Starting from Natasha, dominate the world of technology

On Bilibili’s backstage, there are constant private messages.

Most of them are fans urging for updates, and some technical parties asking about the technical process.

Others are invitations from various platforms, hoping to cooperate.

There are even several well-known brands.

Because Jiang Chen did not publish his contact information on the platform, they could only contact him through private messages.

"It seems that a popular video has greater influence than I imagined."Jiang Chen couldn't help but sigh secretly.

He looked at the number of fans again.

In just half a day, the number of fans increased by 100,000 to 300,000!

The number of views also reached 1.5 million.

As for The technology points increased by 1000 again, reaching 7000 points.

However,

Jiang Chen knew that the video was recommended and exposed a few days ago, so there was a short-term explosive growth.

After a few days, the popularity decreased, and the number of views and fans The growth rate will gradually stabilize.

Jiang Chen replied to some private messages and then devoted himself to the production of exoskeleton armor again.

Before, he only made mechanical limbs, as well as helmets, breastplates and driving devices behind them. There is no production.

With the robot knowledge learned from Super Jiang Team, this unfinished part can be enriched.

At the same time,

Jiang Chen also went online to purchase some materials needed to make a 3D printer.

In addition to the special Except for the Mobenxi that needs to be upgraded with technology points, the other materials can be found in this world. The same model or substitutes. After two days of busy work, Jiang Chen finally made the breastplate of the mechanical exoskeleton.

With the mechanical limbs After putting it on, he looked even more stylish and handsome. He felt a bit like a future warrior!

However, Jiang Chen did not release the video immediately.

He planned to release all the equipment together after he finished it.

In this way, the effect can be achieved through demonstration It was even more shocking.

Just like that, ten days passed.

Jiang Chen finally made a complete set of exoskeleton armor.

At the same time, Jiang Jiang Xuxu also purchased all the relevant materials for making a 3D printer.

According to the relevant drawings in his mind, Jiang Chen Chen started to assemble the 3D printer.

He built the frame, set the program, and polished the materials.

It took a full day to finally make the finished product!

This is a three-meter-wide and five-meter-high machine. Equipment.

The appearance is somewhat similar to an ordinary printer, but it is much more complicated than an ordinary printer.

The top is the material input port. After the materials are put in, the system will go through internal inspection and classify the materials into various areas!

Then, import After modeling the 3D model, you can start printing after setting the relevant proportions.

The printed finished product will be slowly generated from the outlet made of special nanomaterials below!

If the height or width of the model exceeds the 3D The capacity of the printer.

The 3D printer will print layer by layer according to the model, and the rest needs to be assembled by yourself.

Of course.

The width and height of the 3D printer can also be adjusted by yourself.

Because Jiang Chen now only needs to print prosthetic limbs , so there is no need to make the 3D printer too big

"Try it out."

Jiang Chen introduced the designed 3D inflatable doll of a certain teacher into the 3D printer.

Then he put the relevant materials into the material port and pressed the start button.

Soon

, the 3D printer started The light came on and printing started.

Five minutes later, with a ding, the inflatable doll was slowly produced from the exit.

Jiang Chen opened the finished product warehouse, took the inflatable doll out, and began to look at it carefully!

"It's so perfect, just like the real person."Jiang Chen was amazed.

The effect of the 3D printer is amazing.

Every detail of a certain teacher's body was perfectly reproduced.

Every proportion is also very precise, almost the same as the modeling graphics.

It's like a heifer basking in the sun. Damn it!

Once this product is launched, it will definitely be good news for otakus.

Those two-dimensional wives, through 3D printing, can almost appear in the real world perfectly (dbbd)! They are no longer in fantasy

"Ahem, Mu Tong still can't let Mu Tong see this."Jiang Chen coughed dryly.

He quickly put the inflatable doll into the material port, and then pressed the factory reset button.

Soon, the inflatable doll was fed into the 3D printer.

After a while, it became raw material again. ( To read Baoshuang novels, go to Feilu Novel Network!)

Of course, the content of materials has been reduced.

When making the inflatable doll just now, it was impossible to use all the materials.

Some excess materials will be sent to 3D printing aircraft scrap bay

"Compared with exoskeleton armor, this is black technology!"Jiang Chen secretly sighed.

If this 3D printing machine technology is made public to the world, it will definitely bring about earth-shaking changes in the production and processing industry!

Not only can it perfectly reproduce the modeling drawings, but the production time is also very short.

"Ten days have passed and it’s time to publish the second video in the Starting from Scratch series."

Jiang Chen placed the 3D printer in the garage, and then began to make and edit the exoskeleton armor.

After ten days of fermentation, the popularity of the video gradually decreased, and the number of views was finally fixed at more than 3 million. The number of fans increased to 50 Thousands.

One video attracts 500,000 fans, which can be called a phenomenon!

After all, some up owners may not be able to achieve this number of fans even if they work hard to update for a year or two.

Jiang Chen looked at the broadcasts on other platforms Although the volume is not as high as Bilibili, it still has a considerable number of views.

Added up to the entire network, the number of views has almost exceeded 10 million!

The technology points have also increased by 3,000 points accordingly.

However, because Jiang Chen made 3D printing The machine used 2000 technology points, so his current technology points are still only 7000.

"It’s really useless. I need to earn some technology points as soon as possible. When the company is officially established, a 3D printer alone will definitely not be enough."

Jiang Chen didn't delay any longer and began to devote himself to the production and editing of the exoskeleton armor video.

One day later[]

The second video in the Starting from Scratch series has been officially released.

The title is: Exoskeleton Armor from Scratch Complete Version.

It was sent out less than ten minutes ago.

The number of plays quickly exceeded 10,000.

One barrage after another started to appear.

"He is here, he is finally here with black technology!"

"Ah, this time it’s the complete version. As expected of a conscientious up owner."

"The trick is here, what trick will you use this time?!"

"I don’t need any skills to do black technology, just cheating!"

Jiang Chen looked a little confused when he saw the subtitles filling the screen, and he immediately realized what he was doing. A previous comment asked what skills were needed to make an exoskeleton armor, and he replied: No skills are required, just cheating.

Unexpectedly, he directly It was used as a joke.

I have to say that the ability of sand sculpture netizens to exploit every opportunity is quite good.

However, after all the jokes, many netizens turned their attention back to the video. When they saw this exoskeleton armor When I saw the new function, I couldn’t help but be shocked again!.