Wizard: I Brought the Wrong System

The hand of magic power, as can be seen from the name, can be released with any magic power.

　　 But if other magic powers are used, the magic power will collapse after being exposed to the hot iron juice. This will not only cause the increase of the magic consumption, but also cause the collapse of the magic structure in severe cases, causing the magic backlash.

　　 If you use the fire magic power to release, the right amount of high temperature will make the fire element more active, thereby reducing the loss of magic power.

　　 But there are gains and losses, the active fire element will also make the magic hand more difficult to control.

　　 Staring closely at the molten iron juice, Yarrow carefully handed out the magical hand he released.

　　 caught it!

　　 Yaluo was overjoyed and didn't dare to relax at all, and immediately grabbed him by the hand of magic.

　　 Now, Yarrow wants to move it to the shaping table.

The 　　 shaping table is also an indispensable tool for novice alchemists. Its function is to generate a repulsive force to make the material suspend in the air.

The scorching heat caused Yarrow's face to see fine beads of sweat. He stared at the mid-air, and the dazzling liquid was slightly shaking, like holding a bowl of soup, holding his breath, and stepping softly. He didn't dare. There is the slightest slack.

　　 The energy expended in this process is no less than fighting an extremely fierce battle.

Because whenever the molten iron touches the edge of the magic hand, that part of the fire magic power will be more active. Yarrow must reduce the magic power of that part, and when it shakes, he needs to restore it to normal. Degree.

　　 The iron juice is constantly swaying, and Yarrow needs to constantly mobilize the output of magic power. The whole process is like hitting a mole, high and low, constantly ups and downs.

　　 Yarrow's reaction speed is also faster than ordinary people, otherwise ordinary people really can't do this!

　　 "Finally moved over."

　　 The complex magic patterns on the shaping stage release a faint light, and the dazzling iron juice quietly floats above, freely releasing its own heat.

　　 Yaluo took a long sigh of relief, checked the profuse sweat on his forehead, looked at the heating platform that was less than two meters away, and was puzzled.

　　 "Is it so difficult just to move this far? How does a normal apprentice do it?"

　　 Yarrow picked up the "Introduction to Alchemy Manual" on the side and looked through it purposefully.

　　 Yes, Yarrow has not finished reading this book.

　　Because of learning in different ways, the memory depth obtained is different.

　　 Generally speaking, the normal order of arrangement is: listen

　　 This is because, in different ways, the size of the activated area in the brain is different.

　　 It's better to say it a hundred times than to do it again.

　　 Encountered a problem~www.wuxiaspot.com~ Solve the problem, and go through it this way, and the effect will be better than ‘reading’ books for as long as possible.

　　 "When moving the high temperature solution in the initial stage, you need to concentrate the magic power at the bottom, and then move the magic hand quickly. When it stops at the end, the normal magic power transfer sequence of the magic hand is..."

　　 Yarrow...

　　 is really a good way. In the process of fast moving, the solution is squeezed together with acceleration. As long as it reaches the shaping table, the solution can be suspended by the force of the shaping table, and then the inertia can be offset.

　　 Hmm... This is the disadvantage of rushing to use it without reading the book.

　　 Yaluo took a deep breath, repeated it several times, and used the magic hand again, and then read the "Introduction to Alchemy Manual" while performing preliminary shaping.

　　 "When the metal is still at a high temperature, it is difficult to shape it. If the magic hand is proficient enough, you can directly shape the object into the desired shape, and then release the ‘rapid coagulation technique’ on it..."

　　 The book made sense, but Yarrow couldn't do it, so he chose the method taught later-wait for the iron to cool.

　　 "When the metal cools to a certain extent, its solid properties begin to appear, but it has not completely solidified, like soft soil, and it can be shaped at this time."

　　 Zero-level trick-the power that the magic hand can exert is only about five pounds. Compared with the metal cooling speed, the time it can operate is very small.

　　 "It's just that at room temperature, this state is maintained for a very short time, and it is best to release the ‘hot melt’ technique to keep it warm..."

　　Understood, Yarrow smiled confidently and closed the book.

　　……

　　 Yarrow watched silently, floating in the air crooked iron rod.

　　The first-level juggling hot melt is much more difficult than the zero-level juggling. Although Yaluo is very familiar with the zero-level juggling, he still failed too many times when he used the first-level juggling for the first time.

　　 Seeing that the iron juice has cooled, in a hurry, he made such a strange object.

　　 Yes, Yarrow already wants what he wants to do.

　　 The purpose he thought was to attract Bosco's attention, and naturally he had to make something novel.

　　 It is like an ordinary apprentice. For the first time, only a garbage weapon was made, and then a great opportunity for performance was lost.

　　 "It seems that I can only remelt, but before that, I have to practice the heat melting technique."

　　Yaluo has produced many times. He made molds and poured iron juice into it, but he restrained them.

　　 He can't take shortcuts. At this time, the production process is already training.

　　 It takes a lot of time to make the mold itself, and wizards rarely need a lot of molds to make.

　　Because of the acquisition of extraordinary materials, there is a lot of randomness. In many cases, the things obtained may only be made once.

　　 Even if there are a lot of repetitive extraordinary materials, it is difficult for a single wizard to obtain it, and it will naturally attract the attention of the powerful wizard alliance.

　　 So most of the mold making modes only apply to the Wizarding League.

　　 Zero-level trick, a single use probably only uses a little magic.

　　 The magic power of a single use of the first-level trick is about three points. At the same time, thermal fusion is also a continuous trick, and it will continue to consume one magic power every minute.

　　 Even with Yarrow's current fire magic power~www.wuxiaspot.com~, it is only enough for him to perform a complete alchemy.

　　 "Would you like to use skill points to directly rush the hot melt technique?"

　　 Yarrow hesitated a little, the shortcut was right in front of him, but he was a little reluctant.

　　 Just by looking at the increase in experience value, it can be seen that it will be more and more difficult to obtain the subsequent experience value, not to mention that Yaluo doesn't know how many levels he can reach.

　　 What if level 50 is the limit?

　　 Or the limit is one hundred?

　　 After thinking about it, Ya Luo gritted his teeth, and decided to use it!

　　 Isn't the gold finger used to quickly improve strength in weak situations?

　　 When I become stronger, in this extraordinary world, I might be able to forge gold fingers by myself!

　　 Not to mention, this was the first level one trick I learned. It was much more difficult than level one. I really have to wait for myself to learn slowly, and I don’t know how long it will take.

　　 Use skill points to quickly learn first, and the time saved is enough for yourself to learn more later, but you don’t know how many other first-level tricks.

　　 Therefore, Yarrow’s current problem is how to design the heat melting technique into a skill move.

　　Thermal fusion technique produces a temperature of more than five hundred degrees, and the skill moves must be released close to the body. What should be considered so that you will not burn yourself, and it is best to have enough lethality.