Rebirth of the Auto Giant

Chapter 258 Brazing

This improvement plan requires the purchase of brazing equipment and a batch of brazing materials, which are currently not available in my country and must be imported.

Brazing is a high-tech precision welding technology developed in the 1970s. It is widely used in aerospace, aviation, automobiles, machinery, electronics and home appliances. Developed countries such as the United States, Japan, and the former Soviet Union are using brazing in

Work in this area was carried out earlier, and many scientific research results and products have been produced, and the serialization of brazing materials has been realized.

"Money is secondary. The main thing is that they won't sell you even if you are rich. It's really annoying for you to say that." Wang Shi thought to himself.

At present, these welding parts are all done by hand, relying on those advanced level 8 welders to complete the work themselves. This is already very rare. If there is a fault, just fix it. There is no way.

"I'm trying to think of a way. Don't have too high hopes. It may not work." Wang Shi thought of his partner, Cao Deshui, the boss of Honor Glass.

He had been able to obtain equipment for producing bulletproof glass before, but he wondered if there was any way to obtain brazing equipment and brazing materials.

"In this way, when the oil cooler is shipped from the factory, the water pressure is increased by 5%." Wang Shi said.

After talking about the oil cooler, let’s move on to the next one.

"Our airframe has experienced 6 major failures. The main problem was that holes appeared in the water channels of the airframe, causing water to enter the oil pan. In the end, we had to overhaul and replace the airframe for the customer. These 6 times were only within the three-warranty period.

Among them, there are also some products that are out of warranty, and there may be others that we don’t know about.”

"We have carried out professional technical research on this and improved some production processes, especially the sand turning materials in the sand turning workshop..." Xing Lizhong said.

This improvement plan proposes improvements to several components, including piston rings, intake valves, etc., as well as turbocharger rotor bearings, etc.

"Okay, you have done a good job. This is the job of the technical department. Based on the problems that arise when our products are put into the market, we then propose feasible and professional improvement plans. At the same time, we cannot be satisfied with the status quo and must continue to make improvements.

With local R&D capabilities, we can produce one vehicle and develop one vehicle."

"Technology is constantly developing, and our R&D center must also continue to develop its own technical level. In the next few years, computers and the Internet will become the mainstream. By then, the use of computers will greatly reduce everyone's work. Everyone must be mentally prepared for this and get computers.

All professional software can be used proficiently," Wang Shi said.

Finally, I handed the documents in my hand to my wife Zhao Min and asked her to apply for a patent. Some processes are the latest scientific research results of the R&D center and can be patented.

Back in the office, the operator in the service department, Gao Yaya, brought over a table summarizing the parts that had failed during the service process this month and showed it to Wang Shi.

The service department, sales department and R&D center are the three trump cards in Wang Shi's hand. Every month, he must summarize the work of the month.

"This dump cylinder has happened a total of 6 times last month and 8 times this month. The quality is not good. The seal and cylinder rod are of poor quality. The outer layer of chrome plating on the cylinder rod has fallen off, indicating that

If there is a problem with the quality of the product, report the situation to

Supporting manufacturers, ask them to improve immediately, and immediately stop this batch of accessories from this supporting factory until they can continue to use them after improvements." Wang Shi saw that there were many problems with the dump cylinders, and he came forward to four or five

Yes, the problem occurred after seven or eight hundred hours.

This shows that the quality of the product is insufficient in terms of reliability, or that the other party is cutting corners. You must stop cooperating with them immediately, otherwise it will affect you and increase maintenance costs.

Finally, Wang Shi also put forward some requirements for the work of the service department, and also made some suggestions for the training of the six newcomers, and then signed the above and handed it over to Gao Yaya.

"Okay, I'll report the situation back to them immediately when I get back." Gao Yaya stood aside nervously. When she saw Wang Shi signing on it, she breathed a sigh of relief, took the order, and walked out of Wang Shi's office.

"Huh." After exiting the door, Gao Yaya breathed a long sigh of relief, patted her chest, then left as if running away, and ran downstairs.

"It scared me to death." Gao Yaya returned to the service department, took a sip of water, and looked at Wang Mingjing, Huang Can and others, "At the end of every month, what I fear most is today. Every time I take a work order to

The factory director reported that it seemed like he had died once, it was so scary." Gao Yaya said.

"How could it be? The factory director has never scolded you. Why are you so afraid of the factory director?" Huang Can said with a smile.

"I'm afraid. Although the factory director doesn't scold me, he is very scary when he is sitting there. If he gets angry again, I will definitely collapse on the spot."

"I was relieved until I saw him sign."

Gao Yaya took a few sips of water, then cursed the manufacturer of the dump cylinder. While cursing, she picked up the phone and called, and told Wang Shi that they had stopped purchasing this batch of products. Finally, she asked

They improve the quality themselves and continue to cooperate until they are satisfied.

Although Gao Yaya is the operator of the small service department, her words are nothing like the cautious yellow-haired girl who was in front of Wang Shi just now. What she said made the other party stunned and quickly thanked her.

"Definitely, definitely. We will immediately recruit technical personnel to investigate and improve production and quality. Thank you for giving us a chance to improve." A quick thank you came from the other party.

The other party hung up the phone and immediately called a meeting to discuss the matter.

"This problem must be solved immediately. Tang Dynasty Company has now stopped using our products. If we don't improve production and improve quality early, everyone's wages will not be paid, and there is no money to pay even if they want to," the factory director said.

Now the products in the factory mainly serve Tang Dynasty heavy trucks, and now the other party has stopped purchasing, which means that there is no input during this time, and the wages of the entire factory's workers cannot be paid.

…

It was late June, and news came from screenwriter Liu Heng that the script for "The Big Sword King Five" had been written.

"Okay, I'll go over and have a look." Wang Shi heard that the other three were in Li Chengru's special clothing store, so he drove there with his bodyguard.

As an investor, Wang Shi has a strong say. Liu Heng introduced: "In the past half month, I have consulted a lot of historical materials, coupled with Mr. Yang's dictation, and wrote a script. Mr. Wang will see if there is anything he is not satisfied with."

, put it forward and I will change it.”

Wang Shi took a look.

The whole story develops from its origin to its climax, and the transitions are very smooth.