The Life of a Gangster That Started In a Gun Shop

The next day, after sleeping until she woke up naturally, Ye Qing lay lazily on the bed and stretched. Then go downstairs to open the store door, wait for Conn and Harris to come in, and then go to wash.

Today, Chen Tuhao's family went out to play, and the auction for the sale of blue and white porcelain rifles has also been released. Ye Qing, who has been busy for a while, can finally rest for a while.

After washing up, he walked out and saw four tattooed men appearing in the store. Only then did Ye Qing think of forgetting to explain to Conn about the job training of Lacibe and their security guards. Fortunately, this matter is also simple, called Kang En, and after a general explanation, Kang En led the three to the shooting range behind the store.

He asked whether Harris and Sean, who were still in the hall, needed breakfast. After getting a negative answer, Ye Qing walked into the kitchen. I hurriedly picked up a handful of rice, put it in the rice cooker, and started to prepare the ingredients for this morning's fried rice.

Ye Qing was tired of eating instant food for three months. In addition, the food of the Silver Eagle Federation itself is indescribable. As early as World War II, three boxes of federal army rations were exchanged for one box of French army rations. This has not changed so far.

I still remember when I bought the goods, I saw the federal army C-level combat rations in the goods. Ye Qing was also very interested in unpacking a package to try it out, and finally saw the canned yellow bean mixture that looked like flying...

Um, in the C-level rations. Or chewing gum is better...raisins are also good....

While thinking about these terrible experiences, Ye Qing cut the onions, potatoes and other side dishes that will be used for the fried rice. But as he was cutting, Ye Qing always felt as if he had forgotten something.

This hazy feeling continued until Ye Qing finished breakfast. Only then did I remember that I forgot Hannah's brother's blue-and-white porcelain pistol...

Sighing for her toil, Ye Qing deftly threw the tableware into the sink. Then walk outside the shooting range and start lighting the brick kiln.

The structure of the M1911 pistol is not complicated. This old guy with a history of more than 100 years and older than Ye Qing's grandfather has also passed the copyright protection period. Its production structure diagram is also searched on the Internet.

But even so, the modification plan Ye Qing told David Koch last time was not just lazy nonsense.

Since the M1911 pistol uses a short recoil structure, the locking mechanism is a barrel offset type. As you can tell from the name, the core movement modules of the 1911 pistol are all unfolded around the barrel. But the barrel of the gun was an area that Ye Qing couldn't reach at this time.

There is no word on whether the high-toughness porcelain can reach the service life of a normal metal gun barrel. It is only a rifling machine, and Ye Qing does not have it now. Moreover, this kind of machine cannot be bought with money. If there is no weapon production license issued by the ATF, Ye Qing does not have the qualification to buy it. Manufacturers of machines will not take risks to sell equipment to Ye Qing.

Shaking his head, he threw these messy thoughts out of his head. Ye Qing took a brand new M1911 from the warehouse and walked into the studio.

Because only two parts of the sleeve and the grip clip are changed. Then dismantling the gun becomes very simple.

First, pull the slide back to make the pistol in your hand enter the empty position and hang up, and check that it is correct. Then, while pressing the recoil cap with one hand, turn the barrel shroud clockwise with the other hand. At this time, the recoil spring and the recoil spring pop up immediately.

Seeing this scene, Ye Qing did not rush to remove it. Instead, pull the sleeve back, and then pull the sleeve forward after removing the hanger lever. Take out the slide, barrel, hinge and other parts together.

Then he stretched out his hand to lift the recoil spring guide rod and pulled it out from the back. The next step is to directly remove the recoil spring and the recoil spring cap, and then rotate the front barrel sleeve that rotates clockwise in the opposite direction. That is, after turning it counterclockwise in place, pull out the barrel cover from the front.

At this time, inside the entire sleeve. In addition to the barrel and the hinge attached to the barrel, only the rear of the slide is used to be struck by the hammer and strike the firing pin of the primer of the bullet.

Holding the slide in one hand, press the barrel hinge forward with the other, and take out the barrel. Then pull out the needle and disassemble the upper part of the M1911, even if it is completed.

After completing this step, Ye Qing took out the laser measuring instrument that had been prepared, and a blank A4 paper. While outlining the three views of the sleeve's appearance with stick figures, record the measured dimensional data.

After this step, the next step is the grip clip.

In many people's minds, the grip clip is a purely decorative thing. In terms of function, at most, it makes the shooter feel fuller when holding the gun.

Ye Qing thought the same thing before, but when Ye Qing removed the clip with a screwdriver and saw its internal structure, she realized the fact that she was a younger brother. At the same time, I have to be amazed by the industrial design more than 100 years ago.

In addition to the traditional manual safety, the M1911 pistol is also designed with a concealed grip safety. Although Ye Qing did not study the M1911 pistol in the system training field, he had learned the weapon automation structure for so many days. Slowly, Ye Qing also saw the point.

The way this so-called grip insurance takes effect is not complicated. It's just that in the grip, a part called the grip safety transmission rod is added, and a protruding tooth is added in front of this part.

The result of this is that when the insurance is in the "launch" gear. If the grip is tightly gripped by hand, the grip safety transmission rod will be stressed, and the protruding teeth on the front of UU reading www.uukanshu.com will rotate to the trigger link under the action of force. At this time, pull the trigger so that the trigger rod can move back fully. Thereby, the trigger lever is driven to make the sear run, thereby liberating the hammer and completing the firing action.

If you don't hold the grip tightly when you shoot. This will result in insufficient force on the grip safety transmission rod, and the protruding teeth cannot move to the trigger rod. The subsequent trigger lever, of course, cannot be moved back in place, so there is no way to drive the sear to operate. Under the blocking of the sear, the hammer cannot reset and strike the firing pin. As a result, the bullets lying in the barrel of the gun cannot be ignited by the primer, and the bullets naturally cannot be fired.

After seeing this unexpected discovery, Ye Qing couldn't help but become interested in this gun. This ancestor's gun can last for so many years without being eliminated. In addition to its beautiful appearance and accurate shooting, it seems that there are some other good things in it that are not easy to find.

And after such a careful observation, Ye Qing really found another amazing design.

The location of this design is on the hammer, the core component of bullet firing. In addition to the normal card slot to be issued, the M1911 pistol also has a half-to-be-issued card slot that is rarely used and is extremely easily overlooked.

In order to find out the function of this card slot. Ye Qing brought an M1911 pistol from the warehouse again. After several trials, Ye Qing finally figured out its function.

On the one hand, this card slot ensures the safe carrying of the pistol when it is loaded, and on the other hand, it is also the most indispensable function in Ye Qing's opinion. That's when the hammer is about to be fired, assuming the hammer is in the ready-to-fire slot. If the stub iron accidentally falls off, then the stub iron will slide into the half-to-be-issued card slot to stop the sudden release of the hammer from hitting the needle in time, so as to avoid the occurrence of fire.

​​