Urban: I can inherit wealth

"Brother Hai replied that he had arrived in Tanzania and was preparing for the factory.

He plans to first recruit a group of security personnel and train them into armed security guards."Black Hawk said

"Well, just let him do what he wants, Qianqian said to the president."Lin Feng nodded.

Now that the construction of the domestic arsenal is on track, Tanzania will also start.

It's just that the environment there is relatively less stable, and a group of armed security guards have been trained.

This is entirely so that after the factory is built, it can get on track as quickly as possible.

……

At the door of Building 1, Jiang Feng got out of the car, looked around, followed Lin Feng's car, and went up to meet it.

Still wearing smart professional attire, Jiang Feng seemed to be in a good mood at this time.

"Find me?"Jiang Feng asked.

On the way to the company just now, Lin Feng just asked him to come to Building 1. She came over without asking any questions.

"Send you a gift."Lin Feng led Jiang Feng into Building 1

"The robot we talked about last time?"

"Um. Lin

Feng nodded slightly and entered the robot laboratory.

In the laboratory, seven robots stood quietly in a row, three men and four women, with their eyes closed.

The male robot was relatively taller, 1.85 meters, and the female robot was only 1.7 meters..

This is the first batch of war robots produced, and its appearance is still covered with artificial skin.

If you don’t take a closer look, it is difficult to recognize that this is a robot.

This is convenient for hiding people’s eyes and ears. After all, you can take a robot with you wherever you go. , will pay great attention to

"choose one." Lin Feng said

"this."

Jiang Feng pointed to the robot on the far side.

The female robot is pretty, not as stunning as Xiong Da, but still pretty.

On her arm, there is a blue flower the size of a thumb, like a tattoo. This is hers. Distinctive marks on the body.

Several other robots have the same body shape, but their appearance has their own unique features, which are easy to identify.

"Press and hold here to start, press and hold to turn off. Lin Feng pointed at the switch of the female robot.

Jiang Feng reached out and touched the slightly bulging button in the groove, and looked at Lin Feng jokingly:

"You have a lot of bad taste. The switch button is set here?"

"I have to consider practicality. It's too obvious. If others turn it off, there's no need to play it. Lin Feng spread his hands and said.

Ten seconds later, the female robot opened her eyes and looked at Lin Feng.

"gentlemen."

The female robot spoke to Lin Feng.

Lin Feng nodded slightly and turned on the robot's information entry function.

"When all robots are activated, they will default to me as the one with the highest authority.

You can enter your identity information now. After that, you can command her.

Without modification of my information, it cannot be taken away by others.

However, her intelligence is not as strong as Xiong Da. After all, Xiong Da is a bit special.

After entering the information, Jiang Feng smiled and said,"She will be called Xiaoqi from now on.""

"Pick out two outfits for her."

Lin Feng pointed to several sets of clothes displayed in the glass cabinet next to him. They were clothes specially designed and made for robots.

"I took Xiaoqi back to handle work. Call me if you need anything."

When Jiang Feng saw Xiao Qi put on his clothes, he smiled at Lin Feng and said seriously,"Thank you for your gift. I like it very much.""

After that, he took Xiao Qi and left outside the robotics laboratory without looking back.

"Xiong Da, release the design drawings of the 3D printer."

Lin Feng put on his experimental robe, put on his goggles, and began to conduct research on nanoscale 3D printers.

The technical bottleneck of current mainstream 3D printing technology is the relatively slow operating speed and poor resolution.

When more information is needed, For high-level solutions, 3D printing technology creates structures layer by layer.

When creating structures, insufficient resolution is the main reason for low efficiency. The nanoscale 3D printing technology obtained by the system uses ultra-short extreme ultraviolet light for curing.

Forming nano-scale products.

However, after studying so many things, laser is one of Lin Feng’s best technologies. The laser research on intelligent projection technology has allowed him to have a thorough understanding of laser technology and has accumulated a lot of corresponding technologies.

Nano-scale 3D Printing technology, for Lin Feng's technical reserves today, is mainly about resolution.

There are also issues about new materials, as well as ultraviolet ink (UV ink) and curing degree.

Among the technologies obtained, there is a UV ink The new formula is called electronic-based ink.

Under the bombardment of high-energy electron beams, the double bonds of monomers or polymer materials are released.

Free radicals are generated and then polymerized. The principle is similar to EB ink.

The formulas of the two are different, and the effects are also different.

According to The information obtained by Lin Feng shows that the degree of curing of electronic-based inks is close to 10%, which is higher than that of EB inks.

Moreover, the applicable binders for electronic-based inks are not limited to acrylic resins and reactive monomers.

They are much higher than EB ink is much wider and suitable for most materials.

The design conditions of the 3D printer itself are also different. These ultra-precision equipment have very strict environmental requirements.

After determining the technical direction of the 3D printer, Lin Feng started designing it.

He hopes to have it as soon as possible. This nano 3D printer has been developed.

This is one of the key technologies for industrial upgrading.

With this ultra-precision printer, Lin Feng can completely break free from restrictions, and most of his research will soar at a high speed.

Lin Feng enters the research state, completely Forget about the outside world.

And the outside world is not peaceful, especially in that corner of Africa.

The news of Angola Diodin’s death caused violent shocks within Angola.

In just one day, various reports appeared on the local news in Angola Different voices.

Some Diodin supporters have begun to organize demonstrations.

More and more people believe that this is a murder.

It seems that there is an invisible hand that makes the fishing boat and the investigation proceed in the direction that people speculate.

On the third day after Diodin's death, the murderer was caught, and he was an agent of the Angolan authorities.

As soon as the news came out, the whole of Angola was shaken, and the matter instantly became global news.

Many Western media began to criticize Ango

This was a premeditated murder. Among the civilians, those who opposed the Angolan authorities began to organize large-scale demonstrations, demanding that Vassolun step down.

However, not long after the parade, Vasolun asked Angolan The people of Gora gave a speech that lasted about 40 minutes on live television.

They denied involvement in the incident and called on all parties to calm down and wait for the matter to be investigated.

Diodin's party publicly stated that it did not accept Vasorun's remarks and demanded that he step down immediately..

The controlling hand aroused public indignation, causing riots in Angola, and then the march turned into a violent protest. The escalating protests forced Vasolun to send police to disperse the protesters, and the situation was developing out of control. _Feilu reminds you: three things about reading - collection,