precise shapes and sizes, which greatly improves product quality and work efficiency."

"The second is good durability. Since the PRG stamping die is made of high-quality materials, it has high durability and bending resistance, and the stability of being able to withstand complex processing is very good. At the same time, it can increase the service life and reduce maintenance costs. "

"The third is easy maintenance and replacement. The design and manufacture of PRG stamping dies are convenient and easy, and can be maintained and replaced quickly. It can adapt to the needs of product upgrades or market changes more quickly, and can also greatly improve economic benefits. "

"The fourth is high production efficiency: PRG stamping dies have high manufacturing precision and high efficiency, and are suitable for mass production, which can speed up production and reduce production costs."

"Although the cost of PRG molds is relatively high and the design difficulty is relatively high, it is far behind the widespread use of TDM molds in China, but I think that in the next ten or twenty years, PRG molds will definitely be used on a large scale. various industries."

Although what He Qingquan said was a bit general in Cao Yang's opinion, it is already very good for a senior student to be able to do this.

After all, there is still very little domestic understanding of PRG molds.

"How about this, student He Qingquan, you probably don't know much about our Nanshan Auto Parts Factory, why don't you come to visit us directly, and then you can come to the factory for an internship in the next month, if both parties feel suitable, Then we will sign the Tripartite Employment Agreement, what do you think?"

Cao Yang's proposal was exactly what He Qingquan wanted.

Then, the two of them simply left the job fair, leaving Zeng Tingting stunned by the side.