Since I Was a Special Soldier

Chapter 1404: comminicate

China used to be a copper-poor country, so even bullets had to use steel bullets, but now there is no shortage of copper, so it is normal for bullets to reuse copper bullets. After all, the advantages of copper bullets are much more than steel shell bullets. of.

In the past, the biggest disadvantage of copper shell bombs was that there were no minerals in the country, and the output was small. Now the output of this thing is the first large-scale copper-gold mine discovered in Daqin, and it is also a copper-rich mine, which is extremely easy to mine. The preliminary calculation of copper reserves reached 11 million tons, and the half-life gold reserves also exceeded 800 tons.

As for gold, don’t be afraid that more gold will depreciate, because with the development of high technology, the use of gold in technological products will become higher and higher. Many industrial products use gold, so it’s No amount of output is enough.

   But Jiang Yanhai and the others are still using steel shell bullets. Who makes the steel shell bullets produce more, so this thing should be used up first. As for the troops behind to start to replace the copper shell bullets, they will first change them in reality.

   When they arrived at the square below, Lin Dianshuai hesitated and said, "Aren't you afraid of the attack now?"

   "It's okay, some of us are staring, we can go up anytime." Jiang Yanhai smiled slightly.

   He can't say that at this moment, there are three large drones in the sky for reconnaissance at high altitudes, and there are also micro drones for reconnaissance at low altitudes. In fact, if you look closely, you can still find them.

After all, the sky at this moment is in a cloudless state, but they don’t know what is flying in the sky. Even if they see something, they just take a curious look. What's more, the altitude of the drone at this moment is not low, it seems It's almost the same as a bird.

   "Okay." Lin Dianshuai nodded.

The manual chain-installation machine is actually very simple. It is just a relatively ordinary machine. The dispersible chain is placed on the palm-wide workbench on the right side of the machine, and there is a dedicated bullet-in on the left side. The trapezoidal groove is like the entrance of a machine for processing corn.

Place the bullet head in it to the right, and then turn the small crank next to it. After a turn, a bullet will be automatically pushed from the entrance of the machine by something similar to a bolt to the workbench on the right, and then directly pushed Put it into the dispersible metal bullet chain, and turn the bullet chain around to automatically install a bullet. The speed is still very fast.

   But this is manual after all, because there is no electricity here, this thing is still more troublesome to install.

   But this is actually very good. At least it can be used in China now. If it used to be a non-dispersible chain or a semi-dispersible chain.

The oldest non-breakable bullet chain is the canvas chain during World War II. The bullets are stuffed into the canvas, one by one to form a bullet chain, but after the machine gun is used, the canvas chain is still intact, and you can continue. use.

   But the canvas chain is prone to failure, so during World War II, you can see that there must be a bomber next to the heavy machine gun to maintain the stability of the chain and ensure the stable output of the machine gun. This canvas chain was abandoned after World War II.

   After World War II, countries like the former Soviet Union began to use metal non-spreadable bullet chains.

To put it bluntly, the left side of your machine gun enters the bullet chain, but the right side shell is thrown away, and the non-split metal bullet chain is still connected to your machine gun. Imagine that the metal bullet chain is connected to the machine gun. It is not very convenient on the battlefield. .

The metal dispersible bullet chain, to put it bluntly, although the metal buckle that fixes a bullet is connected together when it is received, after it is shot from the machine gun, it will be directly scattered like a bullet case. Throw away at the same time.

  Of course, the single metal buckles that were thrown away can also be manually connected together, manually reload the bullets, and reconnect manually, but that is too troublesome, and the old beauty is thrown away directly after the battle.

   And this kind of bullet chain is definitely helpful for the stable output of the machine gun, but it is expensive, so it used to be used by local tyrants like Lao Mei.

   is now available in China.

   Of course, the main reason is that high-rate machine guns such as revolving machine guns have better stability using dispersible metal bullet chains.

   The previous domestic use was a semi-dispersible type. To put it bluntly, we couldn't use it like the old beauty, and we affected the combat performance like the Maozi. Later, we simply thought of a way.

   That is, every 10 or 15 bullets, the metal bullet chain bayonet can be dismantled and thrown away once.

  When used in this way, it does not affect the performance. At the same time, when it is recycled and reused, it is not so troublesome to connect 10 or 15 bullets at once.

   And the length of the bullet chain can also be freely controlled.

   I can only say...I don't have money to make trouble.

  If you have money, who doesn’t want to use the dispersible style? As for recycling? Recover the fart and throw it directly after hitting it. If there are conditions for recovery, such as a defensive operation like this, then a large metal box will be placed directly on the side of the revolving machine gun toss the missile shell. The shell and the chain will be thrown away directly. Inside the metal box.

   When the time comes, go directly back, melt the shell and the chain again, and re-make it. This is how the rich play, and now we can also have money.

Jiang Yanhai has already passed the order to the logistics personnel~www.wuxiaspot.com~ There are a total of 50 manual chain-installing machines. In fact, this machine is not big, small in size, which is about 30 inside. The length and width are only ten centimeters at the widest point, but for convenience, they are fixed on some workbenches.

   "I'll show you it, it's actually very simple." Jiang Yanhai, the chain-installing machine, stood in front of the generals of the shadowless imperial army, especially General Wu, who looked more carefully and seriously.

This machine is very small, but in General Wu’s eyes, it is ingenious. Because it is so small, but it has such a complicated structure. For their blacksmiths, they want to build it. It is definitely a test. Just the mold. Very accurate.

The empty bullet chain next to it was as if it were installed into a machine gun. Jiang Yanhai picked it up and placed it on the workbench. Then he grabbed a handful of 7.62mm bullets from the standard bullet box opened next to it, and the bullet pointed at the workbench. The direction entered the entrance, and then grabbed another hand.

   After putting dozens of bullets in, Jiang Yanhai directly turned the small handle.

   With a clear sound of "click", as Jiang Yanhai turned around, a bullet was immediately jammed on the chain, and then he turned for the second time. .

Then under the comments of Lin Dianshuai and several generals, Jiang Yanhai's hand speed was fast, and the sounds of "click" and "click" continued to sound, and the bullets were accurately installed into the bullet chain, forming a long metal bullet. chain.

   Even at a very average speed, it would be easy to rotate one circle in one second. When dozens of bullet chains appeared there, Lin Dianshuai and the others were a little surprised.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like