reborn industrial empire

Minister Liu's explanation seemed like he was bursting into tears. From his voice to his expression, he expressed his sadness and anger towards the misfortune of the domestic bearing industry.

Although I don’t know whether this feeling of concern for the country and the people is true or false, he did tell a considerable part of the truth. It is true that my country’s bearing industry is currently in a state of chaos within the industry. Small farmers have serious ideas and they are all swarming in everything they do. , you can’t stick to your own personality and create such a mess based solely on the enthusiasm of the industry and the leaders’ hot-headedness.

For projects with large investments and long payback cycles, all bearing companies choose to avoid them as much as possible, not to mention investing a lot of money in research and development. There are simply no people who are dedicated to research and development.

Everyone's mind is full of ideas about how to make money and what kind of bearings to make to make money.

With such a trend, how can we produce qualified bearings?

Fortunately, there is such a monster as Jin Xiaoqiang in this life. When he was concentrating on the layout and planning to start car research and development, he began to layout the research and development of special materials.

Because as someone with personal experience, he understands the importance of this special metal material to the future development of the automotive industry. If you are restricted by others in the most basic material science, no matter how good your idea is, you will not be able to do it.

Come out, so what?

Those ideas will just become castles in the air. After a short flash, they will eventually be lost to everyone. We still have to follow those gringos step by step, sitting in Handan and learning to walk.

After obtaining a large amount of special metal smelting materials and processes from Shinyuki Naruto, Jin Xiaoqiang quietly smuggled a large number of special steel smelting tools, small electronic converters, open hearth furnaces, carburizing equipment, etc. from Japan.

A lot of them were done.

Then he hired a lot of scientific researchers who liked to study technology and were willing to devote themselves to research from major metallurgical factories across the country with high salaries to form a team to study the data and improve the equipment.

At the beginning of Huayang Power, this special steel R&D center could not produce any materials. However, after Huayang Power got on the right track and was able to provide a large amount of blood transfusion to this R&D center, the development of this R&D center also started to move forward.

Fast lane.

The people of the Celestial Dynasty have always been full of wisdom and hands-on ability. The electronic converters secretly smuggled in from Japan, as well as special metal smelting equipment such as carburizing equipment, were disassembled, reassembled and dismantled by those people, and a large number of

Reverse depiction and theoretical research.

They dare to dismantle and install even the most difficult vacuum smelting furnaces and refining furnaces. You must know that these vacuum smelting furnaces and refining furnaces are indispensable for modern metallurgical technology. China has always been the leader in this project.

Is blank.

Equipment such as ten-ton vacuum smelting furnaces and refining furnaces did not become popular in many domestic special steel smelting companies until the 21st century. However, by this time, foreigners had already used fifty tons.

Or hundreds of tons of higher-end products.

After more than three years of painstaking research, these engineers finally understood all the information provided by Shinyuki Naruto and integrated and developed a set of Huayang Power's own special metal smelting equipment and processes.

At the beginning of this year, Jin Xiaoqiang directly invested 500 million in the Special Metal Smelting Center to expand the site. After a summer of expansion and re-production, the first phase of the layout was completed in early October.

And just like this, this special metal smelting center has the ability to produce one million tons per year and more than one hundred kinds of special steel. Although this production capacity of one million tons per year is easily comparable to that of large domestic steel companies.

The annual production capacity of tens of millions of tons pales in comparison.

Even compared with those medium-sized steel plants with an annual output of several million tons, it is not the same. However, as a company specializing in the production of special steel, Jin Xiaoqiang’s special metal smelting center can be said to be the only one in China.

It is currently the only private enterprise that produces the most complete range of special steel.

After the modification and reorganization is completed, the special steel produced by this special metal smelting center every year will be able to fully meet the special steel needs of Huayang Power and Huayang Seiko.

Although Huayang Power produces millions of cars every year and requires more than 10 million tons of steel, after all, except for some key parts of a car, not all other places need to use special steel, so this

The production capacity is completely sufficient, and it is even a little rich.

Because it can exactly meet Huayang Power's own needs, and Jin Xiaoqiang currently has no plans to expand the business of special steel, so when this special metal smelting center can be expanded to start the second phase of construction, it has not yet been announced.

The company's issues came up, but the madmen in the R&D center did not stop their pace. It is said that those guys are currently seizing the time to develop and integrate a new generation of special metals.

Now that Liu Yonghao is helping him connect, he obviously wants to get a share of the high-speed rail construction, which shows that he values ​​himself very much and sincerely wants to help him.

You must know that the country is spending a lot of money to build high-speed rail, and a few years later, it will pay attention to this project as a locomotive to stimulate domestic GDP growth. That is a few years later, at least in these days, not many people know that the country

attach great importance to this high-speed rail project.

And Liu Yonghao has introduced this project to himself now, which completely shows that he already knows some plans for the country's future development, but if he introduces this project to himself without considering other things, then he must inherit his job.

friendship.

"Well, after listening to Minister Liu's introduction, I have a general understanding of the bearings required for our domestic high-speed rail projects. According to the specifications and requirements mentioned by Minister Liu, I just recalled part of our company's

It seems that there are still a few products from the Special Metal Smelting Center that meet the needs of bearings required by our domestic high-speed rail."

Since I have decided to accept Liu Yonghao's love, there is no need to be pretentious at this time. In addition, Minister Liu's attitude of looking down on all domestic companies just now also makes Jin Xiaoqiang feel uncomfortable. Are foreign companies so good?

That's because you haven't inspected our Huayang Power's special metal smelting center. If you have been, I can tell you responsibly that not only can we produce this kind of bearings there, we can also produce them even for aircraft bearings.

Coming out, Jin Xiaoqiang looked at Minister Liu's shiny forehead and secretly cursed in his stomach.

"What? Are you serious?"

Minister Liu and Liu Yonghao asked this question almost at the same time. Minister Liu asked this because he was surprised that there was such a company capable of producing such bearings in China. He did not know about it, which made him a little embarrassed.

Liu Yonghao asked this out of surprise. He came from an industrial background. Although he was mainly concentrated in the automotive field, after he later took charge of the Ministry of Industry and Information Technology, he also did considerable research and understanding of other industrial enterprises. For my country's current situation Very knowledgeable about the industrial situation.

Especially some industries with shortcomings, such as bearings. Back then, he also visited many bearing companies in my country, including the famous Kazakhstan bearings, tile bearings and other companies. However, the production conditions inside made him very disappointed. disappointment.

In addition, Minister Liu just said a lot of professional sayings and requirements for high-speed rail bearings. The more he listened, the more he felt cold. He originally thought he could bring some business to Jin Xiaoqiang, but he didn't expect that this would turn into embarrassing Jin Xiaoqiang.

, as far as we know, few companies in China can manufacture such bearings.

But now that Jin Xiaoqiang is convinced that they can make it, how can Liu Yonghao not be surprised?

"The bearings that Minister Liu just mentioned require not only wear resistance and long contact fatigue life, but also high impact toughness and dimensional stability. I thought about it, and it seems that we have really used this kind of bearing steel before.

It has been developed and verified, but the results are not particularly ideal.”

When Jin Xiaoqiang said this, Minister Liu's face darkened, aren't you kidding me by saying this? You're talking nonsense if it's not ideal!

"The original purpose of developing these two steels was to find new materials for our automotive technology. At that time, we were also looking for a new bearing material. In order to have stricter requirements for our own product standards, we developed high-speed rail in accordance with the standards of European and American countries.

Bearing steel standards to find suitable products. At that time, there were two types of products that met the conditions: one

One is fully quenched bearing steel, and the other is carburized bearing steel, but these two products have their own advantages and disadvantages. Carburized bearing steel is widely used, but the heat treatment process of this product is complex, the cost is high, and

If the quality of carburizing is not properly controlled, the impact resistance will not meet the standard. When receiving a strong impact, it will

It is easy to cause iron pieces to fall off. The quenching structure of fully quenched bearing steel is all martensite, which will result in high hardness but insufficient toughness. Finally, we will discuss the shortcomings of these two bearing steels.

We engaged in public relations and finally won this project at the beginning of this year. The best conclusion we came to was that Pei

The body is subjected to an isothermal quenching process, so that bearing steel with high strength and equally high toughness can be obtained. Such bearing steel has now been used to produce some bearings and is used in our own finishing machine tools.

And they are also used in our cars. The current performance of these bearings is very good..."

{PiaoTian Literature www.PiaoTian.com thanks all book friends for their support, your support is our greatest motivation}