However, she did not pass immediately but stood in front.

This is also for safety, no one knows what kind of things will happen if you go directly.

However, she stood there for 10 seconds and nothing happened.

Yun Shishi frowned. Did she think wrong?

Do you have to go directly there?

He turned to Lin Yinyin and said, "Don't move here yet."

Lin Yinyin didn't speak, but nodded with serious eyes.

Seeing her attitude, Yun Shishi felt relieved and quickly took a step forward.

Sure enough, as she thought before, the moment her foot stepped on the scratch, she heard the sound of metal friction in her ears.

I guess some mechanism was activated.

Yun Shishi did not go over immediately, but instead put his feet back, wanting to see what it was.

If you are dealing with robots, you can try it.

Yun Shishi was also observing the robot's weaknesses.

Because although the iron dwarves outside Junmian have been cleared away, the big robot is still on the field.

Daqing is an internal and external mechanism.

Seeing that she was paying attention to her, Yun Shishi decided to go there first and explore the way for her.

The speed is not fast, but it is not slow either. The surface of the ax is smooth and looks very sharp.

The other interlaced marks were probably made by some kind of weapon.

Yun Shishi began to check the situation outside. After the two systems were synchronized, she could see the situation outside and Jun Mian could see the situation inside.

There are about 10 interlaced cracks in this section.

The head is pointed and there are two buttons near the handle.

In fact, it was fortunate that Lin Yinyin and Yun Shishi were of similar stature. Otherwise, judging from the speed and frequency of the ax's blows, the possibility of Lin Yinyin being able to come over was very low.

This time the ax did not withdraw after being touched, but continued to swing back and forth in front of the two of them, like a pendulum.

Apart from that, she couldn't think of any other possibilities.

…………

"They haven't finished processing it outside yet, so we have to wait."

The speed was really fast, but it quickly shrank back.

The robots in the tunnel before were obviously insulated, but this one doesn't seem to be.

The two stood at the corner and did not move forward.

Yun Shishi liked Lin Yinyin's knowledge and did not reply, but continued to watch the system synchronization screen.

Seeing that Yun Shishi was reluctant to enter the next passage, Lin Yinyin felt something was wrong, "Sister Yun, has something happened??"

The first one is passed.

At the same time as she retracted her foot, a large ax appeared from the gap in the wall and struck directly against the ground.

After Jun Mian received the news from Yun Shishi, he quickly found the machine gun inside.

At least it won't be that when Yun Shishi's side passed the new mechanism, the previous iron dwarves on Jun Mian's side had not been cleared away.

If you guessed it correctly, this thing can be shot out, hit the target, and then turn on the electric shock function.

She walked over very quickly as if she was walking in an S shape.

Dare to love has been carved out by these axes.

It was better to test this time, and this time she stretched out an arm.

With the direction cloud, there was no delay and he went directly against the wall.

Mainly because Jun Mian couldn't do anything about it.

This gun is different from an ordinary gun, it looks like an ordinary stick.

The hammer in hand was also recovered from the weapons bank.

She was still able to do this. She saw the right moment and jumped directly over the range of the ax. When she passed by, the ax just swung back.

It seems that Lin Yinyin coming over won't be a problem.

The mechanism at the back was not activated immediately. She walked to the crack in the ground and still did not take any immediate action.

"Wait a minute and you'll see the right time." Yun Shishi told Lin Yinyin.

As time goes by, the pressure outside will increase exponentially.

But it is the kind that is really tight. If there is even a slight gap, it will be split in half immediately.

Yun Shishi looked at the position of the opposite wall, and it seemed she could pass it with her body pressed against the wall.

It seems to be the same as the robot in the passage outside, but if you look closely, there are still slight differences.

It took Yun Shishi a few minutes to pass the trap here. When he looked back, Lin Yinyin had already passed halfway.

Only then did Yun Shishi remember that Lin Yinyin didn't know what was going on outside, so he explained it to her, "Let's enter the passage. Jun Mian and the others will spawn robots outside."

Now it all depends on the individual's reaction ability, and Yun Shishi can't be of any help.

At least the fire and spikes in the previous one were really not that easy to deal with.

Lin Yinyin passed here much slower than Yun Shishi, but fortunately, she came here safely.

The robots in the passage cannot use electric shock, but the ones in the hall can give it a try.

When he reached the next scratch, Yun Shishi jumped a step without waiting, and went straight past it when the ax didn't appear.

Even if you get scratched, the consequences will be serious.

But now it's useless to think about this, I can only work hard to survive.

But this is also her guess. The robot is not reflective, so it should be missing an insulating film.

The mechanism was activated, and a giant ax struck directly from the wall.

In fact, she was still very scared. She really wished she had never been to a place like this in her life.

Yun Shishi thought for a moment and sent a message to Jun Mian, 'Try it with a stun gun.'

Jun Mian estimated that one turned on the mechanism and the other turned on the electric shock.

This level seems to be less difficult than the previous one.

Lin Yinyin also saw the difference in the mechanisms here. She never thought about relying on Yun for everything. She took a deep breath and said: "Okay, I know, Sister Yun."

She nodded to express her understanding, "Yes, I understand. I will leave whenever Sister Yun lets you go, and I will never make any decisions on my own."

There is an obvious gap where the tip connects to the gun body.

Now I understand where these scratches came from.

If the progress inside is too fast, the outside will collapse.

The movements should be slower, and Jun Mian's previous method of finding energy sources didn't seem to work.

Lin Yinyin understood, so she said that it would not be that simple to give a place.

This way both sides can be much safer.

There is a kind of electric gun in the equipment bank, which was originally used to electrocute fish.

If you simply press the shock button, you will be shocked directly.

Jun Mian faced the position of the robot's arm and pressed the button on it.

But there was no response. It seems that the button below is the launch button.

Jun Mian quickly pressed the button below, and the spikes, along with a chain, pierced straight to the target position.

Today’s update is complete, thank you for your favorites, comments and votes.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like