Technological Hegemony

In Luo Jia's miraculous brain like a hard drive, the robot blueprints are ready-made and can be used directly.

The main difficulty lies in the compatibility of parts. After all, the parts used by extraterrestrial civilizations in the design and the parts that Luo Jia can buy from the earth must have a huge difference in terms of shape and power.

The key is to learn the design ideas of extraterrestrial civilizations, and the height of thinking will determine the height of products.

In this regard, Luo Jia undoubtedly has a huge advantage. Even if all the robot experts in the world are added together, they are far inferior to the folders in Luo Jia's head.

As for the parts, it's all tears.

The most important components of the robot are the harmonic geared motor and the RV geared motor.

Harmonic motors have low power and are used to drive small devices such as eyes and knuckles.

The RV motor has strong horsepower and drives large equipment such as robots.

At present, the main players of these two motors in the world are companies from Neon Country.

There is a spinea company in Germany. The quality of the RV motors produced is good, but the sales volume has been so-so, and it can't compete with the neon counterparts.

Neon Kingdom Teijin, Hamenaco, Sumitomo and other giant companies have almost completely monopolized the reducer market.

There are more than 200 domestic reducer manufacturers, and the more powerful companies include Lude, Laifu, Benrun, Han's, Xintuo, Kangzhen, Qinchuan, Shuanghuan, Hengfengtai, Zhongdida and so on.

But it is very disappointing that these domestic manufacturers all imitate the design of the Neon company, heat generation, noise, and service life. In these important technical indicators, they are far behind the giants of the Neon country.

Therefore, Luo Jia has no choice at all. Harmonic deceleration can only use Harmonaco, and RV deceleration can only use Teijin. As for other parts, there are basically no domestic products.

It has to be said that in the high-precision machinery industry, our country has a long way to go. The precision of the Teijin reducer can even reach the micron level, and its strength is quite terrifying.

When Luo Jia was preparing to enter the robotics industry, he spent a lot of time doing pre-research, and most of the blueprints were completed.

Now he spent another night to finalize the plan, and then asked Li Moran to take him to the local high-precision processing factory in Wuxi.

Wuxi is a base city for the electromechanical industry. There are quite a few factories in this area, but most of them do not meet Luo Jia's requirements. In order to ensure quality, Luo Jia's requirements are very strict.

Eventually they found a company called Taidong Precision.

The owner of the factory is an uncle in his fifties named Pang Yunhai. He was a mechanical engineer in a state-owned enterprise. He went into business twenty years ago, specializing in the processing of precision parts.

Pang Yunhai excitedly led Luo Jia and Li Moran to two huge five-axis CNC machining centers, "You must have never seen this before, right? DMG CTX2000, and DMG CTX 4000, are awesome German goods, with a complete knife magazine, cost about eighteen million."

"In Wuxi, I want to say that I am ranked second. No one dares to say that I am ranked first. No matter how complicated parts you want, I can make them for you, but the price is not cheap. After all, the parts I use But high-end German stuff."

Luo Jia shrugged, "The precision of DMG's CNC machining center is top-notch, but their largest shareholder is Neon Country Mori Seiki, and they have always cooperated with Neon Country in terms of technology."

Pang Yunhai didn't expect that Luo Jia, who looked very young and had a background in computer science, knew mechanics?

The major shareholder of DMG is indeed Neon Country. Pang Yunhai often brags to people that his machine tools are pure German products. Only Luo Jia knows that these two machine tools are actually a mixture of Germany and Neon Country.

Luo Jia went on to say, "Although I have no feelings for Neon Country, in the field of high-precision CNC machine tools, Germany has actually lagged behind Neon.

Even non-standard machine tools made in Switzerland are more accurate than German ones. "

"The American man-made F22 uses Neon SNK five-axis dragon boring and milling. Boeing's main supplier is Yamazaki Mazak. The most accurate parent machine in the field of ultra-precision machining in the world is JTEKT, which is specially used for making lenses. , and the accuracy is eight times higher than that of the three major military artifacts."

"In addition, there are Amada, Danuo, Makino, Komatsu, Aida, Mitsubishi, Sodick, Citizen, Fuji, Toshiba, Brothers, Tsugami, Ryuzawa, Enzhou, Okamoto, Miyano, Huo Cisco, Sugino, Nakamura Tome, Mitsui Seiki, Toyowa, Matsuura, Takamatsu, FANUC, Ikegai, and many other giants in the machine tool field.”

"Such a powerful lineup is not only incomparable to our country, but even the Germans must be amazed. It is also a late-developing country in East Asia. The Neon Country is really far ahead of us in the field of machinery. I don't know how many years it will take. Only then can we catch up."

What Luo Jia said was very objective, completely out of emotion.

Blind arrogance is stupid. When you want to enter an industry, you must first have a clear understanding of the current status of the industry and know where the gap is, so that you can try your best to shorten the gap.

Luo Jia used not much time to do a lot of research in this area.

After listening to Luo Jia's words, Pang Yunhai was very emotional. Most people of his age were very patriotic. The list of unattainable giant companies made Pang Yunhai a little desperate.

"Don't be too pessimistic. The road has to be taken step by step. Neon Country is very strong in the field of machinery, but the development of our country in the IT field is not bad. We all use mobile phones to pay now, and Neon Country still uses cash. ” Luo Jia said.

The old and the young chatted very well. Of course, Luo Jia would not tell Pang Yunhai that he wanted to build robots, but only said that he wanted to produce mechanical arms.

Pang Yunhai patted his chest and promised to mill out the best parts for Luo Jia, and find the most experienced engineer in the factory to work on Luo Jia's order.

Walking out of Taidong Precision's gate, Li Moran felt that Luo Jia had taught him a lesson again.

The ghost knows how much industry research Luo Jia has done behind his back. He is more confident now. It seems that Luo Jia chose this time to enter the robot industry and has made full preparations.

Luo Jia's learning speed is really too fast, and Li Moran secretly made up his mind to make up the mechanical course when he went back. In front of this terrifying boss, if he doesn't study for a day, he will fall behind.

After returning home, Luo Jia passed the order drawings to Pang Yunhai. The humanoid robots were too dazzling to manufacture too many. Luo Jia planned to try to build a hundred sets first.

But the spare parts cannot be prepared according to 100 sets, and some spare parts should be set aside, so Luo Jia ordered 120 sets.

There are still a lot of other preparations to be done. The reducer needs to be ordered from Teijin and Harmonaco dealers. In addition, Luo Jia is still preparing a high-power wireless charging system to solve the problem of robot energy consumption.

With the help of Li Moran, Hong Tao, and other colleagues in the company, Luo Jia spent two days to complete the procedures and purchases, and then sent Li Moran and his colleagues back to Shanghai to prepare for the establishment of the mechanical department.

This time, the deans Sha Zhan and Gu Pengdong will come forward to ask for some top talents in the Department of Mechanical Engineering from Fudan University or Jiaotong University.

Hong Tao stayed at the factory with two colleagues from the administrative department to receive the purchase orders and at the same time find someone to overhaul the equipment in the factory, ready to start work at any time.

After making these arrangements, Luo Jia took the high-speed train directly from Wuxi to go home, and was going to have a good talk with Comrade Luo Ning and let him manage the factory.