Chapter 1290 Too Many Elements—Excessive (4K)

Some of the students who heard this conversation at the side felt extremely violent.

The manufacturers that the special equipment research and development center cooperates with are all Bluestar's top factories. For example, if a high-temperature alloy manufacturer wants to be a high-temperature alloy supplier for this project, it must go through an extremely demanding and complicated verification process.

First of all, the trial sample needs to be delivered to the forging factory established by Titan Star and accepted for inspection. After the inspection is passed, the forging will be inspected by the parts factory of Titan Star, and then processed into parts.

This inspection process requires at least nine rounds, that is, the metallurgical plant needs to provide nine or more batches of alloy ingots to the forging plant to make forgings, pass inspections at various levels, and finally make qualified parts.

Only when the finished products of each batch of the above-mentioned links fully meet the process requirements can they be included in the procurement system of the special equipment research and development center.

Moreover, due to the high barriers to entry in the industry, Daxia has been implementing license management for weaponry research and production activities at present, and it is not allowed to engage in corresponding production activities without obtaining a license. Those engaged in the production activities related to bacteria must pass strict examination and obtain the qualification of bacteria workers.

The special equipment research and development center uses Kyushu Science and Technology’s confidential qualification channel for bacteria engineering. The communication and cooperation are all bacteria engineering companies. These companies have strong R\u0026D, management and quality control capabilities, and they are not short of such a small amount of money.

The reason for accepting the cooperation of Kyushu Science and Technology Special Equipment R\u0026D Center is entirely because the cooperation between Kyushu Science and Technology Titan Star Community and them has been very successful over the years. Everyone has obtained advanced technology and equipment, so they are willing to join the thief of the Special Equipment R\u0026D Center again. Boat.

After denying this batch of materials, Li Zhaotang, the head of the laboratory, said with emotion: "The core barrier of deformed superalloys lies in the raw material smelting process.

Vacuum induction smelting, electroslag remelting, and vacuum arc remelting triple smelting processes are used to prepare large-size ingots and master alloys, and after specific forming processes to complete the forming and specific control of the microstructure, the alloy ingots are finally prepared into various sizes Standard material.

The preparation of various high-temperature alloys we need has different process barriers from raw material smelting to different forming processes. The process progress of these factories largely depends on the harsh requirements of our laboratories for materials.

After all, these reworks will allow the technical department of the factory to conduct trial and error, so as to obtain marginal parameter optimization, and the construction of heavy-duty processing equipment and the accumulation of manual experience can only grow through hard work.

To love these factories, we should be strict with them.

To love our project, we should naturally pay close attention to every gram of material used in the project.

I heard that the factory is already carrying out research work on triple pure smelting of high-temperature alloys. According to theory, compared with the current double vacuum smelting process, the stability of the triple smelting process will definitely be significantly improved, and it will further improve carbides. Uniformity of distribution and thermoplasticity.

Make more demands with the factory. Not only do I need a pass with two digits after the decimal point, but I also need a breakthrough with one digit before the decimal point.

The material of our research project will not only be used in the nozzle part in the future? The parts that can be seen everywhere in the vector engine more or less need materials with similar performance, so everyone should not ignore these things.

When I was working in the Titan Star Department, Mr. Gu once said something that I still remember. He said, "Every small detail in scientific research is a boulder on our normal road. Every detail that is dealt with is a huge stone on our normal road. Opened up a smooth road. '

At the beginning, the mecha research and development department hastily ended the research and development of the mecha mechanical structure and materials. Although the final product was very satisfactory to the fungi and ordinary people, the last "Wukong" mecha designed by Mr. Gu himself and supervised by him was not Under the same craftsmanship, it can present a force value that ordinary mechs cannot compete with, relying on the calculation of every link.

So after that, the mech research and development department seemed to disappear, and did not stand up to speak at many meetings. Every time they spoke, they asked for people and equipment.

I think that with their hard work, the next version of the mecha might actually be allowed to enter the regular use.

More than half of this year has passed. When our company starts to summarize the major R\u0026D projects of this year, if we lose face on the vector engine project, I am afraid that there will be many fewer engineers willing to come to our laboratory next year. "

Li Zhaotang's tone was emotional, but his movements did not stop.

After taking out the tablet and shooting the material in front of me, I clicked the fail button and gave it a score of 4.5, um, 10 out of 10.

The materials have not been sealed and returned, but the order score has already been presented in the internal management system of a certain fungal enterprise.

After seeing the score and the three big characters [unqualified], a staff member with a calm breath became confused.

"He made it, and it's unqualified. The real Nima is a thorn in the ass! If there was such a thorn in my camp back then, I would have to let him run dozens of kilometers with weight for extra training!"

After scolding a few times, the staff member with a slightly angry face picked up the keyboard on the side and replied very skillfully: "Our company has learned that, please return the material according to the agreement, and after the inspection is completed , our company will restart the furnace for your company..."

Witnessing the "scientific research work" of Li Zhaotang, the head of the Vector Nozzle Materials and Cooling R\u0026D Laboratory, Gu Qing nodded in satisfaction, and then quietly left the laboratory.

He is not afraid of being held by this senior engineer who likes to hold his hand, discussing technology, industry, and the international environment all the time. He just thinks that this person's work performance is already very good, and there is no need for someone outside the industry like him. people come to point fingers.

After all, it was Gu who did the things that made those fungus factories headaches, so Gu Qing walked away lightly.

After leaving the laboratory in five steps and two steps, Gu Qing went straight to the [special flight equipment pilot function research laboratory].

The office area of ​​this laboratory is not on the upper floor of the building, but on the third to sixth floors underground, with a total of more than 10,000 square meters of experimental area.

On the way, Xuanwu was also sensible enough to collect some materials and provide them to Gu Qing to watch.

Although Xuanwu sorts out several relevant documents of major laboratories every day, these documents are all general descriptions, and certain details and "unimportant" items have been deleted, so as to ensure Intensive information.

From the information collected and sorted out this time, what Gu Qing sees are real gaps and historical issues.

At present, there is a gap between Daxia's bacteria machines and Uncle Sam's scale in terms of quantity, but the total difference is the total difference, and the technical gap is extremely vague, and even many models have already surpassed the American machine by a small amount.

According to Xuanwu’s statistics, the total number of Uncle Sam’s bacteriostatic machines in active service is 16,236, accounting for 27% of the global active bacteriostatic machines, while the total number of Daxia’s active bacteriostatic machines is 5,254, accounting for only 7% of the global active bacteriostatic machines.

According to the subdivision of models, fighter jets are the main force among the Bacteria aircraft, with a total of 1,781, but the number is less than 60% of that of Uncle Sam in the same period, and the number of other models is far behind.

In addition to the quantity, the advanced nature of the Great Xia bacteria aircraft has already shown outstanding performance. Although it is currently in a critical period of replacement, the installation of new fighters is accelerating, and the number of bacteria aircraft such as special aircraft, transport aircraft, and bombers is also increasing. increase.

The second-generation aircraft has just been replaced with the third-generation aircraft, and many third-generation aircraft have begun to be replaced with fourth-generation aircraft. When these fourth-generation aircraft were still precious treasures, the fifth-generation aircraft J-20 was also listed in the open Pack.

Because Daxia Junfang has a small stock of bacteria machines, it can be replaced and upgraded more quickly.

Over the years, the cooperation with Daxia Junfang has deepened, and Gu Qing also learned something: the ratio of the purchase cost of the whole aircraft used by bacteria to the maintenance cost in the life cycle is close to 1:1.

That is to say, if Kyushu Technology can guide these fungus factories and material factories in Daxia to upgrade their technology, and if they have enough excellent metal patents, there will be a lot of small money in the trillion-dollar maintenance market of Daxia’s aero-engines in the future. Fall into the pocket of Kyushu Technology.

No, on this road, Kyushu Technology has quite a few competitors.

For example, Western Superconductor, which was established 21 years ago, is currently the only enterprise in China that has realized the commercial production of low-temperature superconducting wires in Daxia, and it is also the only company in the world that produces niobium-titanium ingots and wires through the entire process.

Kyushu Technology has cooperated with this competitor on many projects, such as the research and development of high-end titanium alloy materials and low-temperature superconducting materials.

It is not only a competitor for making money, but also a cooperative friend in the research field.

This complicated relationship did not make Gu Qing feel troubled, but made him feel much more relaxed.

After all, I have now focused my attention on the big project of developing the moon. In other resource fields, it is a good thing to have stable teammates to provide high-quality materials.

The sound insulation effect of each room in the special flight equipment pilot performance research laboratory is so good that when Gu Qing entered the observation area of ​​a certain laboratory, he couldn't hear any voices from the experimenters inside.

It's just that on the examination table, the experiment participants, who seemed to be tightly bound like zongzi, lost control of their facial expressions.

That distorted expression made Gu Qing feel a little panicked when he saw it.

This is the special feature of the special flight equipment pilot function research laboratory. The vector nozzle material and cooling research and development laboratory upstairs, the vector nozzle direction change mechanism design and control system research and development laboratory are all researching and developing physical materials. .

However, this special flight equipment pilot function research laboratory is inhumanely conducting various tests, training, development and re-testing of "biological materials".

The Future Warrior project is a human enhancement project jointly developed by Gu Qing and Junfang. It has a very high level of confidentiality, but it is very humane to the experimenters during the progress of the experiment project. Every experiment will fully respect the personal dignity of the experiment participants, and do their best to ensure that the experimenters physical and mental health.

Even in every drug test, the benchmark test will be carried out according to each person's physical fitness after the animal experiments of mice, rabbits, and monkeys are completed.

In this slow and scientific progress, Gu Qing, as a project participant, already possesses physical abilities far beyond ordinary people.

Compared with the experiments of the special flight equipment pilot function research laboratory and the future fighter project, it seems very rough and cruel.

Although the experiments in this laboratory are all based on the physical fitness of each person after the animal experiments of mice, rabbits, and monkeys are completed, the success criteria of animal experiments are completely different from those of the Future Warrior project team.

In the future warrior project team, the last level is the monkey experiment. Any problems in the monkey's intelligence, cognitive ability, and body will affect the hearts of countless scientists, biological experts, and doctors. After all these abnormalities are dealt with, to enter the next stage.

In the special flight equipment pilot function research project, scientists only need to record the last hurdle—in the monkey experiment, the monkey’s special reaction, after confirming that there is no danger to life and cognition, they can enter the next link and start human testing.

Of course, the choice of human beings, the experimental material of this laboratory research project, is not as harsh as that of the Future Warrior project. Basically, the orangutans that are very close to humans are used.

Even on the sixth floor, Gu Qing saw several identical-looking orangutans placed in the cradle.

"Your intuition is correct. Cosmic primordial ray radiation has no benefit to orangutans, but after several generations of reproduction of these gene mutations, some genes that are better for the current environment will be retained, and even become dominant genes.

Because of being soaked in the cradle for a long time, the lungs of the twenty-second generation experimental specimens produced larger air bubbles, and at the same time, the teeth degenerated seriously, but the pineal gland grew a little bigger.

Every time we wake up these orangutans, their eyes gradually lose their confusion, and some of them have even comprehended addition and subtraction within ten by themselves.

Without any teaching from us, they have been observing us. Although they cannot walk under the limitation of the cradle, in our surveillance video, five orangutans can walk on their hind limbs in their sleep. Forelegs off the ground. "

Listening to the person in charge of the special flight equipment pilot function research project beside him excitedly giving various examples, the expression on Gu Qing's face has never been relaxed.

After the other party finished the recent introduction, Gu Qing, the founder of Kyushu Technology, turned his head, stared at the person in charge of the experimental project, and said coldly: "So you haven't cultivated a cyborg orangutan that can conduct space experiments?"

The person in charge of the experimental project was stared at by the cold eyes, and suddenly he was in a trance.

"We are still unable to understand the origin of orangutan intelligence, so it is currently impossible to develop technology that can erase orangutan intelligence while allowing it to retain physical mobility for a long time."

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like