reborn industrial empire

Chapter 570: The Progress of Huayang Seiko

Please subscribe, please vote!

"Haha, is that right? That's good! But while we are keeping pace with the progress, we must also ensure quality. These supercars are the top priority of our work at Huayang Power this year, but there is absolutely no room for error. This can

It is related to our Huayang Power and our future reputation in the automotive field, and we must not make any mistakes."

Jin Xiaoqiang warned them again.

"Hey! Xiaoqiang, when did you become so wordy? Can we not know the importance of these cars? Look at me, for data testing, I haven't been home for several weeks!"

Liu Xiaoliang, who was standing next to Liu Changshan, was full of confidence and said nonchalantly.

"Your virtue is entirely because you are lazy. Don't we have a bathroom in the laboratory? Don't we have a good rest room?"

Jin Xiaoqiang said sarcastically that his old friend had arrived. To be honest, he had been too busy since the establishment of Huayang Dynamics, and it had been a long time since he had a good communication with his old friend.

And Liu Xiaoliang was never a weak-spoken person. Jin Xiaoqiang was so sarcastic about himself, and Jin Xiaoqiang immediately raised his hand. Liu Changshan, Liu Hong, and several other engineers also looked at him with smiles.

Xiaoqiang and Liu Xiaoliang play tricks.

After all, after spending so many days in the company, focusing on the research and development of this project, everyone is a little tired.

Jin Xiaoqiang and Liu Xiaoliang played tricks for a while, and it happened to be noon. Jin Xiaoqiang simply stopped leaving and had lunch in the canteen of the Special Vehicle Research Institute, and then discussed these issues with several engineers.

After learning the development details of this supercar, he left the Special Vehicle Research Institute.

After leaving the Special Vehicle Research Institute, Jin Xiaoqiang went straight to the headquarters of Huayang Power and Huayang Precision on the other side.

At present, Huayang Precision has become the most popular equipment manufacturing company in China. Although it is still small compared with those foreign equipment manufacturing giants, it has become a large company with a well-established status in China.

Every day, various finished engines, engine parts, and transmissions produced from this factory are sent to automobile manufacturing companies across the country.

Another major specialty product of theirs is the machine tool tools they produce. At present, the machine tool tool products produced by Huayang Precision have not only occupied most of the market nationwide.

Some of them have even been exported and have quietly opened up markets in Europe, America and Japan.

Although Europeans and Japanese have always been proud of machine tools, they still don't have much resistance to the high-quality and low-priced cutting tools produced by Huayang Seiko.

After all, this era is the era of globalization they advocate, and the global division of labor is becoming more and more clear. Although they are not far away from China's manufacturing to encroach on their traditional fields, but in the face of low-price, high-quality China-made machine tools,

They still did not hesitate to abandon some domestically produced products.

After all, the quality is similar, but the price is very different, so of course they will choose Huayang Seiko's products in order to reduce costs.

Moreover, Huayang Precision has frequently cooperated with the machine tool research institute led by Binxinwei recently. Through the technology derived from Binxinwei's machine tool research institute, they have also begun to get involved in the field of machine tool manufacturing.

They can already produce some less important parts by themselves, such as machine tool beds, robotic arms, and cutting tools, etc., but in key parts, such as ball screw bearings, CNC parts, and AC servo motors, etc.

Parts still have to be purchased from foreign countries.

But even so, the CNC machine tools they produce and assemble have quietly occupied a certain market share in the domestic market.

For those machining companies that do not have particularly high requirements for machining accuracy and do not have too strict requirements for machined parts, the machine tools produced by Huayang Precision are synonymous with high quality and low price.

Compared with the two major domestic machine tool factories, Huayang Seiko's machine tools are not high in price, but their performance is not bad, and their workmanship is exquisite, especially in terms of appearance and configuration. Although they are not as good as those of the internationally leading large machine tool companies

There is still a certain gap in the products, but compared with the products of the two large state-owned enterprises in China, there has been great progress.

This has also allowed Huayang Precision's machine tools to quietly become popular in the domestic market. Some private companies in the south and small machining companies like Huayang Precision's machine tools and machining centers very much, and they often become mature ones.

People come to them in droves to place orders.

Since Huayang Precision started producing machine tools in the second half of last year, the sales volume of their machine tools in the market has not exceeded 100 units every month.

In the past six months alone, Huayang Precision has created a profit of no less than one billion for Huayang Precision just by selling machine tools. This not only makes Huayang Precision’s boss Zhu Junxi ecstatic, but also really makes Jin Jin.

Xiaoqiang was taken aback.

After inspecting Huayang Precision's factory, Jin Xiaoqiang and Zhu Junxi held a meeting. During this intermittent meeting, the two parties partly discussed the future of Huayang Precision, and on the other hand,

Jin Xiaoqiang also assigned Zhu Junxi a five-year mission.

His request is to strive for the machine tools produced by Huayang Precision to be marketed throughout the country in five years. Of course, this is also a preliminary plan. As for whether this plan can be finalized in the future, it depends on Binxin WeChat.

The research progress of the machine tool research institute led by.

After coming out of Huayang Precision Industry, Jin Xiaoqiang drove straight to the Machine Tool Research Institute within the Academy of Sciences at the headquarters of Huayang Power.

Since visiting here last year and having several conversations with Zhang Hainan, Jin Xiaoqiang has really not had time to come here again in the past few months.

After receiving the notice, Zhang Hainan had already been waiting for Jin Xiaoqiang inside the Machine Tool Research Institute. When he saw Jin Xiaoqiang's car arriving in front of the Machine Tool Research Institute, he hurriedly greeted him.

After the two exchanged pleasantries at the door of the Machine Tool Research Institute, they entered the interior of the Machine Tool Research Institute building under the leadership of Zhang Hainan.

The hall is the same as last time. There are several dismantled machine tools. Then there are many apprentices and engineers surrounding those sets of machine tools, repeatedly carrying out the disassembly and assembly process.

Research and copy.

In a studio in the far corner of the hall, there is a large X-ray machine. This is a large X-ray machine bought by Binxin Weili after Jin Xiaoqiang allocated funds to the Machine Tool Research Institute last year.

Optomechanical.

The main job of this X-ray machine is to perform perspective scans on machine tools that are inconvenient to disassemble, and then obtain key data on some parts and components inside, as well as their structural composition.

What is lying under this X-ray machine now is the internal parts of a robotic arm of a machining center purchased from Germany. Over the past year, not only Jin Xiaoqiang has been continuously funding this machine tool research institute

, and Huayang Seiko, which has tasted the benefits from the Machine Tool Research Institute, has also continued to allocate funds to this research institute.

The purpose of their funding is very clear, which is to enable them to maintain the enterprising spirit as now, to constantly overcome customer difficulties, and to not be afraid of spending a lot of money. The key is to be able to keep up with the cash technology of the international machine tool industry.

The institute also adheres to the attitude of not being afraid of spending money. As long as there are new models of machine tools from foreign countries, as long as they can be purchased through legal channels, they will buy them back, then dismantle them, study them, sum up their experience, and record them.

data.

Prepare for the replication and innovation work they will carry out later!

Jin Xiaoqiang felt that the money was well spent and he didn't feel bad about it.

"By the way, Engineer Zhang, is there any new progress in the research of machine tools in our Machine Tool Research Institute?"

Under the leadership of Zhang Hainan, after roughly walking around the building of the Machine Tool Research Institute, Jin Xiaoqiang asked Zhang Hainan.

Although Germany, Japan, and the United States have developed to the point where they have begun to use linear motors and non-contact hydraulic bearings in machine tools, due to cost and selling considerations, they export high-end machine tools abroad.

, generally ball screw bearings, and machine tools driven by AC servo motors.

Machine tools configured in this way are currently being widely adopted by countries around the world and are not outdated.

Especially in China, which is currently a big country in the processing industry, such machine tools currently use ball screw bearings and AC servo motors, accounting for almost 99.9% of the machine tools in China.

Therefore, machine tools like this in Tianchao are not only not outdated, but are also very popular, so Jin Xiaoqiang is currently paying most attention to the research and development of this kind of machine tools.

"Well, we have made some breakthroughs. Look, Mr. Jin, these are the balls we have produced in recent batches. They are currently used in ball screw bearings by major machine tool countries such as Japan and Germany.

The gap is no longer very big. It’s just a little bit worse than theirs in terms of stability, but as long as we continue on this path, we can definitely catch up with them..."

Zhang Hainan pointed to the two trays in front of him. The trays were filled with white and shiny balls. One tray contained products produced in Germany, and the other contained products produced by Huayang Power.

At present, judging from the appearance, the balls produced by Huayang Dynamics are really not much different from the German products...

"Good stuff..."

Jin Xiaoqiang looked at Xie Xie's shiny balls and couldn't hold back the excitement in his heart. With these balls, it can be said that China has taken another big step forward in the machine tool manufacturing industry...

!#

www.ptwxz.com