Take Off My Aviation Era

The CEO's words are not very harmful, but they are extremely insulting!

What is a hair dryer for beginners? Is it possible that these aviation manufacturers do not even deserve to make a hair dryer? You know that they are a manufacturer of aero engines, and they are playing with top-end high-end manufacturing. They actually say that they don’t even deserve to make hair dryers. This is where they are slapped, obviously they are hitting the face with an iron hammer. Well!

It is simply tolerable or unbearable!

So a person in charge of the aviation manufacturing plant who was a little impatient finally lost his patience. Before the chief teacher could finish speaking, he opened his mouth to defend: "Master, you are a bit biased when you are old. We are a domestic industrial sector. How can the manufacturer with the strongest technical ability in the field not even make a hair dryer?

Not to mention that Timsun brand hair dryers use ejection technology, but apply more advanced technology. I believe that as long as you give me time, our factory can also make products with excellent performance? "

"Chief Master~~~ We know that you can't rub sand in your old eyes, but you should also understand the actual situation of other domestic aviation development units!"

The person in charge of the Hangfa Manufacturing Factory who was the first to speak has not heard the voice, and the deputy director who finally caught the opportunity immediately saw the price of the needle: "If other factories also have opportunities like Ascendas Group, I believe other aviation manufacturers are no better. Anyone who is bad, after all, their abilities, skills, and qualities are there. What is missing is the authority and recognition like yours!"

As soon as the deputy director said this, the heads of the other aviation manufacturers immediately nodded like a chicken pecking at rice, looking at the confident appearances of each one, really like the flow of those draft failures, it is not that they are not working hard enough, and It is the lack of an opportunity to get ahead!

"is it?"

The chief teacher didn't get angry at the inverted black-and-white contrived behavior of the deputy director and the others, but instead smiled and asked.

"That's true, Chief Master, I dare to use my personality to vouch for you!" The person in charge of the Hangfa Manufacturing Factory who had just said the explanation hurriedly interfaced.

As a result, the general manager sneered and pointed to the Tengsen hair dryer in his hand: "Then you can try to make a batch of these hair dryers with T300 carbon fiber composite materials, and the price is controlled within 500 yuan. There is a 45% profit!"

"I... this... the chief teacher... uh..."

The person in charge of the Hangfa Manufacturing Factory who faced the chief executive heard what the chief executive said and wanted to continue to explain, but he didn't know how to say it. He really did not expect that the batch of Tensen brand hair dryers in front of him were actually It is made of T300 carbon fiber composite material.

I didn't expect that a hair dryer made of such advanced materials could have a profit of 45% at a price of 500 yuan.

You have to know that 500 yuan is RMB, not US dollars. At this price, you can buy a few kilograms of T300 carbon fiber composite materials. Even the domestic materials produced by Ascendas Group, the maximum is more than ten kilograms.

This thing is connected, assembled, solidified, re-repaired, machined, assembled... After a set of procedures, it is estimated that the optical consumables will cost more than 500 yuan. As a result, Ascendas Group can still guarantee 45 at this price. % Profit, what does this mean?

In addition to being able to independently produce T300 carbon fiber composite materials and greatly reducing costs, the most important thing is that Ascendas Group has mastered the state-of-the-art processing technology of carbon fiber composite materials, making the original manual bonding, cutting, and assembling traditions. The process is greatly simplified, and it is even possible to directly apply more advanced mechanized mass production.

So as to greatly reduce the production cost of T300 carbon fiber composite materials, this can ensure profits!

In other words, Ren Tengfei Group has almost made the T300 carbon fiber composite material into the price of cabbage, and can obtain excess profits in the price of cabbage.

This is the case for the small Timson hair dryer, and the WD-62MVP turbofan engine is naturally the same.

They are all veterans in the field of aviation manufacturing. The voice-over of the commentary talks about the Venturi effect and ejection technology. The person in charge of these aviation plants knows the general structure of the WD-62MVP turbofan engine.

It is nothing more than the whole aero engine, and a shell similar to the outer duct is built.

In this way, when the engine **** in air, the surrounding air can be sucked in at the same time, and the overflow temperature of the engine casing can be controlled in an air-cooled situation.

However, the principle of this structure is simple, but it is not easy to make it. First of all, the material of the outer shell must be light, otherwise it will affect the total weight of the aero engine, and then affect the thrust-to-weight ratio;

Secondly, the strength must be good enough. After all, it is an aeroengine component, even if it is only the outer shell, it also needs enough strength to ensure the overall structure of the engine.

Finally, and most importantly, that is that the cost must be controlled within a reasonable range. It cannot be said that for a performance, regardless of cost, the unit price of aero engines can be directly increased to the level of ordinary combat aircraft. Some are too much for the loss.

Therefore, it is necessary to do a good job of cost control under the premise of ensuring technology. This difficulty is not generally high. The person in charge of the aviation manufacturing factory asked himself that his own factory can never do both.

But Ascendas Group did it.

Where is the low cost of the Timsun brand hair dryer? See Weizhizhi, where can the ejection technology shell of the WD-62MVP turbofan engine be higher?

We must know that carbon fiber composite material is the best material for this kind of shell. Since Ascendas can greatly reduce the cost in the T300 composite material processing plant, it can be transformed slightly. The ejection shell of the WD-62MVP turbofan engine will also be Has a good effect.

After all, carbon fiber processing technology is a proper dual-use technology for both military and civilian use. It is only between the manufacturer's mind that the military and the civilians can only think of it. In that case, how can the cost of the ejector housing of the WD-62MVP turbofan engine be high?

Realizing this, the old face of the person in charge of the Hangfa Manufacturing Factory who had explained it was really red, orange, yellow and green one by one, embarrassingly returning to his hometown, it was really embarrassing to go to grandma's house.

The deputy director didn't get any better, because the chief teacher couldn't keep up with his words, and even the cost of the hair dryer could not be controlled. How to control the cost of aero engines?

On the other hand, ~www.wuxiaspot.com~ Isn't their aviation manufacturing factories not even able to make decent hair dryers? It's not that I don't work hard, but I don't have a chance. Now the opportunity is in front of us. Let's first reduce the cost of the hair dryer using carbon fiber composite materials.

However, just when the chief teacher talked about the pleasant conversation thoroughly again, Zhuang Jianye hurriedly came out and said, "Oh, chief teacher, you calm down..."

While speaking, he looked at the deputy director and the others: "Leaders, don't make it difficult for the chief teacher. It's all my fault, it's all my fault..."

When he said this, Zhuang Jianye looked completely sincere and fearful, and then faced everyone: "Or else, our WD-62MVP turbofan engine's ceramic matrix composite processing technology for the tail nozzle of the turbofan engine is willing to transfer free of charge to the brother factory that intends to take over... …"

As soon as this remark came out, the deputy director and others couldn’t help but shocked. Just as they were about to say two words of praise, Zhuang Jianye’s next sentence completely broke them: “However, this technology is currently at the world’s leading level. The related equipment and Only our group can produce raw materials, and I can give the technology free to brother factories who want to take over, but the equipment and raw materials must be purchased from our group, not much, and the one-time investment is only 70 to 8 billion..."

txt download address:

phone-reading: