Tech Translator

After Li Hao finished his breakfast, he asked the security guard Ji Lin to take Zhou Yunsheng to the company. He went to the rented laboratory.

Today I made an appointment with Professor Wang Rongzhe to come to the lithography machine project laboratory together, and they will discuss cooperation related matters.

Li Hao drove to the laboratory quickly and saw that the employees were also going to work at this time.

This laboratory has fully activated the scientific research assistance system, and it can be seen that the employees' eyes are equipped with special glasses.

Most people have glasses between orange and green, and few have glasses above blue.

As soon as Li Hao entered the laboratory, he saw Sun Kai, the person in charge of the lithography machine project, in the hall.

After Sun Kai saw Li Hao coming to the laboratory, he walked up to Li Hao and said pleasantly: "Director Bi Ye and his physics laboratory are really good. Now they have successfully developed the most important light source for the lithography machine.

I tried their newly developed stack laser, which can easily process silicon-based semiconductor materials and carbon-based semiconductor materials. It should be able to process the carbon-based chips that Wang Rongzhe needs."

"Your project is progressing very quickly, and this momentum must be maintained." Li Hao praised first.

He then reminded: "Don't be complacent about developing an accessory. The lithography machine is a complex machine, which requires very high processing accuracy and assembly accuracy.

We just made all the accessories. In the end, the industrial assembly failed, and the entire lithography machine failed.

What I am most worried about now is the machining accuracy and assembly accuracy. Our company is completely new in this field. "

"Our project team members have also discussed in detail, and the final opinion is to adopt the processing and assembly method of artificial intelligence and industrial robots.

Adjust the accuracy of the robot step by step. The failure rate may be high in the early stage, but only one success is required. Through the memory of artificial intelligence, the success rate of more than 99% can be achieved. "Sun Kai happily talked about the technical plan they were going to implement.

After Li Hao finished listening, he thought carefully for a while. This approach was found to be the easiest for their company to implement.

He smiled and agreed: "Then try this method first. It is better to succeed. If it is not successful, you can only train technicians for a long time. Let them reach the level where they can assemble lithography machines."

While they were discussing, they heard a noise at the door of the laboratory.

Li Hao turned to look at the gate, and found that it was Professor Wang Rongzhe who brought his doctoral students to the laboratory.

He also saw Bogo and his colleagues carrying a large box.

Li Hao immediately walked over to greet them. He shook hands with Professor Wang Rongzhe and said, "Welcome to our laboratory. I hope we can reach a consensus today."

After finishing his polite words, Li Hao pointed to the big box and asked, "Professor Wang, what's in this box?"

Wang Rongzhe said with a smile: "This box contains carbon-based semiconductor materials produced in our laboratory.

Yesterday, Manager Sun Kai sent me a message, saying that the light source for processing carbon-based chips has been developed.

I took this opportunity to process a batch of carbon-based chips. Verify that the carbon nanotransistor I designed can be processed correctly. And test whether the microstructure of the carbon-based chip design can complete its expected function. "

When Li Hao heard Wang Rongzhe's words, he quickly waved his hands and said, "Professor Wang, you are too anxious. Our lithography machine project only completes the light source, and the grating material is still a semi-finished product for a very short time.

Other systems are under development, and even a prototype lithography machine cannot be assembled, and now processing carbon-based chips, isn't this a joke? "

Wang Rongzhe immediately explained: "Chairman Li thinks too much, we can't ask to process carbon-based chips now.

What we want to process is a carbon-based chip simulator, which is essentially a carbon-based chip.

It's just that the size of the carbon-based chip is one square centimeter, and the carbon-based chip we want to process is one square meter.

A lithography machine is required to process micro-carbon-based chips. To process this huge chip simulator, it only needs the light source and grating combination that meets the processing requirements to complete the processing, and the accuracy of the equipment is not high.

This chip simulator is mainly to verify the performance of our carbon-based chips and various microstructures.

Check whether it can meet the requirements of our design, so that we can adjust the design drawing of the carbon-based chip in time. The only requirement for it is that it can be used normally. "

After Li Hao heard what Wang Rongzhe said, he looked at Sun Kai and asked, "Can our company's current technical level meet the processing requirements that Professor Wang said?"

Sun Kai tapped his fingers in the air a few times, and Li Hao could tell that he was asking the engineer. Among them, the engineer who mainly asked was Feng Fengfeng, an expert supported by the Chinese Academy of Sciences.

After reading the summarized data, Sun Kai said with a smile: "Our company can fully meet the requirements of Professor Wang, but the grating material is not stable now, and it is necessary to replace the grating immediately after processing a chip.

The estimated cost of processing the entire carbon-based chip is 8.9 million yuan each. Professor Wang needs to process several chips. "

After Wang Rongzhe heard it, he frowned and said, "Is it so expensive to process a carbon-based chip now? Can it be cheaper."

Their project still doesn't have much results, although the above said it will be re-examined. However, research funding has not yet been allocated. He is also preparing to process the chip simulator, and he needs funds for this product, but he is very tight now.

Li Hao saw Sun Kai's perplexed gaze and Professor Wang Rongzhe's distressed expression.

He said directly: "What money do you want? We are partners. If we process a few chip simulators, our company will donate it to Professor Wang for scientific research."

This is a small amount of money for their company, and Li Hao thinks it is very worthwhile to give this as a gift to promote the relationship between the two parties.

What's more, when we talk about cooperation later, the plan proposed by Li Hao will also damage Professor Wang's interests to a certain extent.

Wang Rongzhe said embarrassedly: "How can I use your company's money."

Li Hao said with a smile: "It doesn't matter, it's just to test the performance of the light source and grating of our lithography machine."

At this time, Sun Kai came over to Li Hao and said, "Mr. Li, the light source has been prepared in the laboratory, and the grating material is being configured. It can be processed immediately."

After hearing this, Li Hao asked Wang Rongzhe, "Professor Wang, do you bring the design drawing of the carbon-based chip. It is best to have an electronic version of the design drawing, which can be easily recognized by artificial intelligence."

Zhu Yanbo walked up, handed a chip to Sun Kai, and said: "This is the design drawing of a carbon-based chip, which contains a hexadecimal code, which can be directly read by machines and equipment."

Seeing that the preparations before processing have been completed, Li Hao instructed Sun Kai: "Then start processing the chip simulator now. Also test the basic results of the lithography machine project now."

Sun Kai immediately agreed, "I'll start making arrangements now, and I can start processing in five minutes."

At the same time, he asked Zhu Yanbo and the others to hand over the materials to the robot that came to transport the items.

Zhu Yanbo told Sun Kai that this material needs to be processed in a dust-free environment and must be absolutely clean.