Scholars in the courtyard

"Before? Did you come up with a new one?"

Yang Youning reacted the fastest and immediately asked.

Seeing this, Yang Xiaotao didn't hide anything. He took out a drawing from his backpack and placed it on the table.

"Isn't this the machinery factory saying that the production of tin-plated iron is not up to standard and a better rolling mill is needed."

"In the past few days, we have redesigned a steel rolling mill, a four-roller rolling mill, which is more suitable for processing thin iron than a three-roller."

Yang Xiaotao spread out the drawings while explaining, with an indifferent expression.

But several people around him looked at the monster, and all of them remained silent.

It wasn't until Yang Xiaotao spread the drawings on the table that he felt something was wrong with the surrounding atmosphere. At this time, he looked up at a few people, and then saw Mr. Zhang staring at him with burning eyes.

"Chief, why are you looking at me?"

"Damn, you guy, why didn't you tell me about such a big thing earlier!"

As he spoke, Yang Youning sat down next to Yang Xiaotao, and even reached out to press the design drawing on the table, pretending to look at the drawing carefully.

In fact, I am just afraid of being robbed.

There was nothing I could do, my rolling mill was robbed overnight.

The key point is that I told the above, and it is most likely a quarrel between Huang and Lao.

People have eaten everything in their stomachs, how can you expect them to spit it out?

This mute has to suffer.

Right now, a better rolling mill design is right in front of us, if only...

Glancing at Mr. Zhang, he knew the relationship between Mr. Zhang and Mr. Huang.

If it were taken away, it would still be their machinery factory that would suffer.

Hahaha

Liu Huaimin saw the envy in Director Zheng's eyes and quickly laughed loudly.

"Xiao Tao, please tell the chief quickly how our machinery factory is designed."

The sound is particularly heavy on the words "our machinery factory"!

Yang Xiaotao nodded after hearing this, understanding what they meant, and was amused by their vigilance.

Mr. Zhang on the side also calmed down at this time. He almost had a heartbeat just now.

Based on his understanding of Yang Xiaotao, there was nothing wrong with the design drawings this guy produced.

Even if there is, it is because the person who did it made a mistake.

Well, not just once.

But no matter how tempted he was, he couldn't do anything like Lao Qin. It would be too embarrassing for his elders!

Looking at Yang Xiaotao, Mr. Zhang had more approval in his expression. He thought that the new rolling mill would definitely be better than the one that Lao Qin had snatched, and he was no longer so anxious.

If the quality of both parties is the same, then the competition will naturally be speed and time.

But with a better rolling mill, it can do better, and the speed is not important at all!

Thinking of this, Mr. Zhang asked in a gentle manner, "How many days will this new rolling mill be used?"

Yang Xiaotao shook his head after hearing this, "I don't know that either."

Several people were confused.

Yang Xiaotao explained, "This new rolling mill requires higher precision and technology than a three-roll rolling mill. The requirements for machine tools and workers' technical requirements are more than those of a three-roll rolling mill. Therefore, it is relatively difficult to manufacture." some."

Everyone knows what Yang Xiaotao said, just like a machine tool, the better it is, the harder it is to make it.

After several people listened, Liu Huaimin and Yang Youning didn't say anything. They had even made machine tools like Morning Star, so why were they afraid of a small steel rolling mill?

It's nothing more than a waste of time and energy, and it's nothing to the machine shop.

But for Zhang Lao and others, although time is no longer tight, they are not very rich either.

"We are in urgent need of a steel rolling mill, and a rolling mill that can be used for finishing."

Mr. Zhang did not urge Yang Xiaotao to give a specific time, but he stated his needs.

The implication is that the faster, the better.

Director Zheng on the side also spoke.

"Xiao Tao, think of a way. If it weren't for an emergency this time, Chief Qin wouldn't have come at night, and we wouldn't have come early in the morning."

"I really can't afford to delay it!"

Director Zheng knows his own affairs.

Although aircraft research in the Northeast is on the right track and the Alliance's MiG-19 has been successfully imitated, this imitation is not without problems.

First, there are many hidden dangers.

Especially for the engine, firstly, the alliance did not provide it sincerely, and secondly, the domestic basic materials were not up to standard, resulting in many engine failures, especially the fracture of the turbine shaft, which was the most serious, causing many accidents. For this reason, Two outstanding comrades were sacrificed.

Furthermore, after an aircraft based on the MiG-19 is copied, it will be difficult to surpass the prototype in performance, and it is likely to fall behind the world's mainstream.

Especially now that the main equipment of the alliance is the better MiG-21, the gap is clear at a glance.

Now that the situation on both sides is unclear, some things need to be prepared for a rainy day.

Therefore, superiors requested the development of better engines and better aircraft.

The cooperation between their Third Machinery Department and the Logistics Department is the product of the urgent needs of their superiors.

"I can help with this."

"But, I can't guarantee the specific time!"

Yang Xiaotao thought for a moment and then agreed. After all, he had to personally master the manufacturing of many parts and sum up his experience.

Hearing that Yang Xiaotao agreed and took action himself, a smile appeared on Mr. Zhang's face.

Director Zheng patted his legs and said with a smile, "As long as you help, I have confidence in you."

Yang Xiaotao also smiled.

When Mr. Zhang saw Yang Xiaotao asking for help, he said, "If you have any difficulties, just ask us. If you have any needs, we will definitely satisfy you as long as we can help you!"

Yang Xiaotao shook his head, "It's hard to say now. If we really encounter difficulties, we will definitely not be polite!"

The few people reached a cooperation, and Yang Xiaotao then went to the R\u0026D department and called everyone to get ready to work.

A moment later.

R\u0026D department, conference room.

At this time, all the R\u0026D department staff in the machinery factory arrived and filled the entire conference room.

Everyone looked at the design drawings they were assigned and looked at each other.

A few days ago, they were still thinking about how to make a four-roll steel mill, and they were still looking for research directions these two days. As a result, General Manager Yang quietly took out the design drawings.

Really...

Zhang Guanyu and Liu Daming and others looked at each other. They all had an absurd idea.

Yang Xiaotao didn't design a three-roll steel mill, not because he didn't know how to design it, but because he didn't have time to design it.

Or, in Yang Xiaotao's eyes, a three-roll steel mill is not a big deal.

Although it was a bit of a blow to his self-confidence, Yang Xiaotao was not so fragile after being tempered by his achievements.

Yang Xiaotao looked at the appearance of everyone and knew that his progress was a bit fast.

If he followed the previous research method, he would give the R\u0026D department time to research and design, and give them the opportunity to grow.

And this method really allowed the people in the R\u0026D department to exercise and improve their abilities.

The design of the three-roller steel mill last time was a manifestation of the results.

But this time, if it weren't for Zhang Lao and others rushing to find him, he really wanted to do it step by step.

Zhang Lao and Director Zheng watched the scene accompanied by Yang Youning.

As for Liu Huaimin, he had gone home to catch up on his sleep.

"Is this your R\u0026D department?"

Looking at the orderly work of the people in the room, and the occasional discussion, Zhang Lao was surprised and a little envious.

Yes, envy.

Although he has many research departments and many people involved in research.

But the feeling here gives him more of a vigorous passion.

"Commander. This is our R\u0026D department."

Yang Youning said with pride, "We have placed college students, talents, and special technical personnel here in the past few years."

"If you ask where the most essential part of the machinery factory is, it must be the R\u0026D department!"

Yang Youning said it decisively without hesitation.

After listening, Mr. Zhang nodded silently. With the endless research capabilities of the current machinery factory, it would be impossible without a strong R\u0026D team.

"Our R\u0026D department is divided into three groups: the R\u0026D department, the technical department, and the logistics department. Later, we added the security department, which is responsible for the protection of data security..."

"The people here now are the R\u0026D and technical groups."

"Look! The people on the left who are studying the drawings carefully are the people from the R\u0026D department."

"The people on the right who seem to have nothing to do are from the technical group. Of course, they have nothing to do now, but they will be busy later!"

Yang Youning felt uncomfortable sitting there without saying anything, so he introduced the composition of the R\u0026D department, and helped Yang Xiaotao to say good things during the period.

However, Mr. Zhang noticed that in this clearly divided group, there were more young people on the left and more old people on the right.

It can be seen that R\u0026D and technology still have age requirements, especially the technical team focuses on personal experience.

On the other hand, after the data drawings were distributed, Yang Xiaotao began to arrange the work.

"Director Zhang, you take people to arrange it. We must start work as soon as possible."

"Everyone, take a look. If you want to meet the design coefficient requirements, what materials to use, make a good calculation, and start as soon as possible."

Zhang Guanyu nodded in response. This kind of thing is commonplace.

"Team Leader Liu!"

Yang Xiaotao looked at Liu Daming on the side.

"Boss Yang!"

"How is the research on the special thread that Lao Guo came up with last time?"

Liu Daming scratched his head, "Boss Yang, this special screw experiment has indeed greatly increased the stability of the machine tool."

"Now we have adopted this screw in special parts!"

"However, there is a little problem with the production of this screw."

"What problem?"

The two people's questions quickly attracted the attention of the people around them.

Especially Mr. Zhang and Director Zheng, who vaguely heard something special.

Liu Daming took a screw from the table, "Mr. Yang, look!"

"This is the screw we made in the early stage. Although we made some according to Lao Guo's description, it is difficult to control the accuracy."

Yang Xiaotao took the screw and saw nothing wrong at first glance, but as long as he looked closely, he would find that the threads on the screw were broken, discontinuous, and even uneven.

"Is this, the knife is not good?"

Yang Xiaotao looked at it for a while and found the cause of the problem.

Liu Daming nodded.

"We used the Morning Star to process it. The accuracy cannot be guaranteed by ordinary machine tools."

"But even so, the one made by the Morning Star is not perfect, and there are still problems."

"Then use a better machine tool and a better knife!"

Yang Xiaotao answered without thinking, "If the Morning Star is not good, then use the Shining Morning Star, and if it doesn't work, use the Morning Star!"

After Yang Xiaotao finished speaking, Liu Daming opened his mouth, a little unbelievable.

In his opinion, it was just a small screw. Using such a good machine tool to make it was not a big knife to kill a chicken.

And every time the machine tool runs, it is a kind of wear and tear on the turning tool.

“It’s not worth wearing out the knife just for a few screws!”