Scholar’s Advanced Technological System

Regardless of how the overseas media and the people who eat me are surprised, Lu Zhou, who is standing in the underground laboratory, is completely shocked by his own little Ai.

It is a bumblebee and it may not be quite correct.

To be precise, what is presented to him is a model of a bumblebee. The smooth, flat aluminum casing that was tapped exudes a shiny metallic luster under the incandescent lamp on the lab ceiling, and the mechanical construction beneath the streamlined casing perfectly fits the complex aesthetic.

Although it has not been colored, but because the degree of reduction is too high, Lu Zhou, who is still impressed with the Transformers series, is still recognizable.

Although this large hand is still a little bit to be completed, the materials piled up in the lab are still left, and the industrial robots leaning against the wall are not stopping.

I saw that the eight robotic arms, like the octopus, flexibly flipped the aluminum alloy plate in the hand. The "hand" scythe and the hammer slammed on it, and the skillful movement did not know it. How many times faster to get these new toys.

Through an algorithm similar to neural network learning, as long as it adapts to a tool, Xiaoai can quickly apply it to the extreme. This application is not limited to the control of the plasma, it is obvious that machining and automatic assembly are within its reach.

only……

Lu Zhou: "What are you doing?"

The non-stop robotic arm stopped.

The drone body that floated beside it swayed, like a hoe.

Soon, Lu Zhou’s mobile phone received a message from Xiao Ai.

[The owner is not asking what kind of body does Xiaoai want? I didn't want to trouble the owner, I did it myself. 】

Lu Zhou: "..."

[How, Xiao Ai's new body is not cool! 】

[Quickly praise me, hurry up, boast me, take the owner to go for a ride!ヾo]

Ok, Lu Zhou admits that this stuff is really cool.

but……

Is this something useful?

Although I didn't want to fight the enthusiasm of this guy, Lu Zhou couldn't help but ask: "How do you plan to put yourself in?"

Eight mechanical arms slammed.

After a while, a message popped up on the phone screen.

[Can't you go in? Σ_]

Lu Zhou: "...no, no."

Although this model does a good job...

But what to say, robots can not be used to design a look.

Not to mention that there are no motors and servo motors, and even the control chip and the signal receiver are not. Doesn't this guy consider putting his own program there?

This kind of common-sense thing, Lu Zhou does not know how to vomit.

After a long time, a bunch of bubbles popped up on the phone, and the arm on the wall also threw away the alloy plate in the hand and sagged down.

[...qaq]

Looking at this three-letter message, Lu Zhou sighed in his heart.

This guy……

Is it a mental retardation?

Even children should be able to distinguish between movies and reality.

"In the end, don't play, come and help me."

Even the comforters are not very likely, let alone comforting artificial intelligence.

Without taking care of Xiaoyi, who was in depression, Lu Zhou went straight to the side of the wreck No. 3. He reached out and uncovered the plastic sheet above, and then returned to the control terminal of the industrial robot.

Putting on the new equipment of the Lu Zhou, this time I finally did not have to hold the pliers myself, clumsily climbed in and sampled.

With the help of this little Ai and the eight industrial robots, he easily completed the disassembly of the wreck No. 3.

In fact, it is not a special effort to disassemble this thing.

Although the material of the outer casing is very strong, considering the maintenance, the designer of the equipment cannot say that it is welded to an unremovable structure like the hull armor.

Relatively speaking, the engine behind the spacecraft or the abdomen is a safer part.

Of course, this is only relative.

The wreckage was neatly split into three sections, and looking at the messy situation inside, Lu Zhou’s brows twitched hard.

The situation was worse than he had imagined. The huge impact not only completely destroyed its parts, but even destroyed the internal structure.

For example, the metal pipe whose root is flattened on the inner wall side can only be guessed by the existing knowledge and brain hole. This thing is probably similar to the temperature exchanger or the plasma engine feed. Or the like.

Connected to the tube that is flattened and fractured, it is a special flat cylindrical hollow structure.

"Electrode... Heat Exchanger... Is this an ionization chamber? Is it a Hall thruster?"

Staring at the picture taken through the industrial camera, the boat on the chair touched the chin and fell into meditation.

Behind this empty groove structure, a spout shaped like a conical flask is connected.

Further to the back, it is the bowl-like structure at the end of the entire wreckage.

Through the analysis of the internal structure, Lu Zhou made a bold conjecture.

The engineer who designed the device probably took a design approach that was currently in the air... or a common practice in his civilization.

That is, the ionization chamber is taken out separately, and then the plasma-emitting nozzle is designed as a single Hall propulsion unit, which is integrated behind the ionization chamber.

The ionization chamber ionizes the gasification propellant by heating and applying a voltage, and forms a high temperature plasma while expanding in volume, and is simultaneously sent to the "Hall Propulsion Unit" connected to the rear of the ionization chamber. That is, the one that grows like a conical flask.

With a special design, these Hall propulsion units are able to process high temperature plasmas in the ionization chamber more efficiently and spray them out of the engine.

At the same time, the middle ** integrated on the tail rectifying ring neutralizes the ejected plasma plume, preventing the injected plasma from being sucked back into the ionization chamber...

In theory, as long as the power output is large enough, the plasma is shot fast enough, and the engine power can be infinitely increased before the critical current of the superconducting magnet, the ionization chamber pressure and the temperature break through the threshold.

According to the direction of the cracks of those pipes, Lu Zhou can even speculate that before being "wrapped", the pilot of the spacecraft probably carried out some dangerous evasive operation, so that the power of the engine was under overload and maintained. a period of time.

Looking at the squashed tube of the root, Lu Zhou fell into meditation.

I always feel that the secret behind this system seems to be getting more and more...

After determining the external work components of this engine, the rest of the work is easy. By comparing the pictures taken by Xiao Ai, Lu Zhou quickly found the "fuel tank" of the engine, which is the storage medium. s position.

However, the question came again soon. Where did the electricity come from?

Regardless of how the Hall thruster is designed, the thrust provided per kilowatt is not too high, even if this higher civilization made the jet velocity of the plasma plume a rather exaggerated magnitude, making its thrust break through n, mn Even eventually reaching the order of n, let the spacecraft of more than 100 tons reach an acceleration of at least 1g, and the electrical energy required is also a rather horrible number.

At the very least, the output of electrical energy must also reach the order of mw.

Such huge power consumption is obviously not affordable for ordinary batteries.

At least what lithium-sulfur battery is definitely not playing.

It is speculated that the energy storage unit should not be far from the fuel tank of the storage medium. Looking at the circular double-layer structure connecting the fuel tank and the temperature exchanger, Lu Zhou always feels that this thing is somewhat similar to something, but Can't remember where I have seen it.

However, at this moment, a crazy and unrealistic thought suddenly emerged from his mind.

Is it...

Nuclear fusion? -

Thanks to the buddy of the book "Shu Shengmo"

Strive to pay debts...qaq