The Hero Who Troubles the Heroes

"The hero who troubles the heroes (

In the early stage of development of materials science, there are many surprises caused by various accidents. Maybe adding bird droppings to boiling slime glue will also produce miracles.

Charles held a palm-sized hard white slime board in his hand, and he tapped here and there from time to time. He never imagined that he would get such a thing after adding the wrong additives.

As soon as his thumb and forefinger worked hard, the hard rubber plate was not deformed much, and a corner was broken off. It seems that the hardness of this rubber sheet is not low, but it is somewhat brittle.

Langsha asked aside, "Can this kind of hard glue be used?"

Charles pondered and said, "It's still brittle. I think it will perform better with a skeleton in it."

Langsha asked, "What are you going to use for the skeleton?"

This time, Charles was stumped. The material he was familiar with, such as fiberglass cloth, was not available in this world.

"I'll look for it," Charles said. "You need to find a way to prepare enough hard plywood raw materials. I'll start the experiment when I find the skeleton material."

Langsha can only agree: "Well, I will prepare the additives today, and tomorrow Enrico and the others will start mass production when they come back."

After confirming that the amount of additives was sufficient, Charles left Langsha's office.

It's less than half an hour before the meeting just now. Everyone's task in the morning is to make all kinds of preparations, find people who are looking for people, prepare materials and materials, and start working in the afternoon.

On his way to the faculty's office building for the professors' help, Charles pondered about the reinforcement material used for the hardboard.

Although the material used to make the hull this time, the relationship between the hard slime glue as the base and the reinforcing material in the skeleton is like concrete and steel bars, but the processing is almost the same as the production of FRP.

The process of making FRP is not difficult for him. When he was working in his last life, he participated in the production and installation of FRP ventilation pipes in a project.

The reinforcing material we are looking for now needs to have sufficient tensile strength first, secondly, it needs to have sufficient bonding strength with the substrate, and thirdly, it is best to have ready-made, and the price should not be too high.

Constrained by current productivity levels, Charles finds this material a bit difficult to find.

At this moment, the faint scent of perfume floating around caught his attention.

A pair of twin girls in beautiful dresses walked past him with umbrellas.

A pair of eyes instantly focused on the stockings under the girl's skirt, and it should be possible to use fabric as a reinforcing material.

It's just that the silk stockings wrapped around the girl's jade feet are too smooth, I'm afraid it won't be able to effectively bond with the slime glue. Moreover, silk and spider silk are afraid of high temperature, and the hot slime glue may cause damage to it.

After rejecting silk and spider silk, Yiyan searched for inspiration on the way to campus.

At this time, a roll of cloth in the hand of a girl who was approaching caught Charles's attention. It was a linen cloth with sparse warp and weft, and the other side of the cloth could be seen when the distance was close.

Charles pondered that if the linen used for mosquito nets was strong enough, it seemed like a good reinforcement.

Many professors in the academy will handle official business in the office on the morning of the rest day. Charles came to the floor where the professors of materials science were located and found Professor Henry Batisia with the note that the principal had just written by himself.

Professor Batisya is the chief professor of materials science in the college, a big ben in steel materials science. When Charles knocked on the door of the office, he was sitting behind his desk and wiping his glasses.

The door opened automatically, and the guest was a little surprised, because the door was opened by a robotic arm fixed to the wall behind the door, which automatically closed the door after Charles entered the office.

Charles came to the very long desk and handed the principal's note, explaining his purpose.

"Sit down." Professor Batisya asked him to sit down on the chair opposite. "You can drink tea or juice, or wine."

Charles replied: "Tea is fine, I don't drink at work."

The professor was very satisfied with his answer and said, "The rule of 'no drinking when you go to work, no drinking when you go to work' is something everyone should abide by."

Charles was not surprised by what the professor said, because there was a golden hammer the size of a palm on the desk, which exuded the red divine power of the God of Forging, proving that the other party was the priest of the forging temple.

Professor Batisya pressed a few buttons on the row of buttons beside the desk. The large box at one end of the desk was partially opened, and several slender metal arms stretched out from it. In front of him, another arm poured a small spoon of tea into the teacup, and the last arm held a steaming kettle and poured half a cup of boiling water into the teacup.

Charles was startled by his hand, but his face remained unchanged as he watched those robotic arms shrink back~www.wuxiaspot.com~ and finally picked up the lid and put it back.

Professor Batisya said with a smile: "My tea here is not very good, please forgive me."

Charles also smiled and nodded, this tea pouring machine is indeed a sharp tool to improve the grade of the office.

He put a hard slime board on the table and talked about the idea of ​​using reinforcing materials to strengthen the material's toughness.

Professor Batisya nodded slightly while holding the teacup, and asked, "Do you want to use steel wire to insert it, like reinforced concrete?"

As a big bull in the material science industry, you will naturally know about "Charles steel bars".

Charles replied: "I'm not going to use metal materials this time, because the adhesion between the slime glue and the metal is not enough."

As a result, Professor Batisya looked at this guy with a "hehe" and said, "That is to say, if the two can be tightly condensed together, then it is considered qualified?"

Charles nodded and replied: "Yes, in addition to the production relationship."

Professor Batisya got up and left the desk, and took out a thick book from the data cabinet on the side.

Charles was surprised by the weight of the book when he took it, and even more surprised by its contents when he opened it.

Each page of parchment in this book is fixed with a thin piece of metal mesh, the wire woven into the mesh is about the thickness of a hair, and the characteristics of these meshes are written in the blank space.

Professor Batisya said: "In recent years, the research on mesh armor is very popular. Our college has achieved a lot of results. I think it can be used this time."

Charles looked at the sample and was shocked, and found that he seemed to have neglected the magic technique of forging the temple, which seemed to be able to completely bond the two materials together.