Super Biotech Empire

Another biggest function of this ring is to install an electric pacemaker. This is a powerful device. If someone does not turn it off, as long as this pipe is exposed to the air, it will be damaged by a thousand A click of a volt that could stun an adult but not kill it.

The role of microorganisms is to carry these graphenes to fill the gaps in the entire pipeline to prevent pipeline rupture caused by uneven pressure. What's more, he can turn the formed graphene into a semi-solid and semi-liquid state again, so that the foreign graphene can be tightly combined with the formed pipeline.

After about ten minutes, when the microbial activity should be complete, the welder said a red and black wire was connected to the reserved ends of the container. Then they took out two copper wires and connected them to the two sides of the gap. At this time, the welding personnel also climbed up the tunnel, and this action happened at the five joints at the same time.

"Everyone evacuate to ten meters away." At this time, as the chief engineer of the project, Wei Donglai gave orders.

"The power supply has been connected."

"Boost device is OK."

"The wiring is normal."

"Everything is normal, electric shock or not."

"Electric shock." Wei Donglai gave an order, and a burst of sparks flickered everywhere.

"Report that Mr. Wei has finished the electric shock."

"Power off."

"Boost device off."

They have to repeat this set of procedures more than ten times a day, but even though they are very familiar with it, they still follow the formal procedure every time. After all, this is a high voltage of 100,000 volts, which is no joke.

"Yang Yuan, lead the inspectors and carry out the inspection." Wei Donglai gave the order five minutes later.

"Yes, come with me." Yang Yuan greeted the two Star Academy students behind her who were wearing discharge suits like her. Except for the three people who went to check, everyone else stayed in place and could not enter the ten meter range of the pipeline. About twenty minutes later, Yang Yuan's inspection report came through the communication device: "The seams are perfect, everything is normal."

After Yang Yuan finished speaking, all the staff started their work again, and they had to do this many times a day.

The section that Wei Donglai is in charge of is basically flat land, so their work is not very hard. The hardest ones are the first and fourth groups. All the routes of the first group are in the mountains, so they need to build a tunnel to pass through the mountains, which makes their construction very difficult. The routes of the fourth group are all in the desert, and the others are good, but the environment is a bit harsh. The second group is similar to Wei Donglai, so their work progress is almost the same as that of Wei Donglai.

The high voltage of 100,000 volts is to kill all the microorganisms, so that the liquid graphene can be instantly solidified, which will greatly reduce the air bubbles at the seams. The developers of this technology are the students of the first class. They also developed this method by chance, but it is a bit dangerous. But Starry Sky City can't wait anymore. With the deepening of aerospace engineering, the processing and manufacturing of some parts requires more water, so it is used directly.

When the first batch of students designed this plan, they also focused on feasibility, and did not do anything in terms of operational safety. So after the front staff responded to this problem, He Miao, as the main designer of this project, was also heartbroken. Up to now, he has not found a method that can replace the electric shock.

Chen Qiang also heard about it, but he didn't do anything. This matter is really too small, if he is allowed to solve it, he can come up with dozens of solutions.

Right now, he is making some preparations for the Starry Sky Academy's assessment. The assessment period is only one month, so the questions for this assessment should not be too difficult, and the time required should not be too long.

"Teacher, how do you think we will take the exam this year, whether to take the exam separately or together." Chen Qiang really had some headaches, so he could only turn to his teacher for help.

"One month, I think it's better to take the exam separately. After all, if it is the big problem of the previous session, one month is not enough." Kong Ru is also thinking about this issue these days.

"Then take the test separately, but what are we going to take the test for? After all, there are a lot of people who need to be eliminated this year, so some of the results of our Starry Sky Research Institute cannot be used in the topics of this year's students." Chen Qiang said distressedly.

"This is also a problem. If you don't tell me, I really forgot. What are those principals just coming to see what they are learning?" Kong Ru said with a smile. For this matter, Kong Ru could only do nothing to help. You must know that the first class of students of Starry Sky Academy was given by the founder Chen Qiang. You must know that the four deans of the Starry Sky Academy had already drawn up the assessment items, but they were directly killed by Chen Qiang's big plan. Can be swallowed by himself.

"They have been impatient for a long time, but they were stopped by me. I just let them come in the final report stage." Chen Qiang said helplessly. For these 1,500 students, these principals are very concerned, and basically make a phone call every week to ask.

"Okay, I can't help but sit here now, I'll go back first, you try to hurry up, the students are already dying." Kong Ru left the office with a smile. And Chen Qiang wrote down the first assessment question - 3D printing - after thinking hard for a long time.

3D printing has been widely used in the world, but the current 3D printing technology is limited in many aspects, such as material limitations, machine limitations and so on. Especially the limitations of the machine, which directly led to the promotion of 3D printing technology.

3D printing technology has achieved a certain level of reconstruction of the geometry and function of objects. Almost any static shape can be printed, but those moving objects and their clarity are difficult to achieve. This difficulty may be solvable for manufacturers, but if 3D printing technology wants to enter ordinary families and everyone can print what they want at will, then the limitations of the machine must be resolved.

So this is a project Chen Qiang gave to the students of the School of Mechanical Engineering to let them solve this problem, so that 3D printing technology can truly enter every family and become a necessary product for every family. 3D printing technology has been widely used in Xingkong Group, and now many parts are manufactured using 3D printing technology. However, Xingkong Machinery Research Institute is developing large-scale 3D printers, and Chen Qiang intends to let these students enter the field of small-scale 3D printers.

Brothers, a chapter is missing, woo woo woo, forgive me.