Super Dimensional Wizard

The Pamiji Plateau is located in the southwest of Yongye Kingdom and is a bilateral area of ​​communication with the Guman Kingdom. Liewen】WwΩW． ΩＬｉｅＷen． Because the average altitude of Cc is above 3500 meters, there are few people coming and going. Except for some native primitive tribes, the Pamiji Plateau is an undisputed human forbidden zone.

But on this day, in the blue sky, a huge black shadow shining with crystal light passed by.

It was a strange thing. It was hard to tell whether it was alive or dead. Its overall structure is a flat and huge transparent crystal. There are white threads in the crystal, which look like ice... No, it should be said to be ice.

Because when a plateau eagle flew over a hundred meters away, it froze into an ice sculpture and fell down.

If it is ice, it must be a dead thing. But why is it misunderstood as a living creature? The reason is that this huge piece of ice, about 20 meters long, has equally transparent wide wings on both sides. The style of the wings is similar to that of a swan. Every time he flaps his wings, crystal ice feathers fall down.

The strong sunshine on the plateau illuminated this piece of ice with wings, making it crystal clear and shiny.

On top of the ice, several mysterious people in white robes were resting with their eyes closed. The endless freezing power of the ice seemed to be unable to harm them. On the contrary, in the mist of white air, their figures became more and more ethereal.

If you look carefully, you will find that the backs of the white-robed people are all embroidered with a frozen crescent moon.

…

On the second and first day of the Month of Blossoms, Angel had been depressed for half a month. On this day, the consequences of the spell's backlash were finally lifted.

He almost immediately threw himself into practicing magic.

He was the first to learn the basic techniques of epigraphy, the thermal melting method and the condensation method. In his plan, there are two necessary conditions for him to reach the top of the Sky Tower. One is an alchemical weapon; the other is a set of defensive spells.

Of these two prerequisites, learning the technique shouldn't be a problem, it just takes a while to become proficient in applying it. But Angel was a little unsure about the production of alchemical weapons. After all, it was the product of the combination of two civilizations, and its future was uncertain.

The most important thing is that Angel has no idea whether he can cross the threshold of the alchemical world. If you can't even become an alchemist apprentice, then all other plans are just a fantasy.

Therefore, Angel immediately focused all his attention on the thermal melting method.

The hot melt method is the first threshold for alchemy apprentices.

The essence of the hot melt method is actually the long-term resistance between the fire element and magic power, which produces extremely high heat. Then use the magic model to control the scope of the high fever and prevent it from hurting yourself.

This trick is exactly the opposite of the tricks of the three major structures. The trick model is not to construct the thermal melt method, but to limit the high temperature of the thermal melt method.

Angel took out a piece of paper, which was densely written with data and formulas. This is the model result he derived for the thermal melt method when the spell backfired a few days ago.

After memorizing a few key coordinates of the model diagram, Angel closed his eyes and entered a meditative state.

The thinking space has returned to clarity, and the "lollipop" he constructed is alone in the chaos. The singularity is slowly turning, purifying the original magic power.

Angel did not care about the singularity, but released pure magic power from the magic source and built a magic model of the thermal melting method.

With the positioning of the universal axis, the magic model was constructed in almost two to three seconds.

After the hot melt magic trick model was constructed, there was no abnormality. It just hung in the thinking space without collapse or disintegration, and there was no urge to release it to the outside world.

Angel turned the magic model to his fingertips, but there was still no feeling or any trace of the extraordinary.

"This model is indeed very different. Even if it has been suspended outside the body for a long time, it has not collapsed. It is as solid as a solid stone." Angel secretly thought.

Since the model couldn't see any problems, Angel simply started "warming up".

The simple explanation of the combination of fire element and magic power is to release the magic power outside the body and rub it with the fire element from the outside to combine with each other.

This step doesn't seem difficult, and the magic power output out of the body is minimal, but the patience and control he requires are difficult for ordinary wizard apprentices to achieve.

The so-called patience means to continuously output magic power and slowly warm up. The time required for this process is determined by the fire element content in the air. In places where the fire element is active, the preheating time is only a few minutes, but in places where the fire element is inactive, preheating may even take several hours, maybe more.

Basically, the patience step is not difficult for wizard apprentices.

But the control of the next step is the most difficult aspect of learning the fusion method, and it is also one of the reasons why alchemy excludes most wizard apprentices.

During the preheating process, magic power must be continuously output from the body to the outside. Although the magic power is consumed very little, the same amount of magic power must be continuously released to the outside.

A little more, a little less, even a little bit, will cause the preheating to fail.

Precise control of measurements is something that is almost difficult for a wizard's apprentice to do.

…

Angel also started to warm up, and the magic power was continuously output from the body to the outside. When he first came into contact with the fire element, it was easy to endure it.

But after 2 seconds, the preheating failed. The reason is the same as other wizard apprentices, the amount of magic power cannot be controlled accurately.

In the second test, Angel carefully released the magic power little by little. With his high concentration, he lasted this time for... 3 seconds.

Angel conducted the third, fourth... and tenth test, and the highest record was to maintain the magic strength for 4 seconds. Others basically hover for 2 seconds.

In places where the fire element is active, this preheating takes more than two minutes. But now he can't even break through 5 seconds.

Angel suddenly felt depressed. Didn't he have the talent to learn alchemy?

The magic power was almost exhausted at this time, and Angel was in a bad mood. He simply closed his eyes and restored the magic power through meditation.

In the blink of an eye, five hours passed.

During the meditation process, Angel's mood gradually calmed down.

He also wanted to understand that it was normal to be hit, and nothing could be solved overnight. He will continue to try. If there is really no way to control the power of magic, then it can only be said that he has no connection with alchemy.

At this time, the magic power in the magic source was abundant again. Angel took out the dry food and ate it while thinking about how to control the amount of magic power.

Controlling the measurement is definitely not something that can be done carefully. Angel had previously focused almost all his attention on control, and it was difficult to achieve perfect control.

Angel thought: Manpower is always exhausted, can we borrow external help?

Speaking of external forces, the easiest way to control the measurement is through pipeline limits. Just like drinking water through a straw, the straw can effectively limit the amount of water flowing out.

But it is impossible for him to insert a tube into the thinking space. Besides, can magic power be contained in a tube?

Pipelines...Limits...

Angel muttered it repeatedly, various images flashing in his mind. Suddenly, a picture full of dotted lines flashed through his mind.

"I thought of it! I can't insert a pipe, but I can make a pipe myself!" Angel's face flashed with excitement: "You can do it with the Vientiane Axis!"

The universal axis is the final expression of the thirty-six-bit spatial coordinate system positioning method.

The Vientiane Axis transforms the thinking space into a collection of countless dotted lines, and each point can be transformed into a spatial coordinate point through the Vientiane Axis. Angel only needs to construct a three-dimensional channel in the thinking space and use the universal axis as the measurement standard. The measurement of the magic output can be controlled!

Angel thought of this and immediately started experimenting excitedly.

It took half a day to create a passage determined by the Vientiane Axis, starting from the source of magic and connecting outward.

Angel took a deep breath and began to draw magic power from the magic source. He carefully paid attention not to let the amount of magic power spill out of the Vientiane Axis channel.

2 seconds, 3 seconds,...19 seconds, 2o seconds.

After 2o seconds, the preheating failed again.

However, Angel did not show a frustrated expression this time because he was very sure that he had solved the measurement problem! From 4 seconds to 2o seconds is the evidence!

The reason why he failed this time was not that the measurement was not well controlled, but that the rate fluctuated.

As long as the measurement problem is solved, other problems are minor problems.

It took some time for the rate issue to reach a basic balance with his constant attention.

When both the measurement and the rate were settled, Angel started the warm-up again.

2 seconds, 3 seconds,...19 seconds, 2o seconds...1 minute and 1o seconds...1 minute and 3o seconds...

At 2 minutes, Angel failed again.

But this time the failure had nothing to do with technology, but...his fingers were burned.

He has been focusing on solving the preheating problem, but he has forgotten one thing. The preheating position must be within the magic model, otherwise, it will only be a matter of time before he is burned.

…

The third day of the second half of the month of flowers.

Angel moved the stove in the kitchen to the basement.

Light a fire.

The scalding heat wave slowly spread in the basement.

Angel sat by the stove, closed his eyes and began to meditate. After about half an hour, Angel stretched out his spiritual tentacles and felt the activity of the fire element in the air.

——With the furnace as the center, the activity of the fire element is several times higher than before.

Angel felt that he was almost done, so he stood up and went to the pile of wooden boxes on the other side of the basement. These wooden boxes were filled with low-level materials purchased from Prome's alchemy shop.

Angel took out a black and red metal block from the wooden box.

This was Earth Demon Blood Copper, the most popular material he purchased. It is the lowest level in the blood copper series. It is a copper mine that is stained with earth demon blood and has been cultivated for many years.

The hardness and wear resistance of items made with earth demon blood copper will be greatly improved, and there is a very small chance of obtaining special effects.

Angel took out the Earth Demon Blood Copper and returned to the stove.

Angel used the thermal melting method to build a magic model, and then output magic power to slowly combine with the fire element, and time passed bit by bit.

Fifteen minutes later, the hot melt method takes shape!

Angel could feel the intense heat in the model at his fingertips. However, being restrained by the model, there was no sign of leakage.

Angel placed the Earth Demon Blood Copper in the thermal melting method.

As time goes by, the Earth Demon Blood Copper slowly shows signs of melting under the thermal melting method...