Synthesis of everything starting from models

The electrician was busy on the side, and Li Anchor stayed beside him for a while and found that even staring at him couldn't help him much, so he walked aside and picked up his mobile phone.

I opened the music note and found a well-reputed installed host on it, and then connected two desktop computers worth about 10,000 yuan. After all, the computers in the factory were not fully equipped.

After he placed the order, the electrician was still busy connecting the printer. He was a little bored and just wanted to walk around the factory to see how he should plan the layout of the machine.

At this moment, the electrician stood up from the distribution box, put down all the tools in his hands, and walked to Li Anchor's side.

"Boss, I just took a look at the hardware of the distribution box and calculated the rated power of your machine. I found that the circuit breaker, switch, and wiring in the distribution box are all a bit small.

Although I can just install it now, if it is used for a long time, these hardware will definitely cause problems.

So I'm going to go out and buy some suitable parts from a nearby hardware and electrical store. "

Upon hearing this, Li Anchor immediately came to his senses and said to the electrician: "Oh, then I'll drive you there, Master Gong!"

"No need, boss, that store is quite close. You may not be as fast driving a car as I am riding an electric bike. It's very fast!"

Li Ao listened to the electrician's answer and looked at the expression on the electrician's face that clearly didn't want him to follow. He immediately came to his senses and replied calmly.

"Oh, ok, then I'll trouble you, Master Gong!"

When the electrician heard what he said, his face immediately showed joy, and then he hurried away from here.

Why the electrician didn't want Li Anchor to follow him was of course because he didn't want him, the owner, to know the price of the materials he needed to use.

Regarding this issue, Li Ao didn't delve into it. For him, as long as he could do his job well, he didn't care at all about the little tricks played by electricians.

Looking at the place where the work was stopped, the electrician had completely dismantled everything inside the distribution box, so now even if he wanted to turn off the power, he couldn't use the light-curing printer.

It was quite boring to be in a factory without electricity, so Li Ao did not continue to stay in the factory. Instead, he returned to the car, started the car and turned on the air conditioner.

Feeling the cold air blowing on his face made him feel extremely comfortable, but the noise caused by the running of the car was a bit high. The interior panels inside the car made the sound of dinosaurs resisting the waves everywhere.

Listening to the noise from the interior panels and the exhaust pipe outside the car, Li Ao decided that as long as he completed the factory building and handed over a large number of models, he would start preparing the old guy himself.

Just when he was thinking wildly, the electrician had already returned on an electric bicycle. There were still a lot of parts in the basket. Li Ao looked at the electrician who came back, turned off the car and got off.

As soon as the parts were in place, the electrician returned to the distribution box and started working. Li Ao took a part inadvertently, looked at the bull mark on it, and nodded secretly in his heart.

Although he couldn't tell the quality of the parts, he still recognized the bull logo. Anyway, if he didn't know the quality, it was always right to choose a big brand.

An hour passed quickly like this. The electrician was stripping wires and installing wire noses, and quickly connected the cables to the distribution box.

Looking at the neat circuits in the distribution box, it was quite pleasing to the eye. When Li Ao saw the electrician nodding, he knew that the circuits had been installed.

"Boss, the electricity has been installed. Look..."

"Oh, okay, how much is it? Open the payment code and I will transfer the money to you!"

Li Ao happily paid the bill to the electrician. He didn't want to waste time on this little money. Now he just wanted to turn on the machine quickly and try out the effect of the metal laser sintering 3D printer.

After sending the electrician Master Gong away, Li Ao couldn't wait to close the door of the factory, and then hurried to the laser sintering printer that had just been connected.

With slightly trembling hands, push the power supply on the side of the printer body. As the printer is powered on, the machine immediately starts running.

As soon as the printer is turned on, like those printers in the past, it first starts the self-test process. Driven by the stepper motor, the high-energy laser emitter continuously positions itself in the printing area.

The self-test model is actually very fast, faster than all other printers of this type on the market.

Looking at the printer that had completed its self-inspection, Li Anchor took out several one-liter plastic buckets from the pile of boxes on the side. What was placed in the plastic buckets was none other than what the laser sintering printer needed. of consumables.

In these barrels, there are different powders, such as aluminum powder, titanium powder, nickel powder, iron powder, etc. There are not many groups of thickness, almost all of them are more than 100 mesh.

Li Anchor took out a bucket at random and was about to pour all the powder in it into the powder feeding cylinder, but after opening it, the several powder feeding cylinders in the printer confused him.

When he first started assembling, Li Anchor didn't notice that there were prescribed raw materials marked on the powder feeding tank, but when he came to add consumables, he saw it.

Since there is a mark on the powder feeding tank, just follow the mark and add it. Li Ao, who originally only wanted to pour iron powder into it, directly added aluminum, titanium, nickel and other metal powder into it according to the mark.

After filling the printer with consumables, Li Anchor took out a USB flash drive from his pocket. The USB flash drive contained the print file for the micro-mini engine that he had created alone.

As soon as the file was inserted into the printer, sure enough, the process was exactly the same as the one synthesized before, and smart formatting started immediately.

The printer's intelligence is very high, and Li Anchor doesn't need to interfere too much. He just needs to wait quietly for the printer to start running.

After the print file is intelligently formatted by the printer, the printer begins to officially run, and the laser emitter continues to move around in the printing area.

As for the area being irradiated by the high-energy laser, the powder spreading roller is constantly mixing the various powders in the powder feeding cylinder together, and then sending them to the printing area together.

Layers of mixed metal powders were spread on the printing platform, and high-energy lasers continued to sinter the powders together layer by layer. The dazzling light emitted made Li Ao dare not look directly at it.

This scene is just like electric welding. If people stare at electric welding, they will definitely hurt their eyes.

The high-energy laser is constantly shining on the powder layer, and the powder spreading roller is also spreading the mixed powder layer by layer. Under such circumstances, Li Anchor is looking at the inside of the printer through the protective cover that has a certain light-shielding effect. Print progress.

I saw a very small mini inline four-cylinder cylinder head, which had already begun to take shape in a very short period of time.